PAUL SS'S ABM - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

PAUL SS · 11-22-2011, 08:18 PM

2010 1SS w/ RS, LS3, Aqua Blue Metallic, Gray Interior, Polished Wheels and Boston Accoustics 9 Speaker 245 Watt Audio.

Order NJRMGD, April 21, 2009. Delivered August 12, 2009

A list of all the current mods:

Apex Skip Shift Eliminator - removed, CAGS tuned out
Engine Cover Delete
White Hood Spears with Red Accent Stripes
Heritage Grille
Blue Tint on Headlights. Parking Lights DRL and Reverse lights
2012 Camaro Heater Hoses by GM
Rotated Fuel Rails with Corvette Fuel Line
Intake Manifold cover Delete
Red Powdered Coated Coil Brackets
SS Button Head Machine Screws replacing hex head bolts
LSR Billet Strut Retaining Washers
Elite Engineering Catch Can with Braided Hoses and AN Fittings
Cold Air Inductions Cold Air Intake
Hurst Billet 2 Shifter
Sparks Performance Billet SS replaces rear bowtie
Custom Cold Air Scoop
Washer Bottle Delete
Separate Clutch Fluid Reservoir
Window Tint 15%
Pinstripes by Larry Hook
Dyno Max Axle back Exhaust

Metco Billet Tensioner Pulley.
Lokar Dipstick and Tube.
Upgraded Hurst shifter bushings.
BMR front and rear 1 inch lowering springs.
BMR front and rear adjustable sway bars and bushings.
BMR front and rear sway bar end links.
BMR rear sway bar end link reinforcement.
BMR steering rack bushing.
Clear Image headers.
Stage 8 locking header bolts.
Jet Hot 1300 silver ceramic header coating.
Clear Image High Flow Cats and o2 Extensions.
SS badge from stock grille attached to heritage grille.
Polished factory valve covers.
Polished factory thermostat housing
JRE 4 wheel alignment.
JRE SCT tune.

Very first mod was the license plate. Ordered it before my order went to 2000.

Then Came the Skip Shift Eliminator from Apex Motorsports. Removed, CAGS tuned out.

Next, some minor engine bay changes.

Factory fresh

New Era Intake Pipe Kit looks better than the stock one.

Then I got tired of the engine cover,so it had to go.

The Bow Ties got some blue vynil.

Then a Bow Tie Delete.

And another change

Hood Spears

Time for some auto crossing

The graphics were only on for one day

Still looking for something better on the front, so it was time for a...

Heritage grille, I need to get an "SS" on there. But that wasn't all

There was also tint added to the lights from Rvinyl.

PAUL SS · 12-03-2011, 08:44 AM

Hood spears get accents

1/8 pin stripes on top and 1/4 pinstripes along the bottom edde.

PAUL SS · 12-03-2011, 08:49 AM

Time for an under hood cleanup.

So I took this all apart

Swapped this out...

for this, and

this for

this, and...

got rid of the intake manifold cover

and flipped the fuel rails 180 degrees.

Took my coil brackets and...

...had them powder coated red.

Now my engine bay looks like this.

AngelSpeedFreak · 12-03-2011, 08:59 AM

engine bay is starting to look like a real muscle car now

I dig it...

RED DEMON SS · 12-03-2011, 07:54 PM

Good job in the Engine Bay, i will keep checking back for more updates!

aquablueL99 · 12-04-2011, 07:32 AM

Paul SS..Nice work. Glad to see your thread! I love the spears and especially after the pinstriping! Love the color...ABM--That's the one...keep up the good work...

Sterling · 12-04-2011, 07:37 AM

Looks like you did a few things I didn't already know about...

PAUL SS · 12-04-2011, 02:48 PM

Quote:

Originally Posted by AngelSpeedFreak

engine bay is starting to look like a real muscle car now

I dig it...

Thanks. IMO much better than the engine cover.

Quote:

Originally Posted by farthestnorth

Good job in the Engine Bay, i will keep checking back for more updates!

Thanks. There will be a few more changes after the first of the year

Quote:

Originally Posted by aquablueL99

Paul SS..Nice work. Glad to see your thread! I love the spears and especially after the pinstriping! Love the color...ABM--That's the one...keep up the good work...

Thanks, I appreciate that.

Quote:

Originally Posted by Sterling

Looks like you did a few things I didn't already know about...

Just trying to keep up with you Chuck.

PAUL SS · 12-04-2011, 02:53 PM

In keeping with a developing theme of red, white, blue, black and gray/silver/chrome I also brought the rear bow tie up to date.

