How to submit your Camaro for COTW (Camaro-of-the-Week) consideration - Page 31 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

matthew9440 · 07-16-2013, 06:04 PM

What the hay: http://www.camaro5.com/forums/showthread.php?t=307228

Monchy36 · 07-16-2013, 06:46 PM

How about now?

http://www.camaro5.com/forums/showth...=1#post6785833

BlazeTheAutobot · 07-18-2013, 03:42 AM

This is my 2010 Transformer Blaze. She is an Autobot. She is the progeny of Jetfire, She is a Hit-man for the Autobots and is only called in when the Wreckers cant handle the situation and they need a more stealthly feminine touch.

I purchased her while she was still deciding what Earth mode she wanted to take so she had not yet badged herself. After a few months of living in my garage she has grown more comfortable with me and has now taken on her final form. Below you will see the changes made and the upgrades I have done to her.

Purchased 05/11/2013:

This is what she looked like sitting on the lot:

The door sils were bent and scratched so that was the first thing I replaced. I replaced them with the Transformers Edition Sils.

The next thing I did was paint the Engine Cover

Next I Purchased The Transformers Center Caps:

Then I Got the Side Badges, but I didnt want the standard Grey/Black Ones, I wanted them in red but not the cheap plastic red ones. I was lucky to find these:

After that I wanted to do something more with the engine compartment as well as do some performance upgrades. So I purchased a Cold Air Intake and after installing it the color balance was off so I also painted the Fuse box panel to have everything look more balanced.

Next I added the Transformers Glyphs in the front and the rear.

After adding all the autobot emblems I felt the car was still not quite done, so I added the RED REFLECTIVE side gill vinyls as well as making the front and rear bow ties red.

Then I decided the ass of the car just needed something more, so using protective film black tint (not the cheap windows tint but the expensive static cling tint) I blacked out the tail lights

But i still wasnt happy and felt it needed more. So I added the Oracle Mailslot Scanner, and the Sequential Tail Light Harness.

Then I wanted to have functional lights under my hood, in case I ever broke down and needed to see under the hood on a dark creepy street, so I installed HD LED Lights under the hood.

The next thing I did was add footwell and dome LED Lighting in red.

The next thing I did was install a Alpine Amp and a custom sub box with (2) 12" Legacy Subs.

Then I added RED Led lighting to the trunk to match the interior.

Then I replaced the Standard Driving Light Bulbs with HD LED Bulbs and installed the harness so I could have my halos and driving lights on at the same time.

Next I purchased and installed CHROME strut covers.

Next I had Emblem Pros Make This For Me.

And The Final (Is it every really finsihed?) Pics are below

aquablueL99 · 07-21-2013, 08:25 PM

Quote:

Originally Posted by aquablueL99

We really could use some needed assistance with getting the "Sizzle" it's honor of COTW!!!...

She is way overdue for THIS---->

Thanks for your consideration!!!!.....

Kurt ABL99...

One more shot for the Sizzle!!!...

Kurt ABL99...

OVERPAR73 · 07-21-2013, 08:37 PM

For consideration:

2013 ZL1 CRT vert delivered (Overpar73)

Maxspeed · 07-22-2013, 08:16 AM

I would like to resubmit my car which I first submitted in post #399.

Botoasy · 07-22-2013, 09:59 PM

http://www.camaro5.com/forums/showthread.php?t=272765

Ivan @ Southwest Speed · 07-23-2013, 10:09 AM

Quote:

Originally Posted by aquablueL99

One more shot for the Sizzle!!!...

Kurt ABL99...

Thanks Kurt!

usranger80 · 07-28-2013, 08:53 PM

Kind of hard to find a unique Bumblebee these days, I think mine is though, so it is worth a shot!

http://www.camaro5.com/forums/showthread.php?t=309476

Missionboi · 07-28-2013, 11:05 PM

Here is my build!
http://www.camaro5.com/forums/showthread.php?t=286200

Monchy36 · 08-05-2013, 05:33 PM

I want to say Thanks for the honor of been selected COTW! Means a lot to me!

