11-02-2009, 09:28 PM | #1 |
ZEUSS
|
Removal of rear bumper
For the love of God I can figure out why the rear bumper has to be removed to change the reverse lights. I want to install LED's but has anybody taken off or know how the rear bumper comes off? I searched but could find anything. I'm sure its pretty simple, just don't want to go and start taking it off and break a pesky little tab holding it on.
|
11-02-2009, 09:40 PM | #2 |
Drives: 05/07 Chevy's Join Date: Aug 2009
Location: Florida
Posts: 392
|
Its very easy, just be careful and have a second set of hands .
Use steps 3-7. |
11-02-2009, 09:51 PM | #3 |
ZEUSS
|
NOYCE!!! Thx buddy!!
|
11-02-2009, 10:03 PM | #4 |
Drives: 05/07 Chevy's Join Date: Aug 2009
Location: Florida
Posts: 392
|
Not a problem. When you get ready to remove it you will need to pull out on the sides. Just be careful when pulling them out.
|
11-02-2009, 10:06 PM | #5 | ||
Drives: 2010 Camaro 2LT/RS ABM Join Date: Sep 2009
Location: Sugar Land, TX
Posts: 13,075
|
Quote:
__________________
2LT, RS, AT6 ABM, Gray Leather
Quote:
1100 Order accepted at dealer: 9/15/2009 - NPGV41. 2000 Order accepted by GM: 9/29/2009 3000 Accepted By Production Control: 9/30/2009 - TPW 10/26/09 3100 Sequenced:10/12/09 3300 Scheduled For Production:10/13/09 3400 Broadcast:10/22/09 3800 Produced:10/27/09 4000 Available To Ship:10/28/09 4200 Shipped:10/29/09 5000 Delivered To The Dealer:11/09/09 6000 Delivered To Customer:11/12/09 |
||
11-02-2009, 10:23 PM | #6 | |
ZEUSS
|
Quote:
I have them in my dome light and they are pretty dam bright and they fit perfect with no modifications. I went with the WLED-xLX because they have a wide beam (120 degrees) compared to the WLED-WHP9-T because they aren't that bright. (but bright enough for the trunk) When I install them I will post some pictures. Bright as hell! Not so bright for reverse lights |
|
11-02-2009, 10:58 PM | #7 | |
Drives: 2010 Camaro 2LT/RS ABM Join Date: Sep 2009
Location: Sugar Land, TX
Posts: 13,075
|
Thanks, Im looking forward to seeing those pics...
__________________
2LT, RS, AT6 ABM, Gray Leather
Quote:
1100 Order accepted at dealer: 9/15/2009 - NPGV41. 2000 Order accepted by GM: 9/29/2009 3000 Accepted By Production Control: 9/30/2009 - TPW 10/26/09 3100 Sequenced:10/12/09 3300 Scheduled For Production:10/13/09 3400 Broadcast:10/22/09 3800 Produced:10/27/09 4000 Available To Ship:10/28/09 4200 Shipped:10/29/09 5000 Delivered To The Dealer:11/09/09 6000 Delivered To Customer:11/12/09 |
|
11-03-2009, 04:07 PM | #8 |
I am not "Fast & Furious"
Drives: 2010 Camaro LSX454 1LE Join Date: Nov 2008
Location: Greeley Colorado
Posts: 1,040
|
Hey Thiggin, can you post the instructions for the removal of the front fascia and install of the front lip GFX? Thanks alot if you can.
__________________
The day I take a bend too fast
Judgement that could be my last I'll be wiped right off the slate Don't wait up 'cause I'll be late, I'll be late |
11-03-2009, 04:44 PM | #9 |
Drives: 05/07 Chevy's Join Date: Aug 2009
Location: Florida
Posts: 392
|
You ask and you shall receive .
|
11-10-2009, 09:42 PM | #10 |
ZEUSS
|
Noyce!!! I was just going to request this. I want to wire my DRL's to come on with the parking lights like thebrainhart did with his. I'll also be converting mine to LED so it doesn't blind anybody in the night. I just want the look of the fogs at night and have the DRL's still work in the day.
