Emblem pros question, 1LE badges - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

joshylife · 08-03-2013, 02:08 AM

i need some help, ive seen a few of you with the 1LE badges from emblem pros, they look great! im wondering what sizes i need? im wanting to replace the back "SS" and the front grill "SS" are they the same size?

emblem pros has 3 different sizes and i want them to resemble the size of the factory ss badge size as much as possible.

heres what the website says

"Our first size (SMALL) is .5" tall by approximately 3.25" depending on spacing, and costs $27.99 each

Our second size (MEDIUM) is .66" tall by approximately 4.6" depending on spacing, and costs $32.99 each

Our third size (LARGE) is 1" tall by approximately 7" depending on spacing, and costs $37.99 each"

i would go try to half ass measure the ss badges myself but for 1. im an idiot and 2. i dont get to pick it up for another week

any help/pic/advice would be greatly appreciated, thanks!

and i was gonna post this in cosmetics/mods section but ive seen all the 1LE/emblem pro threads here, thought id have better luck.

Irishblackcoffee · 08-03-2013, 09:09 AM

The grill will take the small the hood will take two large and the trunk will take one medium. Hope this helps. To place on hood its 4" from the edge, 1" from the top and bottom.

BAPD77 · 08-03-2013, 02:19 PM

Im getting some too. Im going to ut the 1le emblem on the back on the left side and keep the stock ss badge.

joshylife · 08-03-2013, 04:50 PM

Irish thats perfect thanks. U have the small one on your grill? If so any pics?

canecorso69 · 08-03-2013, 08:07 PM

Quote:

Originally Posted by BAPD77

Im getting some too. Im going to ut the 1le emblem on the back on the left side and keep the stock ss badge.

Same here

04goatgirl · 08-03-2013, 08:21 PM

Quote:

Originally Posted by BAPD77

Im getting some too. Im going to ut the 1le emblem on the back on the left side and keep the stock ss badge.

That's where I placed mine. it looks stock. theres a pic under the 1LE emblem thread!
http://i90.photobucket.com/albums/k2...174204_316.jpg

joeybsyc · 08-03-2013, 08:59 PM

I think it would look better with the SS removed and placed on the right side in the factory placement. Looks busy with emblems on both sides, especially with the bowtie in the middle too. No offense meant, just my opinion.

joshylife · 08-03-2013, 09:21 PM

ya im with the minimalistic approach, i want to get rid of both the ss badges and replace them with small subtle 1LE badges, also prolly do a bowtie delete too, or matte black them at least, big gold donks. its like a rly hot curvy girl with a FAT over sized tongue piercing , its gotti and trashy to me kinda.

CrystalRedTintcoat · 08-03-2013, 09:44 PM

Quote:

Originally Posted by Irishblackcoffee

The grill will take the small the hood will take two large and the trunk will take one medium. Hope this helps. To place on hood its 4" from the edge, 1" from the top and bottom.

On the hood I used painters tape to align the letters. Go slow and triple measure.

Sent from my iPad using Tapatalk HD

CrystalRedTintcoat · 08-03-2013, 09:45 PM

I removed the bowtie from the front and rear. Installed heritage Grill and added an SS to center. Currently I have the 1LE badges on the hood. I'm thinking about adding the 1LE to the right rear with no bowtie.

Sent from my iPad using Tapatalk HD

Tara Martin · 08-04-2013, 12:26 AM

Did you see mine? Minimalistic, for sure!

CrystalRedTintcoat · 08-04-2013, 03:29 AM

Quote:

Originally Posted by Tara Martin

Did you see mine? Minimalistic, for sure!

Yes. I think you said you had (roger?) make them custom?

Sent from my iPad using Tapatalk HD

joshylife · 08-04-2013, 06:46 PM

i am emailing him about it now, he did a custom template to show me how it would look and everything, so cool. very responsive and helpful guy!

Irishblackcoffee · 08-04-2013, 08:45 PM

Quote:

Originally Posted by joshylife

Irish thats perfect thanks. U have the small one on your grill? If so any pics?

No I took off both SS emblems. Just have 1LE emblems.

