04-28-2016, 07:19 AM | #1 |
11.91 ET Bone stock
Drives: 2015 Camaro ZL1 Join Date: Nov 2014
Location: Canada
Posts: 353
|
Stupid question when ordering 10 spoke replicas
Hi guys
I searched and couldn't find...sorry for the dumb question... I'm looking at ordering 18 inch replicas (black 10 spoke) and not sure which finish best matches the stock front wheels... Are you guys ordering matte or gloss? Our factory wheel isn't full gloss and it's not true matte either Thanks in advance! Chris |
04-28-2016, 09:19 AM | #2 |
Coupe Newbie
Drives: 2017 ZL1, 2021 Corvette Convertible Join Date: Jul 2011
Location: Columbus, Ohio
Posts: 3,281
|
I purchased a set of Factory Reproduction wheels for use during the winter months. I ordered them with the satin black finish.
__________________
Last edited by hawk02; 04-28-2016 at 03:56 PM. Reason: added photo |
04-28-2016, 10:34 AM | #3 |
Drives: 2018 Hyper Blue 1SS 1LE Join Date: Jul 2011
Location: Brownsburg, Indiana
Posts: 6,231
|
Gloss here
Ryan
__________________
Ryan
* 2018 1SS 1LE Camaro Hyper Blue Metallic Car Build: http://www.camaro6.com/forums/showth...0#post10049680 |
04-28-2016, 11:48 AM | #4 |
Go fast, please.
|
From what I have seen the factory finish is 20% gloss so it's definitely closer to being matte than gloss.
|
04-28-2016, 12:47 PM | #5 |
Drives: 2015 ZL1 Join Date: May 2015
Location: ILLINOIS
Posts: 109
|
I called them and the salesmen was no help as far as finish so I rolled the dice and ordered a set of 18x11 in satin black and they where a perfect match.
__________________
ERL 434 LSA super block with 6 bolt 1/2" studs
Ported stock blower 2.55/9.55 and NW 102 tb 5" JLT CAI, custom radiator Mamofied TFS heads with 1.8 Y/T rockers and Johnson lifters FI interchiller E85 flex fuel Circle D 3200 Tuned by Speed inc. 755/730 on 93 and 850/822 on corn |
04-28-2016, 09:53 PM | #6 |
11.91 ET Bone stock
Drives: 2015 Camaro ZL1 Join Date: Nov 2014
Location: Canada
Posts: 353
|
Thanks guys Satin it is!
Cheers Chris |
|
|
|
|