Auto v6 to SS rear. - Page 2 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Superfly1 · 04-16-2014, 09:01 PM

I just finished this a couple months ago and love it. Sounds like you have everything you will need for it. I got a killer deal on the diff, shaft, & driveshaft from a friend that upgraded to a Gforce 9". All in all it took me about 5 hours by myself on jack stands to get this done. Mine still has the 3.27 gears in it. Since this is primarily my daily driver I didn't want to go too crazy. I might swap gears sometime down the road.

Good luck with the swap!

10RsCamaro · 04-16-2014, 10:07 PM

Quote:

Originally Posted by Superfly1

I just finished this a couple months ago and love it. Sounds like you have everything you will need for it. I got a killer deal on the diff, shaft, & driveshaft from a friend that upgraded to a Gforce 9". All in all it took me about 5 hours by myself on jack stands to get this done. Mine still has the 3.27 gears in it. Since this is primarily my daily driver I didn't want to go too crazy. I might swap gears sometime down the road.

Good luck with the swap!

I'm sure I will be asking you and many others questions about the install. Plan to do it next week if everything goes smoothly

Sent from my iPhone using Tapatalk

Superfly1 · 04-16-2014, 11:03 PM

Quote:

Originally Posted by 10RsCamaro

I'm sure I will be asking you and many others questions about the install. Plan to do it next week if everything goes smoothly

Sent from my iPhone using Tapatalk

No problem... feel free to pm me if you have questions

Sent from my SAMSUNG-SGH-I337 using Tapatalk

SIXJAK · 04-17-2014, 12:55 AM

Quote:

Originally Posted by JDP Tyler

IMO, leave the differential bushings stock. They will introduce a lot of unnecessary NVH for little to no benefit. I typically only recommend them to high HP drag racers.

Best regards,

Tyler
888-308-6007

Words of wisdom. I replaced mine with Pfadt's and I don't see any difference at all. Money wasted IMO.

10RsCamaro · 05-01-2014, 10:56 PM

Ok guys! Update time. Driveshaft, differential, and axles are here. Just need to grab the hubs and any thing else can people recommend? A part number for the hubs is somebody has would be nice. I want to make sure I'm buying the right ones.

Stay tuned for 1/4 runs after the install

Sent from my iPhone using Tapatalk

kjkjr27 · 05-01-2014, 11:06 PM

In the process of buying a diff with 3.91s and bushing already installed...just gotta get hubs, driveshaft and those nuts.

What are others doing about a tune? Won't the speedo be off?

10RsCamaro · 05-02-2014, 09:43 AM

Quote:

Originally Posted by kjkjr27

In the process of buying a diff with 3.91s and bushing already installed...just gotta get hubs, driveshaft and those nuts.

What are others doing about a tune? Won't the speedo be off?

I have trifecta and just got back in touch with Vince for an update. I want to order these hubs/bolts, just making sure I have the right ones before I pull the trigger.

Sent from my iPhone using Tapatalk

kjkjr27 · 05-02-2014, 10:25 AM

O so you were able to hear back from Vince?

HP Turbine · 05-02-2014, 11:05 AM

Quote:

Originally Posted by kjkjr27

In the process of buying a diff with 3.91s and bushing already installed...just gotta get hubs, driveshaft and those nuts.

What are others doing about a tune? Won't the speedo be off?

Don't forget the SS axles. I don't know what trifecta does. but once hp tuners is all set it should be easy.

kjkjr27 · 05-02-2014, 11:37 AM

Quote:

Originally Posted by HP Turbine

Don't forget the SS axles. I don't know what trifecta does. but once hp tuners is all set it should be easy.

Yea I may end up waiting for HP to install the rear end. I already have a lead on some axles just gotta meet up with a club member when we are both free and get them.

HP Turbine · 05-02-2014, 01:25 PM

You can't beat free!

10RsCamaro · 05-02-2014, 03:20 PM

Quote:

Originally Posted by kjkjr27

O so you were able to hear back from Vince?

Yeah I heard back a few hours after my email was sent. It is Friday so I don't expect anything until next week.

Sent from my iPhone using Tapatalk

kjkjr27 · 05-02-2014, 03:39 PM

Did you email him directly or go through BNR?

10RsCamaro · 05-02-2014, 04:26 PM

Quote:

Originally Posted by kjkjr27

Did you email him directly or go through BNR?

Directly. Are you having problems?

Sent from my iPhone using Tapatalk

04-16-2014, 09:01 PM	#15
Superfly1 Drives: 2010 Camaro 2LT #2197 Join Date: Nov 2009 Location: Wichita, KS Posts: 916 View My Garage	I just finished this a couple months ago and love it. Sounds like you have everything you will need for it. I got a killer deal on the diff, shaft, & driveshaft from a friend that upgraded to a Gforce 9". All in all it took me about 5 hours by myself on jack stands to get this done. Mine still has the 3.27 gears in it. Since this is primarily my daily driver I didn't want to go too crazy. I might swap gears sometime down the road. Good luck with the swap! __________________ CAI intake \| OBX LT Headers \| Flowmaster AT Exhaust \| Trifecta Tune \| SS Rear Diff, Axles & Driveshaft Zex 100 Shot Nitrous \| Konig Airstrike Wheels \| Custom Engine Cover, Fuse Box & Underhood Bowtie Eibach Springs & SS Sway Bars \| BMR Strut Brace \| Drake Shifter \| Vitesse Paddles \| 13.26 @ 105.88 mph

05-01-2014, 10:56 PM	#19
10RsCamaro Slow v6 Drives: Automatic Automobile Join Date: Oct 2011 Location: Nj Posts: 526	Ok guys! Update time. Driveshaft, differential, and axles are here. Just need to grab the hubs and any thing else can people recommend? A part number for the hubs is somebody has would be nice. I want to make sure I'm buying the right ones. Stay tuned for 1/4 runs after the install Sent from my iPhone using Tapatalk __________________ Full bolt on 2lt/Rs. Any questions? always a pm away! Obx/Mace/Rx/Mrt/Vararam/Bcam/4.11 Gears/SS Brakes USAF. Stationed in TX

05-01-2014, 11:06 PM	#20
kjkjr27 COTW 9/16/13 Drives: 2011 2LT/RS Camaro IOM Join Date: Jan 2012 Location: Syracuse Posts: 10,089	In the process of buying a diff with 3.91s and bushing already installed...just gotta get hubs, driveshaft and those nuts. What are others doing about a tune? Won't the speedo be off? __________________ Twitch Youtube

05-02-2014, 10:25 AM	#22
kjkjr27 COTW 9/16/13 Drives: 2011 2LT/RS Camaro IOM Join Date: Jan 2012 Location: Syracuse Posts: 10,089	O so you were able to hear back from Vince? __________________ Twitch Youtube

05-02-2014, 01:25 PM	#25
HP Turbine Boosted Drives: 2012 1LT RS... with snails Join Date: May 2012 Location: New Hampshire Posts: 1,455 View My Garage	You can't beat free! __________________ IPS Twin Turbos, Corsa Exhaust, Ported Throttle Body. 461 rwhp 443 rwtq!! Cameron Hass.ani

05-02-2014, 03:39 PM	#27
kjkjr27 COTW 9/16/13 Drives: 2011 2LT/RS Camaro IOM Join Date: Jan 2012 Location: Syracuse Posts: 10,089	Did you email him directly or go through BNR? __________________ Twitch Youtube