4" Dual / Quad tips - Page 2 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

zkdreads · 06-02-2011, 10:02 PM

Quote:

Originally Posted by bmorecam

what is the best tool to use to cut the plastic valance? im about to do this mod but a little different than others with oversized oval tip. I think its like 6" across. Also, looking at your pic from the top shouldn't it be shorter on the outside and longer on the inside to go with the curve of the valance? It look good and different either way tho..

its VERY hard to trim an oval big enough for quad tips and look half way professional so i just cut the square out on the ends and used one the sides on the original curves. hope this helps. good luch

bmorecam · 06-04-2011, 03:19 PM

zkdreads, did you also use dremel to cut? how much does a set of dremel usually go for and is there anything else I can use to cut it with? The plastic seem real thick. circulating saw would be too much for this right?

CamaroC-17 · 06-04-2011, 03:42 PM

Quote:

Originally Posted by bmorecam

zkdreads, did you also use dremel to cut? how much does a set of dremel usually go for and is there anything else I can use to cut it with? The plastic seem real thick. circulating saw would be too much for this right?

A good one at lowes that will do this job is about 40 bucks. Dremmel is the brand and it's nice. I have one. More expensive ones have higher rpms to take on bigger jobs

bmorecam · 06-04-2011, 04:02 PM

not too good with tools, I just remember having a set back in the days that came with alot of different small pieces. Thanks, I can justify 40 bucks and maybe even a little more.

zkdreads · 06-06-2011, 01:20 PM

yep i used a dremmel. my coworker had one he barely used so i borrowed his. i would say buy one and then return it. just clean it up real good lol

2SSRS@Gen5diy · 06-24-2011, 09:59 AM

Quote:

Originally Posted by BigRed585Lbs

Try these. I've used them before and they're very good.

http://tips.byethost4.com/dualpair.html

The site you have a link does not work ones you go to order, its to bad, lots of ppl ask me for the tips.

ArmoSS · 07-12-2011, 12:29 AM

Bump...hope someone has a new link for 4" dual tips.

CamaroC-17 · 07-12-2011, 07:38 AM

I found this. Looks like its a y adapter. tips are seperate which isnt a big deal.
Its 4 inch in and 4 inch out though
http://www.xtremediesel.com/silverliney2universaldualtipadapter.aspx

http://www.xtremediesel.com/silverli...ipadapter.aspx

bmorecam · 07-12-2011, 08:59 AM

almost forgot..thanks for the dremel tip. it worked out very well..

bee sting · 07-12-2011, 10:30 AM

Quote:

Originally Posted by bmorecam

almost forgot..thanks for the dremel tip. it worked out very well..

Nice job !

BigRed585Lbs · 07-12-2011, 12:18 PM

Closest thing I could find to that quality was Solo Performance"s T601-3L and -3R stainless steel tips, 3" inlet and dual 3 1/2" outlets.

Sorry about SSClones. They're great tips, but evidently he's having some problems with PayPal and his website.

CamaroC-17 · 07-12-2011, 01:13 PM

Why couldn't you just get or make a y adapter and use 4 single 4 inch tips? I have 4 inch tips

Sent from my SAMSUNG-SGH-I997 using Tapatalk

69TA · 03-30-2014, 08:35 AM

I know this is an old thread
But if anyone still need some real Corsa Pro Tips
let me know, I have some for sale.

They are 3" inlet and not the cheesey fake crap from China or Taiwan

CamaroChris89 · 03-30-2014, 11:07 AM

Changing to quad tips, are there any sound changes switching to them, i currently have flow masters on mine.

06-06-2011, 01:20 PM	#19
zkdreads Drives: 2010 Camaro LS V6 Join Date: Jul 2010 Location: Tampa, Florida Posts: 2,784	yep i used a dremmel. my coworker had one he barely used so i borrowed his. i would say buy one and then return it. just clean it up real good lol __________________ C-LO or Sonic "Without Struggle there is no progress" I am your best nightmare!

