HURST SHIFTER 2010 Camaro - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

motor1 · 12-28-2009, 12:26 PM

SOLD THANKS.

I am offering for sale a SLIGHTLY used Hurst shifter for the 2010 Camaro SS. It has approximately 75 miles on it and is in New Condition with zero flaws. The shifter will be shipped in the original box with ALL instructions and original parts needed, including thread locker and lubricant grease. I am asking a very reasonable $245.00 INCLUDING shipping to lower 48 states. Item will be shipped FEDEX with tracking number. If you are in the nearby vicinity I will assist with installation. I will go so far as allowing you to drive my car if you show up in your Camaro to make sure it is to your liking. Nothing to hide here. If you have any questions I can be reached at 757-831-5122.

darenf02 · 12-28-2009, 03:05 PM

Why are you selling? I'm researching shifters and am curious when someone is selling one they've barely used.

56chevywagon · 12-29-2009, 09:42 AM

Kinda curious myself...why are you seling? I have been looking into this shifter and am looking for what people`have thought.

motor1 · 12-29-2009, 10:31 AM

I sent 2 PM's already but I guess I will try to explain here. The throw on the Hurst is very short, I know that is advertised but I figured I would try anyway. I like the old school look and that was the deciding factor. The shift effort is a little too aggressive for me, meanining its a little more force required than I prefer. It is just the way it is, nothing good or bad, just the way it is. I am going to try something different. There is a little vibration at wide open throtle, but I rarely get to that in normal driving and you have to be listening for it. There is a service pack being offered by Hurst that guarantees to fix any noise. Basically I want something a little closer to the stock feeling but with slightly shorter throws. I have offered anyone to come drive my car to see that there is absolutely nothing wrong with it, its just not for me. Hope that helps. I am gonna give it another day and then its off to Ebay. Thanks

motor1 · 12-29-2009, 08:11 PM

New Price. 245.00 Shipped

muybellacamaro · 12-30-2009, 01:14 PM

I like the old school look as well but I am still undecided. I just received my car as a Christmas gift....and what a gift it is!! Now, I can't wait to start adding all the extra's to make it even better.

buelldude · 12-30-2009, 07:28 PM

lets meet so I can see what your talking about??? I have seen other shifter knobs that didn't have that logo on it??

MK69RSSS · 12-30-2009, 08:12 PM

Buy the MTI its awesome....

motor1 · 12-30-2009, 08:44 PM

buelldude,
Are you in VA Beach?

MK69RSSS,
Are you serious?

12-28-2009, 12:26 PM	#1
motor1 Drives: 2010 Camaro 1SS/RS/M6.....no longer Join Date: Dec 2009 Location: Virginia Posts: 479 View My Garage	HURST SHIFTER 2010 Camaro SOLD SOLD THANKS. I am offering for sale a SLIGHTLY used Hurst shifter for the 2010 Camaro SS. It has approximately 75 miles on it and is in New Condition with zero flaws. The shifter will be shipped in the original box with ALL instructions and original parts needed, including thread locker and lubricant grease. I am asking a very reasonable $245.00 INCLUDING shipping to lower 48 states. Item will be shipped FEDEX with tracking number. If you are in the nearby vicinity I will assist with installation. I will go so far as allowing you to drive my car if you show up in your Camaro to make sure it is to your liking. Nothing to hide here. If you have any questions I can be reached at 757-831-5122. Last edited by motor1; 01-02-2010 at 01:01 PM.

12-28-2009, 03:05 PM	#2
darenf02 Drives: 2010 Camaro 2SS/RS 6SP LS7 swapped Join Date: Dec 2009 Location: Dover, TN Posts: 56 View My Garage	Why are you selling? I'm researching shifters and am curious when someone is selling one they've barely used. __________________ LS7 swap stage 3 cam, MSD intake, NW 103 TB, LME heads, JBA ceramic coated LT's 1 7/8" Flowmaster 3" w/high flow cats & X pipe, MPD Motorsports cowl induction hood, CAI, ZL1 front clip, Jet Mass-Air Sensor, rear valence, Stealth bulbs, 20% tint, taillight blackouts, side marker blackouts, modern SS emblem back, 427 rear emblem, S.S. rear spoiler, MGW shifter, black ZL1 replica wheels (wider), 160* thermostat, front firing 2x12" Rockford Fosgate subs, NA 619rwhp on Mustang Dyno

