09-01-2009, 01:23 PM | #1 |
Drives: 2010 CAMARO SS Join Date: Aug 2009
Location: AUGUSTA, GA
Posts: 235
|
MGW PROTOTYPE SHIFTER IS IN!!! STAY TUNED!!!
hey guys,
just letting you know its in and working great...gonna tweak in for a few weeks and then start making production pieces.... here is a teaser pic of our shifter installed and yes its hidden lol... sorry guys not just yet... but you can see the race knob we made for it like the one we do for the corvette ...it feels MUCH better than the stock knob.... as far as installation goes... i DID remove the tranny brace and lowered the tranny just as far as it would go because you really need to in order to get to those goofy pivot lock pins...they are just like the gt500 cobra has...once you get to them you can remove the whole shifter. now for the good part...our shifter DOES NOT use the factory shifter body . it is a complete shifter assembly .you will completely remove the stock piece. and ours has return springs built into it and feels like a tank... here are some videos of the car running thru the gears car is bone stock hence how slow and quiet lol more info to come soon Videos: Attached Images regards george |
09-01-2009, 01:42 PM | #2 |
I.AM.
Drives: 2011 2SS/RS/A6 cammed-n-whippled Join Date: Oct 2008
Location: NY
Posts: 2,638
|
NICE...looking forward to it. Can you tell us any install details...like will we have to drop the trans at all to install the shifter?
thanks.
__________________
NY5thgen.com
|
09-01-2009, 02:12 PM | #3 |
Okie doke
|
Can't wait .. please keep us all posted !
Crowley
__________________
|
09-01-2009, 02:38 PM | #4 |
Drives: 92 Skyline GTR, 89 240SX Join Date: Aug 2009
Location: QT PA
Posts: 64
|
I didn't know authorization was needed? I just saw a thread that said specifically that it was not needed. If this is wrong please let me know before I get in trouble with the powers that be, and also give me the contact info you have so I can do things by the book.
Thanks, Erik |
09-01-2009, 02:39 PM | #5 | |
Drives: 92 Skyline GTR, 89 240SX Join Date: Aug 2009
Location: QT PA
Posts: 64
|
Quote:
Almost had the chance to open for them a few years back, that would have been great. |
|
09-01-2009, 03:25 PM | #6 |
Drives: 2010 CAMARO SS Join Date: Aug 2009
Location: AUGUSTA, GA
Posts: 235
|
here is a teaser pic of our shifter installed and yes its hidden lol... sorry guys not just yet... but you can see the race knob we made for it like the one we do for the corvette ...it feels MUCH better than the stock knob....
i just talked to tran and you are right about vendors...we do not have to have permission just yet i just wanted to make sure...he will be setting up vendors soon. as far as installation goes... i DID remove the tranny brace and lowered the tranny just as far as it would go because you really need to in order to get to those goofy pivot lock pins...they are just like the gt500 cobra has...once you get to them you can remove the whole shifter. now for the good part...our shifter DOES NOT use the factory shifter body . it is a complete shifter assembly .you will completely remove the stock piece. and ours has return springs built into it and feels like a tank... here are some videos of the car running thru the gears car is bone stock hence how slow and quiet lol more info to come soon george |
09-01-2009, 03:41 PM | #7 |
I.AM.
Drives: 2011 2SS/RS/A6 cammed-n-whippled Join Date: Oct 2008
Location: NY
Posts: 2,638
|
great band
__________________
NY5thgen.com
|
09-01-2009, 03:44 PM | #8 |
Faith Keeper
Drives: 2012 Silverado LTZ, 2010 2SS/RS Join Date: Nov 2008
Location: Saskatoon, Saskatchewan Canada
Posts: 2,764
|
Man, those vids are pretty good! Looks like a solid piece!!
|
09-02-2009, 11:43 PM | #9 |
NOICE!!!
|
Looking Good
__________________
|
09-03-2009, 08:40 AM | #10 |
Account Suspended
Drives: 2010 Chevy Camaro 2SS/RS Join Date: Dec 2008
Location: New Orleans
Posts: 769
|
is the shifter set lower in the boot? I don't like how high the stock shifter is.
|
09-03-2009, 08:43 AM | #11 |
Whipped
|
I don't care for the knob.. . Will the stock knob fit back on?
__________________
|
09-03-2009, 12:28 PM | #12 |
Drives: 2010 CAMARO SS Join Date: Aug 2009
Location: AUGUSTA, GA
Posts: 235
|
the shifter will be height adjustable so you can set the knob height to your liking...
and we will be offering 2-3 knob design optionsd as well as a setup for your stock knob !! george |
09-03-2009, 12:31 PM | #13 |
Account Suspended
Drives: 2010 Chevy Camaro 2SS/RS Join Date: Dec 2008
Location: New Orleans
Posts: 769
|
any price yet?
|
09-03-2009, 12:34 PM | #14 |
Drives: 2010 CAMARO SS Join Date: Aug 2009
Location: AUGUSTA, GA
Posts: 235
|
no idea yet but i will have a good idea in about a week.
i cant imagine it going over 300 dollars though!!! regards george |
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
MTI Racings new 2010 Camaro short shifter | MTI Racing | V8 and V6 Transmissions / Driveline (6L80 / 6L50 / TR6060 / AY6) | 24 | 08-23-2009 08:07 PM |
Pinged MGW about the MGW shifter progress for the Camaro | Crowley | V8 and V6 Transmissions / Driveline (6L80 / 6L50 / TR6060 / AY6) | 2 | 07-31-2009 08:21 PM |
The BEST upgrade for your new Camaro - Camaro Six Shooter shifter | MTI Racing | V8 and V6 Transmissions / Driveline (6L80 / 6L50 / TR6060 / AY6) | 19 | 07-23-2009 02:52 PM |
STAY TUNED - The "TWINS" "GO HOME" Saturday! | CamaroScotty | 5th Gen Camaro SS LS LT General Discussions | 9 | 06-20-2009 09:40 AM |
future dealer ... stay tuned | The_Blur | USA - Great Lakes | 4 | 09-04-2008 11:17 PM |