14 1LE back from Lethal Racing

[aces82]

Originally Posted by WiredAVS

Welcome to the LTHL1LE club...I tried to get by the shop yesterday to check it out, but missed it. I wanted to hear and check it out in person. Sounds good on the PC, but never quite like the real deal! Enjoy

I had them do the build based off your set-up. Shawn recommended the B&B and I'm glad I listened.

[honor first]

Originally Posted by aces82

It's the kit from Big Worm and it's film

did you do it yourself? im nervous to try due to the complexity of the tail light design

[aces82]

I did it myself and I would suggest using a heat gun instead of a hairdryer. At first with a hairdryer it was difficult on the deep curves on the inner portion of the RS tails. Once I used my heat gun it became much easier. Also if you call them or email them their customer service was really good and they answered all my questions. Just take your time and don't freak out if you get bubbles, they are easy to get rid of.

[SGDM]

Originally Posted by honor first

did you do it yourself? im nervous to try due to the complexity of the tail light design

They used my car as the prototype for the vinyl and I have talked a couple other guys through the process, not that hard, just take yer time. A heat gun is key and keep it wet until you get it aligned…easy day.