AdamZ · 08-06-2013, 05:42 AM

Alright lets try again...dyno vid, hood vents, zl1 grille added

http://www.camaro5.com/forums/showth...88#post5202288

menendez1293 · 08-07-2013, 01:15 PM

Here's My build:

http://www.camaro5.com/forums/showth...65#post6868965

kjkjr27 · 08-10-2013, 10:18 AM

Lets give this a try. For your consideration:

http://www.camaro5.com/forums/showthread.php?t=212792

07-16-2013, 06:04 PM	#421
matthew9440 Drives: 2010 Camaro 2SS/RS Join Date: Aug 2012 Location: DuBois, PA Posts: 1,038 View My Garage	What the hay: http://www.camaro5.com/forums/showthread.php?t=307228 __________________

07-16-2013, 06:46 PM	#422
Monchy36 ZLT!!! COTW (8/5/13) Drives: 2011 IOM 1LT RS M6 Join Date: Mar 2012 Location: Slatington, PA Posts: 4,773	How about now? http://www.camaro5.com/forums/showth...=1#post6785833 __________________ My Journal:http://www.camaro5.com/forums/showthread.php?t=213787

07-18-2013, 03:42 AM	#423
BlazeTheAutobot Drives: 2010 Camaro 2SS/RS Transformers Join Date: Jul 2013 Location: Florida Posts: 47 View My Garage	My 2010 Summit White Transformers Edition Autobot Blaze This is my 2010 Transformer Blaze. She is an Autobot. She is the progeny of Jetfire, She is a Hit-man for the Autobots and is only called in when the Wreckers cant handle the situation and they need a more stealthly feminine touch. I purchased her while she was still deciding what Earth mode she wanted to take so she had not yet badged herself. After a few months of living in my garage she has grown more comfortable with me and has now taken on her final form. Below you will see the changes made and the upgrades I have done to her. Purchased 05/11/2013: This is what she looked like sitting on the lot: The door sils were bent and scratched so that was the first thing I replaced. I replaced them with the Transformers Edition Sils. The next thing I did was paint the Engine Cover Next I Purchased The Transformers Center Caps: Then I Got the Side Badges, but I didnt want the standard Grey/Black Ones, I wanted them in red but not the cheap plastic red ones. I was lucky to find these: After that I wanted to do something more with the engine compartment as well as do some performance upgrades. So I purchased a Cold Air Intake and after installing it the color balance was off so I also painted the Fuse box panel to have everything look more balanced. Next I added the Transformers Glyphs in the front and the rear. After adding all the autobot emblems I felt the car was still not quite done, so I added the RED REFLECTIVE side gill vinyls as well as making the front and rear bow ties red. Then I decided the ass of the car just needed something more, so using protective film black tint (not the cheap windows tint but the expensive static cling tint) I blacked out the tail lights But i still wasnt happy and felt it needed more. So I added the Oracle Mailslot Scanner, and the Sequential Tail Light Harness. Then I wanted to have functional lights under my hood, in case I ever broke down and needed to see under the hood on a dark creepy street, so I installed HD LED Lights under the hood. The next thing I did was add footwell and dome LED Lighting in red. The next thing I did was install a Alpine Amp and a custom sub box with (2) 12" Legacy Subs. Then I added RED Led lighting to the trunk to match the interior. Then I replaced the Standard Driving Light Bulbs with HD LED Bulbs and installed the harness so I could have my halos and driving lights on at the same time. Next I purchased and installed CHROME strut covers. Next I had Emblem Pros Make This For Me. And The Final (Is it every really finsihed?) Pics are below Last edited by BlazeTheAutobot; 07-18-2013 at 03:56 AM.

07-21-2013, 08:37 PM	#425
OVERPAR73 2018 Garnet Red ZL1 conve Drives: 2013 & 2018 ZL1 vert Join Date: May 2009 Location: Des Moines, IA Posts: 1,471 View My Garage	For consideration: 2013 ZL1 CRT vert delivered (Overpar73) __________________ Build Thread: 2018 ZL1 Vert Purchased (Overpar73)