Maybe someday a nice "SS" will replace the bowtie, but this is it for now.

Next, a better camera.

AngelSpeedFreak · 12-04-2011, 03:01 PM

that bowtie looks really good...

aquablueL99 · 12-04-2011, 04:04 PM

Quote:

Originally Posted by PAUL SS

In keeping with a developing theme of red, white, blue, black and gray/silver/chrome I also brought the rear bow tie up to date.

Maybe someday a nice "SS" will replace the bowtie, but this is it for now.

Next, a better camera.

I LIKE the bowtie....looks great on the ABM. Keep the pictures coming..

2010 SSRS · 12-04-2011, 04:14 PM

Hey Paul, I want to see a Supercharger in your next pic, get on that

PAUL SS · 12-04-2011, 05:49 PM

Quote:

Originally Posted by 2010 SSRS

Hey Paul, I want to see a Supercharger in your next pic, get on that

.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.

2010 SSRS · 12-05-2011, 01:11 PM

Quote:

Originally Posted by PAUL SS

.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.

I want to see that under your hood at Papa Johns next Summer

11-22-2011, 08:18 PM	#1
PAUL SS The Mark of Excellence Drives: 2010 ABM 1SS RS LS3 Join Date: Jan 2009 Location: Smallest State in the Union Posts: 8,690 View My Garage	PAUL SS's ABM Journal 2010 1SS w/ RS, LS3, Aqua Blue Metallic, Gray Interior, Polished Wheels and Boston Accoustics 9 Speaker 245 Watt Audio. Order NJRMGD, April 21, 2009. Delivered August 12, 2009 A list of all the current mods: Apex Skip Shift Eliminator - removed, CAGS tuned out Engine Cover Delete White Hood Spears with Red Accent Stripes Heritage Grille Blue Tint on Headlights. Parking Lights DRL and Reverse lights 2012 Camaro Heater Hoses by GM Rotated Fuel Rails with Corvette Fuel Line Intake Manifold cover Delete Red Powdered Coated Coil Brackets SS Button Head Machine Screws replacing hex head bolts LSR Billet Strut Retaining Washers Elite Engineering Catch Can with Braided Hoses and AN Fittings Cold Air Inductions Cold Air Intake Hurst Billet 2 Shifter Sparks Performance Billet SS replaces rear bowtie Custom Cold Air Scoop Washer Bottle Delete Separate Clutch Fluid Reservoir Window Tint 15% Pinstripes by Larry Hook Dyno Max Axle back Exhaust Metco Billet Tensioner Pulley. Lokar Dipstick and Tube. Upgraded Hurst shifter bushings. BMR front and rear 1 inch lowering springs. BMR front and rear adjustable sway bars and bushings. BMR front and rear sway bar end links. BMR rear sway bar end link reinforcement. BMR steering rack bushing. Clear Image headers. Stage 8 locking header bolts. Jet Hot 1300 silver ceramic header coating. Clear Image High Flow Cats and o2 Extensions. SS badge from stock grille attached to heritage grille. Polished factory valve covers. Polished factory thermostat housing JRE 4 wheel alignment. JRE SCT tune. Very first mod was the license plate. Ordered it before my order went to 2000. Then Came the Skip Shift Eliminator from Apex Motorsports. Removed, CAGS tuned out. Next, some minor engine bay changes. Factory fresh New Era Intake Pipe Kit looks better than the stock one. Then I got tired of the engine cover,so it had to go. The Bow Ties got some blue vynil. Then a Bow Tie Delete. And another change Hood Spears Time for some auto crossing The graphics were only on for one day Still looking for something better on the front, so it was time for a... Heritage grille, I need to get an "SS" on there. But that wasn't all There was also tint added to the lights from Rvinyl. __________________ BMR, CAI, DynoMax, Elite Eng., Hurst, Jannetty, Clear Image Headers & Hi Flow cats, Jet Hot, LSR, TSW, VMax, Vredestein Last edited by PAUL SS; 03-19-2015 at 07:46 AM.

12-03-2011, 08:44 AM	#2
PAUL SS The Mark of Excellence Drives: 2010 ABM 1SS RS LS3 Join Date: Jan 2009 Location: Smallest State in the Union Posts: 8,690 View My Garage	Hood spears get accents 1/8 pin stripes on top and 1/4 pinstripes along the bottom edde. __________________ BMR, CAI, DynoMax, Elite Eng., Hurst, Jannetty, Clear Image Headers & Hi Flow cats, Jet Hot, LSR, TSW, VMax, Vredestein Last edited by PAUL SS; 12-03-2011 at 11:50 AM.

