Eibach 1" drop - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

tainoxl · 06-06-2014, 12:38 PM

My CGM SS with Eibach prokit 1" drop

Loving the new Stance!

Jarret · 06-06-2014, 06:57 PM

Looking good, been thinking about dropping mine lately as well seeing the others on here with drop kits.

How long have you had them installed? If for awhile, have you noticed a difference in where you can drive it? My major concern of course is messing up the underside. I know 1" isn't much but just curious.

tainoxl · 06-06-2014, 08:32 PM

I installed the springs two days ago, pretty simple DIY. Ride is a lil stiffer than stock but that's expected. Watch out for parking barriers, car wash rails and high curbs. Other than that clears mostly everything. I think 1" to 1.5" is perfect for these cars.

Austin45 · 06-06-2014, 11:30 PM

How's your ride? Mine is complete trash after Eibachs.

tainoxl · 06-07-2014, 07:19 AM

Ride honestly doesn't feel to far from stock. Did clock your bushings and get an alignment yet. It is going to be a lil stiffer than stock. Small bumps will be a bit more pronounced, thats with any drop springs or coilovers. I would make sure all is seated correctly. I've driven cars slammed on coilovers as well as cut springs, my definition of a shitty ride might be different.

06-06-2014, 12:38 PM	#1
tainoxl Drives: 2010 CGM Camaro Join Date: May 2010 Location: Trenton, NJ Posts: 168 View My Garage	Eibach 1" drop My CGM SS with Eibach prokit 1" drop Loving the new Stance! Attached Images Last edited by tainoxl; 06-06-2014 at 02:16 PM. Reason: pic added.

06-06-2014, 11:30 PM	#4
Austin45 The Logistician Drives: 2012 LFX 45th Anniversary Join Date: Aug 2012 Location: Jonesboro, AR Posts: 864 View My Garage	How's your ride? Mine is complete trash after Eibachs. __________________

06-06-2014, 06:57 PM	#2
Jarret Drives: 2018 A10 ZL1 - Summit White Join Date: Jan 2014 Location: California Posts: 81	Looking good, been thinking about dropping mine lately as well seeing the others on here with drop kits. How long have you had them installed? If for awhile, have you noticed a difference in where you can drive it? My major concern of course is messing up the underside. I know 1" isn't much but just curious.

06-06-2014, 08:32 PM	#3
tainoxl Drives: 2010 CGM Camaro Join Date: May 2010 Location: Trenton, NJ Posts: 168 View My Garage	I installed the springs two days ago, pretty simple DIY. Ride is a lil stiffer than stock but that's expected. Watch out for parking barriers, car wash rails and high curbs. Other than that clears mostly everything. I think 1" to 1.5" is perfect for these cars.

06-07-2014, 07:19 AM	#5
tainoxl Drives: 2010 CGM Camaro Join Date: May 2010 Location: Trenton, NJ Posts: 168 View My Garage	Ride honestly doesn't feel to far from stock. Did clock your bushings and get an alignment yet. It is going to be a lil stiffer than stock. Small bumps will be a bit more pronounced, thats with any drop springs or coilovers. I would make sure all is seated correctly. I've driven cars slammed on coilovers as well as cut springs, my definition of a shitty ride might be different.