08-03-2013, 02:08 AM	#1
joshylife lift.eat.money.sleep. Drives: 2013 2SS 1LE Join Date: Nov 2012 Location: Eureka CA Posts: 65	Emblem pros question, 1LE badges i need some help, ive seen a few of you with the 1LE badges from emblem pros, they look great! im wondering what sizes i need? im wanting to replace the back "SS" and the front grill "SS" are they the same size? emblem pros has 3 different sizes and i want them to resemble the size of the factory ss badge size as much as possible. heres what the website says "Our first size (SMALL) is .5" tall by approximately 3.25" depending on spacing, and costs $27.99 each Our second size (MEDIUM) is .66" tall by approximately 4.6" depending on spacing, and costs $32.99 each Our third size (LARGE) is 1" tall by approximately 7" depending on spacing, and costs $37.99 each" i would go try to half ass measure the ss badges myself but for 1. im an idiot and 2. i dont get to pick it up for another week any help/pic/advice would be greatly appreciated, thanks! and i was gonna post this in cosmetics/mods section but ive seen all the 1LE/emblem pro threads here, thought id have better luck.

08-03-2013, 09:09 AM	#2
Irishblackcoffee Drives: 13 1LE GBE M6, 12 VR M6 #872 Join Date: Aug 2012 Location: Guntersville, AL Posts: 393 View My Garage	The grill will take the small the hood will take two large and the trunk will take one medium. Hope this helps. To place on hood its 4" from the edge, 1" from the top and bottom. __________________ '13 1LE "MAX" '12 ZL1 "SAPPER"

08-03-2013, 08:59 PM	#7
joeybsyc Drives: 2010 Aqua Blue Metallic 2SS Join Date: Jul 2011 Location: PA Posts: 2,010 View My Garage	I think it would look better with the SS removed and placed on the right side in the factory placement. Looks busy with emblems on both sides, especially with the bowtie in the middle too. No offense meant, just my opinion. __________________

08-03-2013, 09:45 PM	#10
CrystalRedTintcoat Drives: 2013 2SS 1LE NPP GBE Join Date: Sep 2012 Location: Bay Area, online, & in my 1LE Posts: 2,667 View My Garage	I removed the bowtie from the front and rear. Installed heritage Grill and added an SS to center. Currently I have the 1LE badges on the hood. I'm thinking about adding the 1LE to the right rear with no bowtie. Sent from my iPad using Tapatalk HD __________________ 2013 1LE NPP GBE Mods Track Days

08-04-2013, 12:26 AM	#11
Tara Martin Loves Camaros Drives: Red '79 Z28, '21 Red Hot M6 ZL-1! Join Date: Sep 2012 Location: Corpus Christi, TX Posts: 1,623 View My Garage	Did you see mine? Minimalistic, for sure! Attached Images __________________ Old and new, sharing space!

08-03-2013, 02:19 PM	#3
BAPD77 Drives: 2013 Yellow ZL1/2015 Z51 Stingray Join Date: Jul 2013 Location: Broken Arrow, OK Posts: 195	Im getting some too. Im going to ut the 1le emblem on the back on the left side and keep the stock ss badge.

08-03-2013, 04:50 PM	#4
joshylife lift.eat.money.sleep. Drives: 2013 2SS 1LE Join Date: Nov 2012 Location: Eureka CA Posts: 65	Irish thats perfect thanks. U have the small one on your grill? If so any pics?

08-03-2013, 09:21 PM	#8
joshylife lift.eat.money.sleep. Drives: 2013 2SS 1LE Join Date: Nov 2012 Location: Eureka CA Posts: 65	ya im with the minimalistic approach, i want to get rid of both the ss badges and replace them with small subtle 1LE badges, also prolly do a bowtie delete too, or matte black them at least, big gold donks. its like a rly hot curvy girl with a FAT over sized tongue piercing , its gotti and trashy to me kinda.

08-04-2013, 06:46 PM	#13
joshylife lift.eat.money.sleep. Drives: 2013 2SS 1LE Join Date: Nov 2012 Location: Eureka CA Posts: 65	i am emailing him about it now, he did a custom template to show me how it would look and everything, so cool. very responsive and helpful guy!