12-03-2011, 08:49 AM	#3
PAUL SS The Mark of Excellence Drives: 2010 ABM 1SS RS LS3 Join Date: Jan 2009 Location: Smallest State in the Union Posts: 8,690 View My Garage	Time for an under hood cleanup. So I took this all apart Swapped this out... for this, and this for this, and... got rid of the intake manifold cover and flipped the fuel rails 180 degrees. Took my coil brackets and... ...had them powder coated red. Now my engine bay looks like this. __________________ BMR, CAI, DynoMax, Elite Eng., Hurst, Jannetty, Clear Image Headers & Hi Flow cats, Jet Hot, LSR, TSW, VMax, Vredestein Last edited by PAUL SS; 12-03-2011 at 11:56 AM.

12-03-2011, 08:59 AM	#4
AngelSpeedFreak Most hated in NM.... Drives: Sold the 6POINT2, went to a 50THZ06 Join Date: Sep 2011 Location: New Mexico Posts: 2,904	engine bay is starting to look like a real muscle car now I dig it... __________________

12-03-2011, 07:54 PM	#5
RED DEMON SS OFF THE CHAIN Drives: PSHHH UWISH Join Date: Sep 2011 Location: This Side Of Hell Posts: 8,406 View My Garage	Good job in the Engine Bay, i will keep checking back for more updates! __________________

12-04-2011, 07:32 AM	#6
aquablueL99 Jackson's COTW Drives: 1968 Camaro & 2010 Camaro 2SS Join Date: Jul 2009 Location: Chalmers, Indiana Posts: 1,740 View My Garage	Nice personal touch Paul SS..Nice work. Glad to see your thread! I love the spears and especially after the pinstriping! Love the color...ABM--That's the one...keep up the good work... __________________ Tru Blu Beauty http://www.camaro5.com/forums/showthread.php?t=183914

12-04-2011, 07:37 AM	#7
Sterling Drives: 2010 Camaro 1LT/RS M6 Join Date: Nov 2007 Location: Fairhaven, MA Posts: 5,885 View My Garage	Looks like you did a few things I didn't already know about... __________________ Trifecta tune, Vararam Intake, VMAX throttle body and manifold insulator, RxPerformance Catch Can, , MRT v1.0 and Louvers, Barton shifter, BMR strut tower brace, RED dome light and Plasma LED DRL's, fieldgoal00's Halo 1 harness, hood spears/side stripes, rain guards, custom bowtie, Team LLT badges, headlight and foglight covers, taillight and side marker covers, backup light covers, WeatherTech floormats

12-04-2011, 02:53 PM	#9
PAUL SS The Mark of Excellence Drives: 2010 ABM 1SS RS LS3 Join Date: Jan 2009 Location: Smallest State in the Union Posts: 8,690 View My Garage	In keeping with a developing theme of red, white, blue, black and gray/silver/chrome I also brought the rear bow tie up to date. Maybe someday a nice "SS" will replace the bowtie, but this is it for now. Next, a better camera. __________________ BMR, CAI, DynoMax, Elite Eng., Hurst, Jannetty, Clear Image Headers & Hi Flow cats, Jet Hot, LSR, TSW, VMax, Vredestein

12-04-2011, 03:01 PM	#10
AngelSpeedFreak Most hated in NM.... Drives: Sold the 6POINT2, went to a 50THZ06 Join Date: Sep 2011 Location: New Mexico Posts: 2,904	that bowtie looks really good... __________________

12-04-2011, 04:14 PM	#12
2010 SSRS Drives: 3 V8 Camaros Join Date: May 2009 Location: The Ocean State Posts: 111,187 View My Garage	Hey Paul, I want to see a Supercharger in your next pic, get on that __________________ Jannetty Racing JRE Street Package

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
PHOTOSHOP HELP!!! ABM with special rally's	TAG UR IT	Camaro Photoshops / Renderings Forum	6	11-15-2009 07:50 PM
ABM I don't get it	Bo Yo	5th Gen Camaro SS LS LT General Discussions	45	10-28-2009 12:55 PM
ABM Ordering	mjlash22	Camaro Price \| Ordering \| Tracking \| Dealers Discussions	18	10-27-2009 09:01 AM
ABM not getting canceled in Canada?	iyam_lorne	5th Gen Camaro SS LS LT General Discussions	22	10-25-2009 05:57 PM