06-04-2013, 08:49 PM | #1 |
Drives: 2011 2SS Synergy Green Join Date: Nov 2011
Location: Austin, Texas
Posts: 3,670
|
Any of you guys seen these rock guards?
I bought a pair from the dude on Ebay and just got them in. I have to admit, they are friggin' sweet and install was seriously a breeze.
You can 3M tape the tops or use the supplied clips to hold the tops in place. I opted for the clips and they hold well. Anyway. They are working well and will hopefully keep debris of the quarters! Here is the page where I bought them! http://www.ebay.com/itm/2010-2013-CA...dc1f84&vxp=mtr
__________________
L99 With a Maggie
|
06-04-2013, 10:51 PM | #2 |
Drives: SS 1LE Join Date: Nov 2012
Location: Texas
Posts: 1,829
|
I have seen these for sale on here by a forum member.
|
06-04-2013, 11:01 PM | #3 |
Drives: 13 ZL1 SIM, 99 Z28 Black Join Date: Feb 2013
Location: Spokane, WA
Posts: 708
|
There is another thread on these. Seems everyone likes them. Oneslow is on the site.
__________________
2018 C7 Z06 - WGG, M7. / 2013 ZL1 - SIM, 6 spd, RotoFab CAI, Can. / 1999 Z28 - Black, 6 spd, K&N, Subframe. / More Fun Stuff - www.inlandspeed.com
|
06-07-2013, 07:11 AM | #4 |
Account Suspended
Drives: 2012 Camaro ZL1 #1265 Join Date: Jan 2009
Location: McHenry, IL
Posts: 595
|
The only complaint I have heard so far is the inside edge that no one sees is not 100% laser cut straight. I guess that's what you get making every one by hand. Other than that everyone loves them.
|
06-07-2013, 12:06 PM | #5 |
Account Suspended
|
I made similar ones myself but cant figure out how to stop getting rocks caught between the rock guard and fender. Anyone else having this problem?
|
06-07-2013, 12:17 PM | #6 |
Drives: 2012 Camaro ZL1 SIM CTF Car M6 Join Date: Jan 2010
Location: Taylor, MI
Posts: 883
|
I have them installed and they are great!
__________________
2012 ZL1,CTF Car, SIM MN6, Polished Wheels,The Rare Flat Black Insert. Proud member of the unofficial Camaro5 "Rodgers Chevrolet Fan Club" |
06-07-2013, 07:48 PM | #7 | |
Account Suspended
Drives: 2012 Camaro ZL1 #1265 Join Date: Jan 2009
Location: McHenry, IL
Posts: 595
|
Quote:
Glad you like them Bob Thanks again!!! |
|
06-10-2013, 07:15 AM | #8 |
Account Suspended
Drives: 2012 Camaro ZL1 #1265 Join Date: Jan 2009
Location: McHenry, IL
Posts: 595
|
|
06-10-2013, 10:16 AM | #9 |
Drives: 2013 Camaro ZL1 VR/ECF/Sunroof-Trad Join Date: Apr 2011
Location: Rochester, NY
Posts: 134
|
Got mine last Friday. Have not installed yet as I am filling any small rock chips in the paint for the mounting area. I rough fitted one of them to see how they would look and I like them. I am going to work on filling more of the small chips tonight and let that dry and then install the guards tomorrow night hopefully. I am excited to get them on to protect the paint. Will add more thoughts once installed.
__________________
Traded:
2013 Camaro ZL1 Victory Red, Exposed Carbon Fiber, Sunroof Traded: 2011 Camaro 2SS IOM, RS, Polished Rims, Sunroof, Black Stripes, Hurst Shifter Mods: Borla ATAK Cat-Back, CAI Intake, Skip Shift Elim, Tint |
06-10-2013, 10:30 AM | #10 |
Retired from Car mfrs....
Drives: 2LT RS/HR-V Join Date: May 2013
Location: /Fort Lauderdale
Posts: 10,048
|
any pics?
these look a lot nicer than the GM big clunky splashgards...correct? |
06-10-2013, 10:48 AM | #11 |
Drives: 2013 Camaro ZL1 VR/ECF/Sunroof-Trad Join Date: Apr 2011
Location: Rochester, NY
Posts: 134
|
I have no pics. Oneslow can send you some im sure. These look much better than the huge GM ones. For the ZL1 they look more like a stock rock guard that is on the front of the front tire wheel wells. That was an important factor when I thought about my purchase, I did not want ones that stick far out or looked non stock. These were the closest I could find for a good price.
Here are some pictures in the ebay posting that you can check out: http://www.ebay.com/itm/2010-2013-CA...dc1f84&vxp=mtr
__________________
Traded:
2013 Camaro ZL1 Victory Red, Exposed Carbon Fiber, Sunroof Traded: 2011 Camaro 2SS IOM, RS, Polished Rims, Sunroof, Black Stripes, Hurst Shifter Mods: Borla ATAK Cat-Back, CAI Intake, Skip Shift Elim, Tint Last edited by spen5151; 06-10-2013 at 10:56 AM. Reason: Add Info |
06-10-2013, 11:27 AM | #12 |
Drives: 13 ZL1 1091, 04 Ram 2500, 12 CX9 Join Date: Jul 2012
Location: Lancaster, PA
Posts: 559
|
Mine took about 2 minutes to clean the inside edges. To save the money from the price of the other ones out there. I would easily spend that amount of time every day. Great bang for the buck. Mine have at least 400 miles and are holding up great with the 3m tape, which I was able to find at Wal-Mart. Never needed to use the clips.
|
06-10-2013, 11:55 AM | #13 |
Drives: 2012 Camaro ZL1 SIM CTF Car M6 Join Date: Jan 2010
Location: Taylor, MI
Posts: 883
|
3M tape works great
__________________
2012 ZL1,CTF Car, SIM MN6, Polished Wheels,The Rare Flat Black Insert. Proud member of the unofficial Camaro5 "Rodgers Chevrolet Fan Club" |
06-10-2013, 12:52 PM | #14 |
Drives: 13 ZL1 SIM, 99 Z28 Black Join Date: Feb 2013
Location: Spokane, WA
Posts: 708
|
Seems the tape doesn't stick well to the plastic. How do you guys get it to stick? Probably warm temp helps a lot?
__________________
2018 C7 Z06 - WGG, M7. / 2013 ZL1 - SIM, 6 spd, RotoFab CAI, Can. / 1999 Z28 - Black, 6 spd, K&N, Subframe. / More Fun Stuff - www.inlandspeed.com
|
|
|
|
|