10-30-2010, 02:45 AM | #1 |
Drives: Camaro Join Date: Apr 2009
Location: California
Posts: 400
|
Severe paint restoration of a Mitsubishi Evo
When I was contacted by the owner of this car, I knew it was gonna need some work. However when I saw the state it was in, I realized it was gonna need a lot more. After discussing options for reviving the paint on this Evo, the customer decided to only do the exterior, even though the inside needed attention and you could barely see through the windows... So I got to work...
Here's what I arrived to... You can see the clear has completely failed on the rear brakes. I guess there is a recall for this but it hasn't been done yet. Another factory defect here, the clear was completely shot to oblivion on the carbon fiber spoiler. Spoiler is headed to the paint shop to get redone. P21S Wheel Gel dwelling on the severely neglected wheels Pre washing soak with the foam gun A couple of 50/50 shots *time lapse* MUCH MUCH later.... this is the result The restored wheels with the finish now sealed for protection Hope you enjoyed!
__________________
Jeff
2008 Z06 - Heads/cam/intake/exhaust/tune 2005 Sierra STL ext cab -5.3L, Daily/Detail Rig |
10-30-2010, 10:32 AM | #2 |
Blowin the doors off!
Drives: A 2013 SS RS 6M SR Join Date: Apr 2010
Location: Phoenix, AZ
Posts: 2,390
|
VERY nice!
__________________
2G1FS1EWXD9163847 |
10-30-2010, 11:19 AM | #3 |
Just Because!
Drives: 2010 SIM 2SSRS Join Date: Jun 2010
Location: San Jose, Ca
Posts: 6,909
|
Good god, did they leave that car out in the desert for a few years??!
Great job! Saved that guy some serious $$ on a new paint job! |
10-30-2010, 11:29 AM | #4 |
Drives: 2010 2SS/RS,M6,Black w/CGM Stripes Join Date: Jan 2010
Location: Nashville, NC
Posts: 1,778
|
No idea how you did that but it looks great. The owner should be shot to ruin such a great vehicle.
Sent from my DROIDX using Tapatalk
__________________
3" RDP Motorsports aggressive cat-back exhaust w/ x-pipe, Vararam CAI, Hurst's short throw shifter, Gary's Customs painted bowties, Ofer's HID DRL/Fog Light wiring harness, Kelvin 8K HID DRL bulbs, ZL1 grille. Johnson's window tint film, LSR lowering springs, Metra dash kit with Pioneer In-Dash DVD head unit. |
10-30-2010, 01:29 PM | #5 |
Amazing. Great work.
__________________
Black cars are not hobbies, they are an obsession |
|
10-30-2010, 07:35 PM | #6 |
Drives: 2011 camaro ls Join Date: Jul 2010
Location: lafayette, la
Posts: 219
|
GREAT JOB; IT'S HARD TO BELEIVE THAT IT'S THE SAME CAR.
|
10-30-2010, 08:09 PM | #7 |
NorCal Camaro➎ Member
|
Looks good
A gallon of 105 later....
__________________
|
10-30-2010, 08:48 PM | #8 |
Drives: 2LT/RS Join Date: Jul 2009
Location: San Antonio
Posts: 844
|
its looks amazing what did u use to restore the wheels so much?
|
10-30-2010, 09:29 PM | #9 |
Drives: Crane Truck Join Date: Aug 2010
Location: San Diego CA
Posts: 340
|
great work!
you have talent and patience... can i ask what he was charged?
__________________
1998 Z28 M6 SOLD :(
315rwhp (3500lbs) 1999 HUGGER SS SOLD :( 400rwhp (3375lbs) 2002 YELLOW Z06 SOLD :( 360rwhp (3040lbs) 2013 CAMARO ZL1 COMMING SOON |
10-30-2010, 09:51 PM | #10 |
Drives: Rally Yellow 2SS 2010 Join Date: Mar 2009
Location: Star, Mississippi
Posts: 377
|
One hell of a job!
__________________
|
10-30-2010, 10:54 PM | #11 |
Don't Like it? Suggit.
|
You are the best man! One helluva transformation!
__________________
"Tops off, tach up baby- loud and proud!" A Camaro lover from day one- 1996 3.8 V6 Camaro, to 1996 5.7 LT1 Camaro Z28, to the sold 2002 5.7 LS1 Camaro SS, and NOW, a [I]6.2 L99 VR 2SS/RS: XS Power stainless full exhaust, Airaid CAI, BMR drop springs and sways, custom tune by Cal Speed- 411rwhp |
10-31-2010, 01:51 PM | #12 |
"Detailing Devil Dog"
Drives: 2001 Corvette Coupe Join Date: Jan 2010
Location: Louisville, KY
Posts: 2,730
|
Outstanding results! I'm surprised that the clear had not started peeling off the car like it did on the spoiler.
__________________
"Marines - Making the other guy die for his country for over 200 years."
|
11-01-2010, 01:28 AM | #13 | |
Drives: Camaro Join Date: Apr 2009
Location: California
Posts: 400
|
Thanks guys!!
It was 205 actually. The paint was very soft, so 205 did amazing work, but it had to be further refined because it was soft and tricky to finish down with a uniform gloss. Quote:
Thanks! The spoiler was the only part of the car that had clear. The rest of the car is single stage paint.
__________________
Jeff
2008 Z06 - Heads/cam/intake/exhaust/tune 2005 Sierra STL ext cab -5.3L, Daily/Detail Rig |
|
11-01-2010, 03:28 AM | #14 |
"Detailing Devil Dog"
Drives: 2001 Corvette Coupe Join Date: Jan 2010
Location: Louisville, KY
Posts: 2,730
|
Now that makes sense. You obviously ruined some pads on that job! That looks like way more work than I would want to do. You da' man!
__________________
"Marines - Making the other guy die for his country for over 200 years."
|
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Washing/Detailing for Newbies | MRK III Z28 | Cosmetic Maintenance: Washing, Waxing, Detailing, Bodywork, Protection | 125 | 02-05-2024 09:55 PM |
Way to fix you rims if you curb your wheels | DarkDragonAn | Wheels and Tires Talk Sponsored by The Tire Rack | 25 | 08-21-2016 11:11 AM |
Got my Zaino today | lordfriday2 | Cosmetic Maintenance: Washing, Waxing, Detailing, Bodywork, Protection | 261 | 05-31-2014 10:00 PM |
Paint your own stripes? | blackZbandit | Cosmetics and Lighting Modification Discussions | 44 | 09-18-2011 09:22 AM |