08-03-2009, 08:11 AM | #1 |
LSUFAN
Drives: 2010 Chevy Camaro RS Join Date: Aug 2009
Location: Thurmont, Maryland
Posts: 2
|
2010 Camaro Rear Window Lower Window Seal Improperly Installed at Delivery/Fix
Has anyone had issues with the rear window, lower seal being improperly installed at delivery? If so, what was the fix?
|
08-03-2009, 08:26 AM | #2 |
Drives: 2010 Camaro/08 Tundra Join Date: Feb 2009
Location: Little Rock Arkansas
Posts: 797
|
Make your dealer fix it. It helps with trend analysis.
__________________
Rally Yellow 2SS/RS with Custom painted Black Rally Stripes, Heritage grill, Corsa cat backs with x pipe, CAI.
Delivered: 8/18/09!!!!Yes!!!! "This is CHEVY country. On a quiet night you can hear a Ford rust." |
08-03-2009, 09:34 AM | #3 |
owner/operator VIN 1760
|
Are you refering to the rubber strip between the rear window and the trunk lid?
If so I found mine falling half way off. I havent taken it in to dealer yet because I just noticed it Saturday night. I hope it just has to be re-adhered with correct type of sealer.
__________________
"With Great POWER comes Great Responsibility" - Stan Lee Last edited by Jarvis59; 08-03-2009 at 12:56 PM. |
08-03-2009, 07:12 PM | #4 |
Drives: '13 ZL1 #662; '10 SS; '99 SS Join Date: May 2009
Location: Clovis CA
Posts: 457
|
I got one. Just discovered after coming back from the shop to fix a tranny fluid leak. At least the spoiler's not loose.
__________________
|
08-04-2009, 12:55 PM | #5 |
owner/operator VIN 1760
|
Thats the EXACT same issue i have. Same place, same disatnce of the rubber lip pulling off.
__________________
"With Great POWER comes Great Responsibility" - Stan Lee |
08-04-2009, 12:57 PM | #6 |
Drives: 18 ZL1 A10 Join Date: Nov 2008
Location: South East, FL
Posts: 3,024
|
Oh, come on now, this problem has been around a while now. why hasn't the factory fixed this already? It didnt start yesterday.
=Bobby
__________________
2017 ZL1 M6 Bog City, 2013 ZL1 M6, 2010 2SS M6
ZL1::J-E-T-S JETS JETS JETS |
08-04-2009, 02:02 PM | #7 |
Drives: 2014 RED HTO 2LT/RS Join Date: Apr 2009
Location: Fairfax VA
Posts: 115
|
I just re-glued mine up... 10 seconds of work. Done
|
08-17-2009, 12:21 PM | #8 |
LSUFAN
Drives: 2010 Chevy Camaro RS Join Date: Aug 2009
Location: Thurmont, Maryland
Posts: 2
|
All: My dealer had a Custom Glass and Upholstry shop re-glue my strip.....and it came off again. My dealer is now going to remove my rear window and re-attach the strip.
|
08-17-2009, 12:35 PM | #9 |
Drives: 2010 Camaro/08 Tundra Join Date: Feb 2009
Location: Little Rock Arkansas
Posts: 797
|
Good for them, its they're problem.
__________________
Rally Yellow 2SS/RS with Custom painted Black Rally Stripes, Heritage grill, Corsa cat backs with x pipe, CAI.
Delivered: 8/18/09!!!!Yes!!!! "This is CHEVY country. On a quiet night you can hear a Ford rust." |
08-17-2009, 11:51 PM | #10 |
Drives: '13 ZL1 #662; '10 SS; '99 SS Join Date: May 2009
Location: Clovis CA
Posts: 457
|
Dealer 'fixed' it but it's coming loose again. Just like its supposed to.
__________________
|
03-18-2010, 03:54 PM | #11 |
Beeliever!
Drives: 2010 2LT Coupe Automatic Join Date: May 2009
Location: East Central Wisconsin
Posts: 33
|
I know this thread is old but wanted other people to know that my seal is coming loose also. I took it to my dealer today and they want to replace the entire window. The tech said that is the best solution for this problem. Just putting glue on the seal is not the proper fix according to the tech.
|
03-18-2010, 04:30 PM | #12 | |
Drives: 05/07 Chevy's Join Date: Aug 2009
Location: Florida
Posts: 392
|
Quote:
|
|
03-19-2010, 10:28 PM | #13 |
Drives: '13 ZL1 #662; '10 SS; '99 SS Join Date: May 2009
Location: Clovis CA
Posts: 457
|
I got that new strip last month and it came loose as well. I'll mention the urethane thing to the service adviser on the next attempt. Thanks for the info.
__________________
|
03-09-2011, 09:36 AM | #14 |
Drives: 2010 2LT Camaro, RS Package Join Date: Mar 2011
Location: United States
Posts: 3
|
I'm dealing with the same issue. I took it back to the dealership and they "fixed" it by putting adhesive on the strip. Naturally it held until my next wash. I tried it again myself using 3M Weatherstrip Adhesive but the result was the same. I'm very hesitant in having the dealership fix it by removing the window because I spent a lot of time polishing the swirls out of the paint and I'd like to keep it that way. Any other thoughts how to permanently fix it? Thanks.
|
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
New Camaro Exterior and Interior Stainless Steel Trim Parts from RPI Designs! | RPI Designs | Cosmetics and Lighting Modification Discussions | 36 | 04-02-2020 05:32 PM |
Camaro Product Manager - interview | Moose | 5th Gen Camaro SS LS LT General Discussions | 11 | 04-04-2012 06:10 PM |
GM memo to dealers | Moose | 5th Gen Camaro SS LS LT General Discussions | 41 | 02-04-2010 07:33 PM |
Official Camaro Convertible CONCEPT Press Release | Tran | Camaro Convertible Forum | 12 | 11-18-2009 07:05 PM |
Camaro (concept) Press Release!! | Pencil.Fight | 5th Gen Camaro SS LS LT General Discussions | 4 | 07-21-2008 03:33 PM |