2LT Electronic cutout installation price - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

JCashel · 09-03-2014, 10:42 PM

i have one shop saying it will cost me $400 here on long island. is that excessive. what is reasonable

191185 · 09-04-2014, 05:24 AM

What exactly are you having installed, raising the electronic limiter from 118 to 155 like on the RS ?

RED_SS · 09-04-2014, 09:20 AM

Quote:

Originally Posted by 191185

What exactly are you having installed, raising the electronic limiter from 118 to 155 like on the RS ?

I think he is talking about exhaust electric cutouts to make it louder with the push of a button.

The shop I go to would probably only charge me around $150-$200. Ive know the guy for 10 years and bring him tons of business tho.

usnatclee · 09-04-2014, 09:29 AM

Have you heard what that sounds like on a V6? I'm not trying to start anything but it sounds terrible. I just hate to see someone waste money.

Aequitas & Veritas · 09-04-2014, 01:28 PM

Quote:

Originally Posted by usnatclee

Have you heard what that sounds like on a V6? I'm not trying to start anything but it sounds terrible. I just hate to see someone waste money.

Sounds good at idle and during startup. Under throttle it all depends on what you think sounds decent.

*boo KU

01pewterz28 · 09-04-2014, 02:11 PM

Is that $400 total with the E-cutout?? To cut the exhaust and weld in the exhaust cutout should be no more than $80 MAX. Now to run the wiring into the car I would do it yourself and still no way to install a cutout with wiring should cost that much.

09-03-2014, 10:42 PM	#1
JCashel Drives: 2013 Ashen Gray RS Join Date: Aug 2014 Location: Long island Posts: 3 View My Garage	2LT Electronic cutout installation price i have one shop saying it will cost me $400 here on long island. is that excessive. what is reasonable

09-04-2014, 09:29 AM	#4
usnatclee Drives: '12 2SS/RS, '13 Vette, '13 Wrangler Join Date: May 2012 Location: wherever the Navy sends me Posts: 740	Have you heard what that sounds like on a V6? I'm not trying to start anything but it sounds terrible. I just hate to see someone waste money. __________________ 2012 Camaro Ashen Grey Metallic 2SS/RS "Timberwolf". Custom exhaust, RX oil catch can and oil breather, CAI inc intake, SLP 160* thermostat, TSP 2" LT headers w/ off road pipes, custom cam, tuned. 467rwhp 450rwtq. 2013 Corvette Torch Red LS3. 378rwhp/375rwtq SAE corrected, tuned. ROCK CHALK JAYHAWK GO KU!

09-04-2014, 02:11 PM	#6
01pewterz28 #TeamBeckyD Drives: 2017 HBM 2SS Convertible A8 Join Date: Aug 2008 Location: Apopka, FL Posts: 10,496 View My Garage	Is that $400 total with the E-cutout?? To cut the exhaust and weld in the exhaust cutout should be no more than $80 MAX. Now to run the wiring into the car I would do it yourself and still no way to install a cutout with wiring should cost that much. __________________ #TeamBeckyD FIFTY HBM 2SS VERT

09-04-2014, 05:24 AM	#2
191185 Drives: 2010 2LT/RS 6A Join Date: Aug 2014 Location: Minnesota Posts: 203	What exactly are you having installed, raising the electronic limiter from 118 to 155 like on the RS ?