LED Illuminated Door Sill Plates Installed! - Page 5 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Apex Motorsports · 12-20-2012, 07:58 PM

Quote:

Originally Posted by almarlowe

Why no wiring diagram, people have been asking for it-I'd order them tonight if I had it and knew I could wire them myself.

That is because the manufacturer has yet to provide one. However, it is very easy. Here is Apex Paul's version of a wiring DIY.

Quote:

Originally Posted by Apex Paul

On the passenger side, remove the kick panel, locate the wide connector with the release, locate wires A7 and B7 which are the dome power/ground.

steel insane · 12-21-2012, 04:30 PM

Quote:

Originally Posted by Apex Chase

That is because the manufacturer has yet to provide one. However, it is very easy. Here is Apex Paul's version of a wiring DIY.

since it comes apart, then I could repaint it satin black?

Apex Motorsports · 12-22-2012, 05:37 AM

Quote:

Originally Posted by steel insane

since it comes apart, then I could repaint it satin black?

Sure, no reason you couldn't do that. That should look great.

pierre777 · 12-22-2012, 12:12 PM

Just received mine a couple of days ago and did the install my self , piece of cake and I wired them to my ABL , here's how the look

rdblan2 · 01-06-2013, 04:06 PM

Standing by for red...and subscribing...

ZoMBiE_KMF · 01-07-2013, 12:22 AM

ooh i like these.. i see them on my car in the future

NYJets77 · 01-07-2013, 07:59 AM

would prefer black with clear/white LEDs

MGD · 01-07-2013, 11:17 AM

I did modified mine as I didn't like the heights of them, and while you at it, you could change the color easily.

http://www.camaro5.com/forums/showthread.php?t=267939

steel insane · 01-07-2013, 11:29 AM

Quote:

Originally Posted by MGD

I did modified mine as I didn't like the heights of them, and while you at it, you could change the color easily.

http://www.camaro5.com/forums/showthread.php?t=267939

What was the height issue?

BTW, I want to change the color of the sill plate to black from polished/chrome.

MGD · 01-09-2013, 11:31 PM

The height issue was the plexiglass itself and the 5mm thick double tape. If you stick it on like this, you would have an 1/8" gap between the sill and plate.

coolviet · 05-04-2013, 01:33 PM

Quote:

Originally Posted by Apex Chase

It is not seem to be quite that easy. Here are is a post from someone that looked at doing that.

Is there anyway you can post the DIY instructions??

BGzl585 · 07-10-2013, 06:38 AM

I know people are looking for different colors check this site out

http://www.justautotrim.com/camaro-l...l#.Ud1HI1y9LCR

OmniCamaro · 07-17-2013, 08:59 PM

Has anyone purchased the new design? I know the new ones are GM Certified and look much better than the originals, to me. Also with custom text if wanted, nice!

I'd love to get a pair at some point but want to hear reviews of the latest version.

Apex Motorsports · 07-18-2013, 06:35 PM

Quote:

Originally Posted by OmniCamaro

Has anyone purchased the new design? I know the new ones are GM Certified and look much better than the originals, to me. Also with custom text if wanted, nice!

I'd love to get a pair at some point but want to hear reviews of the latest version.

We have sold quite a few of them. Check our sales thread in the vendor area. There are some posts from members that have bought them.

12-22-2012, 12:12 PM	#60
pierre777 HT5 COTW 9/3/2012 Drives: Cyber Bullet Join Date: Jun 2011 Location: lebanon Posts: 4,555 View My Garage	Just received mine a couple of days ago and did the install my self , piece of cake and I wired them to my ABL , here's how the look __________________

01-06-2013, 04:06 PM	#61
rdblan2 Drives: 2SS RS Join Date: Mar 2010 Location: MD Posts: 1,272	Standing by for red...and subscribing... __________________ Livernois 2C cam and tune, LS3 conversion, Roto-Fab intake, Kooks headers, DSS driveshaft and axles, BMR suspension parts, VMax ported throttle body, Whipple blower. (623hp).

01-07-2013, 12:22 AM	#62
ZoMBiE_KMF Camaro Club of NM Drives: '10 2SS/RS, Sold: [COTW 2/20/12] Join Date: Oct 2010 Location: Albuquerque, NM Posts: 1,570 View My Garage	ooh i like these.. i see them on my car in the future __________________ My Build Thread:

01-07-2013, 11:17 AM	#64
MGD Drives: 16 Camaro SS Join Date: Jul 2012 Location: Menifee Posts: 821	I did modified mine as I didn't like the heights of them, and while you at it, you could change the color easily. http://www.camaro5.com/forums/showthread.php?t=267939 __________________ Interior: Adrenaline Red. SS/2SS, M6, NPP, Sun Roof, 8" Nav. Black 5 Spoke Wheels.

01-09-2013, 11:31 PM	#66
MGD Drives: 16 Camaro SS Join Date: Jul 2012 Location: Menifee Posts: 821	The height issue was the plexiglass itself and the 5mm thick double tape. If you stick it on like this, you would have an 1/8" gap between the sill and plate. __________________ Interior: Adrenaline Red. SS/2SS, M6, NPP, Sun Roof, 8" Nav. Black 5 Spoke Wheels.

01-07-2013, 07:59 AM	#63
NYJets77 Drives: 2013 2LT/RS Summit White Join Date: Feb 2011 Location: NY Posts: 1,283	would prefer black with clear/white LEDs

07-10-2013, 06:38 AM	#68
BGzl585 SuperCharged Drives: 2011 Camaro Zl585 Join Date: Apr 2013 Location: Herndon Posts: 21	I know people are looking for different colors check this site out http://www.justautotrim.com/camaro-l...l#.Ud1HI1y9LCR

07-17-2013, 08:59 PM	#69
OmniCamaro US Veteran Drives: 2011 Silver Ice Metallic 2SS/RS A6 Join Date: Jan 2011 Location: Bossier City, La Posts: 1,407	Has anyone purchased the new design? I know the new ones are GM Certified and look much better than the originals, to me. Also with custom text if wanted, nice! I'd love to get a pair at some point but want to hear reviews of the latest version. __________________ *Dear Lord, give me the strength to carry on despite my Camaro addiction!* JRE iTSX tune, full cat-less Dynatech exhaust, CAI intake, Stillen Slotted/Drilled Rotors, RB braided brake lines, BMR lowering springs, (reserved for definite future MODS)