12-29-2009, 09:42 AM	#3
56chevywagon Drives: 10 Camaro SS - 03 Silverado SS Join Date: Oct 2008 Location: Phoenix Posts: 75	Kinda curious myself...why are you seling? I have been looking into this shifter and am looking for what people`have thought. __________________ 2003 Silverado SS - Mods: Polished Radix S/C 3.10 pulley, Jerry's Transmissions Inc (Sprayed99) Built Tranny, Yank TT3000 Stall Converter, MSD Super Conductor 8.5 Wires, Airaid box w/ K&N Cone Filter, Flex-A-Lite 282 Elec. Fans, Flowmaster 50 Series Mufflers, Helwig Rear Anti Sway Bar, and a Shopman SS Bowtie. 2010 Camaro RS/SS- VIN 9852 - 2SS, RS Package, Inferno Orange w/ Cyber Gray Stripes, Inferno Orange Interior Accents, Body Color Engine Covers, Sunroof

12-29-2009, 08:11 PM	#5
motor1 Drives: 2010 Camaro 1SS/RS/M6.....no longer Join Date: Dec 2009 Location: Virginia Posts: 479 View My Garage	BUMP FOR NEW PRICE New Price. 245.00 Shipped

12-30-2009, 07:28 PM	#7
buelldude car enthusiasts Drives: 2012 2SS Join Date: Jul 2009 Location: virginia Posts: 708 View My Garage	lets meet so I can see what your talking about??? I have seen other shifter knobs that didn't have that logo on it?? __________________

12-29-2009, 10:31 AM	#4
motor1 Drives: 2010 Camaro 1SS/RS/M6.....no longer Join Date: Dec 2009 Location: Virginia Posts: 479 View My Garage	I sent 2 PM's already but I guess I will try to explain here. The throw on the Hurst is very short, I know that is advertised but I figured I would try anyway. I like the old school look and that was the deciding factor. The shift effort is a little too aggressive for me, meanining its a little more force required than I prefer. It is just the way it is, nothing good or bad, just the way it is. I am going to try something different. There is a little vibration at wide open throtle, but I rarely get to that in normal driving and you have to be listening for it. There is a service pack being offered by Hurst that guarantees to fix any noise. Basically I want something a little closer to the stock feeling but with slightly shorter throws. I have offered anyone to come drive my car to see that there is absolutely nothing wrong with it, its just not for me. Hope that helps. I am gonna give it another day and then its off to Ebay. Thanks

12-30-2009, 01:14 PM	#6
muybellacamaro Drives: ++ Join Date: Dec 2009 Location: VB Posts: 14	I like the old school look as well but I am still undecided. I just received my car as a Christmas gift....and what a gift it is!! Now, I can't wait to start adding all the extra's to make it even better.

12-30-2009, 08:12 PM	#8
MK69RSSS Drives: TOO MANY TO LIST Join Date: Aug 2009 Location: MADISON MS Posts: 77	Buy the MTI its awesome.... __________________

12-30-2009, 08:44 PM	#9
motor1 Drives: 2010 Camaro 1SS/RS/M6.....no longer Join Date: Dec 2009 Location: Virginia Posts: 479 View My Garage	buelldude, Are you in VA Beach? MK69RSSS, Are you serious?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
PEDDERS SUCCESSFULLY FITS 305s ON ALL 4 CORNERS!	Info@PeddersUSA.com	Suspension / Brakes / Chassis	467	06-11-2013 09:45 PM
An interesting Camaro (and GM) story! I just bought my 2010 Camaro!	Camarodriver	Camaro Price \| Ordering \| Tracking \| Dealers Discussions	12	11-28-2010 03:52 PM
Official Camaro Convertible CONCEPT Press Release	Tran	Camaro Convertible Forum	12	11-18-2009 07:05 PM
Pedders Suspension Benchmark Track Testing and New Jersey Track Day	Info@PeddersUSA.com	USA - NY / NJ / PA	35	10-26-2009 05:20 PM
first Camaro Hurst shifter installed in 2010 Camaro	2SSRS@Gen5diy	V8 and V6 Transmissions / Driveline (6L80 / 6L50 / TR6060 / AY6)	347	10-17-2009 12:10 PM