Skuttducks "Cliffy" RJT 2LT - Page 7 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

skuttduck · 04-25-2013, 09:28 AM

Quote:

Originally Posted by kold

it looks awesome!!!!

Thanks. It seems to be holding up real well.

skuttduck · 05-03-2013, 08:15 AM

So adding the frameless mirror, I decided to upgrade to the 2012 Dash, install hud, and add the ZL1 Suede insert. I really like the red stitching to go with the interior.

This was an epic project.

Took me and my friend Craig quite a few hours 10 - 12 hours. I also had some help in the beginning from Efpardo.

So to do the HUD install and go to the 2012 dash you need to first remove any extras such as my ambient light, footwell lights, and my radar detector. I also had to reroute the wires for my 2013 frameless mirror as they were preventing the center console from being removed.

The first photo I took was getting the steering wheel removed.

The steering wheel controls and radio in the trunk.

My 2010 dash pad in the family room.

The dash removed!

skuttduck · 05-03-2013, 08:29 AM

Once I got the dash out, I had to install the HUD into the 2012 dash, install the center duct, as well as move over the duct trim speaker and such.

Install the HUD, install the ambient light.
Take note of the screws removed behind the gauges.

Notice the screws removed from behind the radio

This is the last of the 2010 dash. I had to move the airbag, and the duct to the new dash.

skuttduck · 05-03-2013, 08:33 AM

I didn't have the right center duct, so I had to drive the Camaro around like this for a few days.

Here it is a photo of the Heads up display!

Once I figured out that to install the center duct it has to screw into the trim piece, I called up Rodgers Chevrolet, and got ahold of Maureen, she hooked me up with the missing part trim, and center duct, and had it to me next day! Keep in mind I am only about 1.5 hours away, but again thanks Maureen!

Cliffy looks stock again.

skuttduck · 07-08-2013, 02:47 PM

Latest mod is the red stitching on the shift knob and boot.

Now to figure out a way to get that on the steering wheel and arm rests.

Aubrey64 · 07-09-2013, 11:56 PM

Build looks great!! I did the same thing when I did the HUD install, I switched it out with a 2012 dash. It looks so much better IMO, and its definitely worth the install. Awesome job so far!

sasha055 · 01-09-2014, 06:27 PM

I love how you colored the seats!
Where did you get the paint from?

Sasha

05-03-2013, 08:15 AM	#86
skuttduck Drives: 2010 RJT 2LT Camaro Join Date: May 2009 Location: East Lansing, MI Posts: 2,530	So adding the frameless mirror, I decided to upgrade to the 2012 Dash, install hud, and add the ZL1 Suede insert. I really like the red stitching to go with the interior. This was an epic project. Took me and my friend Craig quite a few hours 10 - 12 hours. I also had some help in the beginning from Efpardo. So to do the HUD install and go to the 2012 dash you need to first remove any extras such as my ambient light, footwell lights, and my radar detector. I also had to reroute the wires for my 2013 frameless mirror as they were preventing the center console from being removed. The first photo I took was getting the steering wheel removed. The steering wheel controls and radio in the trunk. My 2010 dash pad in the family room. The dash removed! __________________ Check out my Camaro http://www.camaro5.com/forums/showthread.php?t=84133

05-03-2013, 08:29 AM	#87
skuttduck Drives: 2010 RJT 2LT Camaro Join Date: May 2009 Location: East Lansing, MI Posts: 2,530	Once I got the dash out, I had to install the HUD into the 2012 dash, install the center duct, as well as move over the duct trim speaker and such. Install the HUD, install the ambient light. Take note of the screws removed behind the gauges. Notice the screws removed from behind the radio This is the last of the 2010 dash. I had to move the airbag, and the duct to the new dash. __________________ Check out my Camaro http://www.camaro5.com/forums/showthread.php?t=84133

05-03-2013, 08:33 AM	#88
skuttduck Drives: 2010 RJT 2LT Camaro Join Date: May 2009 Location: East Lansing, MI Posts: 2,530	I didn't have the right center duct, so I had to drive the Camaro around like this for a few days. Here it is a photo of the Heads up display! Once I figured out that to install the center duct it has to screw into the trim piece, I called up Rodgers Chevrolet, and got ahold of Maureen, she hooked me up with the missing part trim, and center duct, and had it to me next day! Keep in mind I am only about 1.5 hours away, but again thanks Maureen! Cliffy looks stock again. __________________ Check out my Camaro http://www.camaro5.com/forums/showthread.php?t=84133

07-08-2013, 02:47 PM	#89
skuttduck Drives: 2010 RJT 2LT Camaro Join Date: May 2009 Location: East Lansing, MI Posts: 2,530	Latest mod is the red stitching on the shift knob and boot. Now to figure out a way to get that on the steering wheel and arm rests. __________________ Check out my Camaro http://www.camaro5.com/forums/showthread.php?t=84133

07-09-2013, 11:56 PM	#90
Aubrey64 Drives: 2010 Camaro LLT/RS Join Date: Apr 2012 Location: Plano, TX Posts: 2,685	Build looks great!! I did the same thing when I did the HUD install, I switched it out with a 2012 dash. It looks so much better IMO, and its definitely worth the install. Awesome job so far! __________________

01-09-2014, 06:27 PM	#91
sasha055 Drives: 2011 Camaro 2ss Cab Join Date: Dec 2013 Location: Seattle Posts: 47	I love how you colored the seats! Where did you get the paint from? Sasha

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Camaros in stock. Black 1SS, VR 2SS, RY 2LT, and RJT 2LT Lancaster, Pa	KBearZ28	Dealer Camaros for Sale	3	02-24-2010 06:45 PM
TPW 1/25/10 2LT RJT A6 R/S S/R available	Frank in MD	Dealer Camaros for Sale	2	02-17-2010 02:44 PM
Someone smashed my RJT 2LT FREAKIN' PICS INSIDE	ckaram	Camaro Photos \| Spyshots \| Video \| Media Gallery	69	01-03-2010 03:10 PM
1969 SS vs 2010 2LT ... vs 328i?	RMGee	Chevy Camaro vs...	18	11-04-2009 12:22 AM
Would like some input between 2LT and 1SS	mc4679	5th Gen Camaro SS LS LT General Discussions	14	05-07-2009 10:47 PM