07-12-2011, 08:59 AM	#23
bmorecam Account Suspended Drives: jealous vendors mad!! HAHA!! Join Date: Jan 2011 Location: CYBERGMONSTER@GMAIL.COM Posts: 3,658 View My Garage	almost forgot..thanks for the dremel tip. it worked out very well.. Attached Images

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
V8 Camaro Performance Upgrades List	Milk 1027	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	93	08-30-2021 05:56 PM
quad tips installed!....pics!	ssmike	Cosmetics and Lighting Modification Discussions	41	05-23-2011 09:16 AM
ARK TRUE DUAL DTS and NII Catback Exhaust System. BURNT TIP and SLANT TIPS	ARK Performance	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	56	04-29-2011 01:22 PM
FS: Magnaflow 14386 Polished Stainless Muffler and 4" Tips	CarNutzCustomz	V8 - Engine, Exhaust, Bolt-Ons, Tuning Equipment	0	11-21-2010 09:53 PM
EXHAUST	Milk 1027	Wiki	2	03-07-2010 09:20 PM

06-04-2011, 03:19 PM	#16
bmorecam Account Suspended Drives: jealous vendors mad!! HAHA!! Join Date: Jan 2011 Location: CYBERGMONSTER@GMAIL.COM Posts: 3,658 View My Garage	zkdreads, did you also use dremel to cut? how much does a set of dremel usually go for and is there anything else I can use to cut it with? The plastic seem real thick. circulating saw would be too much for this right?

06-04-2011, 04:02 PM	#18
bmorecam Account Suspended Drives: jealous vendors mad!! HAHA!! Join Date: Jan 2011 Location: CYBERGMONSTER@GMAIL.COM Posts: 3,658 View My Garage	not too good with tools, I just remember having a set back in the days that came with alot of different small pieces. Thanks, I can justify 40 bucks and maybe even a little more.

07-12-2011, 12:29 AM	#21
ArmoSS Drives: 2011 Camaro SS Join Date: Feb 2011 Location: Burbank, CA Posts: 506	Bump...hope someone has a new link for 4" dual tips.

07-12-2011, 07:38 AM	#22
CamaroC-17 Formerly Camaroc5 Drives: 2010 Camaro LT/RS M6 Join Date: May 2010 Location: USA Posts: 1,647	I found this. Looks like its a y adapter. tips are seperate which isnt a big deal. Its 4 inch in and 4 inch out though http://www.xtremediesel.com/silverliney2universaldualtipadapter.aspx http://www.xtremediesel.com/silverli...ipadapter.aspx

07-12-2011, 12:18 PM	#25
BigRed585Lbs Drives: Sierra and Tahoe Join Date: Jul 2010 Location: By Marion, MS Posts: 1,324 View My Garage	Closest thing I could find to that quality was Solo Performance"s T601-3L and -3R stainless steel tips, 3" inlet and dual 3 1/2" outlets. Sorry about SSClones. They're great tips, but evidently he's having some problems with PayPal and his website.

07-12-2011, 01:13 PM	#26
CamaroC-17 Formerly Camaroc5 Drives: 2010 Camaro LT/RS M6 Join Date: May 2010 Location: USA Posts: 1,647	Why couldn't you just get or make a y adapter and use 4 single 4 inch tips? I have 4 inch tips Sent from my SAMSUNG-SGH-I997 using Tapatalk

03-30-2014, 08:35 AM	#27
69TA Drives: 1969 Camaro Z28 Join Date: Mar 2014 Location: Westwood NJ Posts: 3	I know this is an old thread But if anyone still need some real Corsa Pro Tips let me know, I have some for sale. They are 3" inlet and not the cheesey fake crap from China or Taiwan

03-30-2014, 11:07 AM	#28
CamaroChris89 Drives: 2011 Black 1LT, RS Join Date: Mar 2012 Location: NJ Posts: 81	Changing to quad tips, are there any sound changes switching to them, i currently have flow masters on mine.