07-22-2013, 08:16 AM	#426
Maxspeed ~COTW 6/30/14~ Drives: 2011 Camaro SS/RS Join Date: Oct 2011 Location: Mansfield Mass Posts: 2,906 View My Garage	I would like to resubmit my car which I first submitted in post #399. __________________ Mods: Heritage Grill, Blade Spoiler, Corrado Hoodliner Mural, Premium Engine Boxes, Radiator Shroud, Custom Painted Bowties, Dipstick & Engine Caps, RX Catch Can, Corsa cat back exhaust, CAI black powder coat cold air, Apex cold air intake scoop and Apex washer tank relocate kit, Dynatech SuperMAXX Ceramic Coated LT Headers, High Flow Cats, JRE470 Rough Idle Cam Package, DSS 1,000 RWHP Axels, Slowhawk Mustang Dyno Tune, QTP QTEC 66 Low Profile Cutouts and iTSX. 453 RWHP 427 RWTQ WEB LINKS BUILD TIMING CHAIN FAILURE TRANSITION FROM STOCK TO CAM VID

07-22-2013, 09:59 PM	#427
Botoasy Drives: 2015 RRM 1LE Join Date: Dec 2011 Location: Blackwood, New Jersey Posts: 446 View My Garage	http://www.camaro5.com/forums/showthread.php?t=272765 __________________ 2015 Camaro 1LE: CAI, LT Headerrs, Cam 2010 Camaro LS: BBK Longtube Headers with Hi Flow Cats, BBK CAI, SLP Loudmouth 1 exhaust, Magnaflow X-pipe and Resonators, Ported TB, Mace Ported IM and Spacer,Trifecta Tune, Elite Catch Can, Hotchkis front and rear sway bars. SOLD!!! My Build Thread: http://www.camaro5.com/forums/showthread.php?t=27276 5

07-28-2013, 08:53 PM	#429
usranger80 Drives: 2011 1LT "Bumblebee" Join Date: Jun 2011 Location: San Angelo, TX Posts: 699 View My Garage	Kind of hard to find a unique Bumblebee these days, I think mine is though, so it is worth a shot! http://www.camaro5.com/forums/showthread.php?t=309476 __________________

07-28-2013, 11:05 PM	#430
Missionboi SoCal HT5 [COTW: 8/12/13] Drives: 2013 2SS 1LE RS Join Date: Mar 2010 Location: Santa Clarita Posts: 1,254	Here is my build! http://www.camaro5.com/forums/showthread.php?t=286200

08-05-2013, 05:33 PM	#431
Monchy36 ZLT!!! COTW (8/5/13) Drives: 2011 IOM 1LT RS M6 Join Date: Mar 2012 Location: Slatington, PA Posts: 4,773	I want to say Thanks for the honor of been selected COTW! Means a lot to me! __________________ My Journal:http://www.camaro5.com/forums/showthread.php?t=213787

08-06-2013, 05:42 AM	#432
AdamZ Account Suspended Drives: Eve - 2011 Camaro 2SS/RS Join Date: Apr 2012 Location: Fairfield, OH Posts: 11,815	Alright lets try again...dyno vid, hood vents, zl1 grille added http://www.camaro5.com/forums/showth...88#post5202288

08-07-2013, 01:15 PM	#433
menendez1293 Emerald Coast Camaros Drives: 2010 Camaro 2LT/RS M6 Join Date: Nov 2009 Location: Tallahassee FL Posts: 9,687 View My Garage	Here's My build: http://www.camaro5.com/forums/showth...65#post6868965

08-10-2013, 10:18 AM	#434
kjkjr27 COTW 9/16/13 Drives: 2011 2LT/RS Camaro IOM Join Date: Jan 2012 Location: Syracuse Posts: 10,089	Lets give this a try. For your consideration: http://www.camaro5.com/forums/showthread.php?t=212792 __________________ Twitch Youtube

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
5th Gen Suspension -- The Book	JusticePete	Suspension / Brakes / Chassis	151	05-07-2015 05:52 PM
Installation Camaro Needed for Manual for a Justice Install Package in SF Bay Area	Info@PeddersUSA.com	USA - California	6	04-30-2010 08:02 PM
Official Camaro Convertible CONCEPT Press Release	Tran	Camaro Convertible Forum	12	11-18-2009 07:05 PM
Ambient lighting (ABL) - the FINAL update = LIMITED TO DOOR PANELS	CamaroScotty	5th Gen Camaro SS LS LT General Discussions	338	04-15-2009 05:33 PM
Answeres to questions I have stumbled on	dieseldave24v	5th Gen Camaro SS LS LT General Discussions	13	02-23-2009 06:56 PM