Thx thiggin2!! |
07-06-2010, 12:59 PM | #11 |
Drives: 2010 SIM 2SS/RS MONSTER Join Date: Aug 2009
Location: LOS ANGELES
Posts: 1,506
|
nice info
__________________
HP MONSTER' SOUTHERN CALIFORNIA BUILT, LMR CAI, CUSTOM GRIND CAM, CUSTOM BUILT CNC PORTED AND POLISHED HEADS, FAST 102MM INTAKE MANIFOLD,ARH LONG TUBES AND HIGH FLOW CATS, BIGGER INJECTORS, VALVES SPRINGS RETAINERS, MGW SHORT SHIFTER, EIBACH SPRINGS, FACTORY CHROMED WHEELS, BLACKED OUT EMBLEMS, BLACKED OUT ROOF,BLACKED OUT MARKERS, 3.5 INCH ELECTRONIC CUTOUTS, FLOWMASTERS, ZEX WET 150 SHOT, FOR A GRAND TOTAL OF =630 REAR WHEEL TORQUE ,AND 600 REAR WHEEL HORSEPOWER
MY JOURNALhttp://www.camaro5.com/forums/showth...02#post2023802 SOON TWIN TURBO SETUP |
07-06-2010, 01:03 PM | #12 |
Drives: ( . )( . ) Join Date: Feb 2010
Location: San Diego, CA
Posts: 2,827
|
where you able to change the reverse bulbs to LED?,
|
07-19-2010, 08:40 PM | #13 |
Drives: 2010 SIM 2SS/RS MONSTER Join Date: Aug 2009
Location: LOS ANGELES
Posts: 1,506
|
COULD OF BUT I JUST TINTED THEM FOR NOW !
__________________
HP MONSTER' SOUTHERN CALIFORNIA BUILT, LMR CAI, CUSTOM GRIND CAM, CUSTOM BUILT CNC PORTED AND POLISHED HEADS, FAST 102MM INTAKE MANIFOLD,ARH LONG TUBES AND HIGH FLOW CATS, BIGGER INJECTORS, VALVES SPRINGS RETAINERS, MGW SHORT SHIFTER, EIBACH SPRINGS, FACTORY CHROMED WHEELS, BLACKED OUT EMBLEMS, BLACKED OUT ROOF,BLACKED OUT MARKERS, 3.5 INCH ELECTRONIC CUTOUTS, FLOWMASTERS, ZEX WET 150 SHOT, FOR A GRAND TOTAL OF =630 REAR WHEEL TORQUE ,AND 600 REAR WHEEL HORSEPOWER
MY JOURNALhttp://www.camaro5.com/forums/showth...02#post2023802 SOON TWIN TURBO SETUP |
07-20-2010, 08:06 AM | #14 |
Drives: 5th Gen CGM 2SS/RS Sunroof Join Date: Jan 2010
Location: Seminole, FLA
Posts: 25
|
Recommend these for the DIY section
|
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
HUGE problem with warped rear bumper fascia!!! | camero | Camaro Issues / Problems | Warranty Discussions | TSB and Recalls | 33 | 04-05-2012 11:20 AM |
LMPerformance, Spohn Camaro 2010 Tubular Rear Toe Links with Polyurethane Bushings. | LMPerformance | V8 Bolt-Ons & Tunes | 0 | 10-19-2009 01:55 PM |
LM Performance, Spohn Camaro 2010 Tubular Rear Toe Links with Spherical Rod Ends. | LMPerformance | V8 Bolt-Ons & Tunes | 0 | 10-19-2009 01:44 PM |
LM Performance, Spohn Camaro 2010 Tubular Rear Toe Links with Del-Sphere Pivot Joints | LMPerformance | V8 Bolt-Ons & Tunes | 0 | 10-19-2009 01:39 PM |
69 Camaro Production Numbers | CBR9Seadoo | 1st & 2nd Generation Camaros | 6 | 04-02-2007 09:51 AM |