07-30-2012, 03:44 PM | #1 |
need....more....hp
Drives: The Neighbor Hater Join Date: Dec 2010
Location: San Mateo, CA
Posts: 4,091
|
F/S: Street Scene Front Chin Spoiler
Up for sale is a Street Scene Front Chin Spoiler for an SS that is flat black. It has some double sided tape still attached, but it's easy to remove. It has small holes that were used to attach the splitter to another camaro. There are no scratches or cracks on it.
Price on this brand new would be $189, so I'm looking to get $110 OBO + shipping. Please let me know if you want any additional photos.
__________________
Mast Motorsports Built LS3 Stroker 418, IPS GT35R Twin Turbos, Exedy GTO4XD Twin Disc Clutch, Aeromotive A1000 Eliminator Stealth Fuel Pump, AEM Meth Injection, DSS 1400hp Axels, BC Coilovers, Pfadt & BMR Suspension, Hawk HPS Pads, Drilled/Slotted Rotors, Hurst Shifter, Custom Roll Cage by Blu808, T3 Ports, 22" Custom Concave Mesh Rims Last edited by pyr0b0y; 08-07-2012 at 12:28 PM. |
07-30-2012, 06:09 PM | #2 |
TRI COUNTY TAMPA
Drives: 2011 1SS/RS VR/BLK A6 Join Date: Jan 2011
Location: Trinity, Florida
Posts: 6,277
|
Does it only attach with 3m tape? Any drilling needed?
|
07-30-2012, 06:29 PM | #3 |
Drives: 2010 Black 2ss Chevy Camaro Join Date: Nov 2011
Location: Pearl City
Posts: 341
|
Can u check shipping to 96782 and does it use the same holes as the GM front ground splitter?
|
07-30-2012, 06:32 PM | #4 |
splitter
Could you tell me what shipping would be to 66030? Thanks!
|
|
07-30-2012, 06:58 PM | #5 | |
need....more....hp
Drives: The Neighbor Hater Join Date: Dec 2010
Location: San Mateo, CA
Posts: 4,091
|
I never installed it on my car, but the last person who installed it used both 3M tape and drilled it into the bumper. (I wouldn't trust just 3M tape).
Quote:
sending PM....
__________________
Mast Motorsports Built LS3 Stroker 418, IPS GT35R Twin Turbos, Exedy GTO4XD Twin Disc Clutch, Aeromotive A1000 Eliminator Stealth Fuel Pump, AEM Meth Injection, DSS 1400hp Axels, BC Coilovers, Pfadt & BMR Suspension, Hawk HPS Pads, Drilled/Slotted Rotors, Hurst Shifter, Custom Roll Cage by Blu808, T3 Ports, 22" Custom Concave Mesh Rims |
|
07-30-2012, 07:04 PM | #6 |
Drives: 2011 Camaro LS M6 Join Date: Sep 2011
Location: Oklahoma
Posts: 157
|
Price shipped to 73537
|
07-30-2012, 07:43 PM | #7 |
need....more....hp
Drives: The Neighbor Hater Join Date: Dec 2010
Location: San Mateo, CA
Posts: 4,091
|
This splitter only works with the SS Bumper FYI
__________________
Mast Motorsports Built LS3 Stroker 418, IPS GT35R Twin Turbos, Exedy GTO4XD Twin Disc Clutch, Aeromotive A1000 Eliminator Stealth Fuel Pump, AEM Meth Injection, DSS 1400hp Axels, BC Coilovers, Pfadt & BMR Suspension, Hawk HPS Pads, Drilled/Slotted Rotors, Hurst Shifter, Custom Roll Cage by Blu808, T3 Ports, 22" Custom Concave Mesh Rims |
08-07-2012, 12:27 PM | #8 |
need....more....hp
Drives: The Neighbor Hater Join Date: Dec 2010
Location: San Mateo, CA
Posts: 4,091
|
bump!
__________________
Mast Motorsports Built LS3 Stroker 418, IPS GT35R Twin Turbos, Exedy GTO4XD Twin Disc Clutch, Aeromotive A1000 Eliminator Stealth Fuel Pump, AEM Meth Injection, DSS 1400hp Axels, BC Coilovers, Pfadt & BMR Suspension, Hawk HPS Pads, Drilled/Slotted Rotors, Hurst Shifter, Custom Roll Cage by Blu808, T3 Ports, 22" Custom Concave Mesh Rims |
08-07-2012, 02:59 PM | #9 |
Drives: 2012 super black SS Join Date: May 2012
Location: Phila
Posts: 14
|
Shipping to 19047?
|
08-07-2012, 04:01 PM | #10 |
Shipping to 52404 please
|
|
08-07-2012, 07:22 PM | #11 |
need....more....hp
Drives: The Neighbor Hater Join Date: Dec 2010
Location: San Mateo, CA
Posts: 4,091
|
SOLD!
__________________
Mast Motorsports Built LS3 Stroker 418, IPS GT35R Twin Turbos, Exedy GTO4XD Twin Disc Clutch, Aeromotive A1000 Eliminator Stealth Fuel Pump, AEM Meth Injection, DSS 1400hp Axels, BC Coilovers, Pfadt & BMR Suspension, Hawk HPS Pads, Drilled/Slotted Rotors, Hurst Shifter, Custom Roll Cage by Blu808, T3 Ports, 22" Custom Concave Mesh Rims |
08-17-2012, 01:40 PM | #12 |
Drives: 2012 camaro SS blk on blk 6spd Join Date: Aug 2012
Location: los angeles
Posts: 1
|
Interested more piks please
hi, i like the part. Fits ss model right?
Is there any gaps on the fitment? Does it fit perfectly or are there gaps? Does it come with hardware? Would like more close up piks and piks from bottom. Thanks! |
08-17-2012, 06:05 PM | #13 |
Drives: 2011 Camaro LS Join Date: Feb 2011
Location: Southern California
Posts: 2,920
|
....look at the post right above you dude...
__________________
|
|
|
|
|