05-17-2017, 11:56 PM | #1 |
Drives: 2013 Camaro 2SS/ 2015 GMC Acadia Join Date: Jan 2016
Location: Central Illinois
Posts: 46
|
Blkcamaro81 2013 SS Whipple build
Hello all! Thought I'd start a build thread on my Camaro. I've been working on it since I bought it back in January of 2016.
Here is the first day I bought it. Attachment 872943 I started out with JDP Motorsports anti-wheel hop kit. Real improvement over the stock suspension. Completely eliminated the massive amounts of wheel hop I was experiencing. Then was a heritage grill. Attachment 872944 CAI cold air intake installed Attachment 872945 Then came what I thought would be my only winter mods. MGW short throw and kooks 1 7/8 headers with a remote tune from dynosteve. I also threw on z28 replicas and nitto 555 g2s Attachment 872949 Attachment 872950 Attachment 872955 I then, through strategic negotiations with my wife bought a whipple supercharger. I started the install last night. I'm leaving on vacation Friday, so it will be a bit for an update. Attachment 872957 Attachment 872956 Whipples instructions have been decent so far, but there have been some omissions/discrepancies. First is how the heat exchanger mounts to the mounts. The instructions just say to use supplied bolts/washers/nuts, however, you need to put grommets and 'spuds' on like the pics below. Attachment 872958 Attachment 872959 Attachment 872960 Next issue was the heat exchanger pump. The pump wasn't clocked ideally. I turned it so the outlet was angled up towards the heat exchanger. I also had to cut roughly 3 1/4" from the hose 'A' that runs from the outlet to the heat exchanger. I then notched a plastic shield so the hose could run through there. Attachment 872961 Attachment 872962 Attachment 872963 That's it for the moment. More to follow!
__________________
2013 2ss ls3- CAI cold air, kooks 1 7/8, flowmaster outlaw axle back, zl1 fuel pump, adm fpcm.
COMING SOON! 2.9l whipple supercharger |
05-18-2017, 08:05 AM | #2 |
Drives: 2010 Camaro SS Join Date: Mar 2017
Location: Brandywine Maryland
Posts: 124
|
WOW love the rims and all the hard very nice!!!!
|
10-09-2021, 08:41 PM | #3 |
Drag and Drive is Life
Drives: 2010 Camaro 2SS RS A6 LS3 Whipple Join Date: Aug 2021
Location: TX
Posts: 142
|
What happen to your build just curious?
__________________
My build link... https://www.camaro5.com/forums/showt...4#post11077544
2010 2SS/RS/ Mods, Whipple, 1000cc injector, 102MM TB, Innovation West 10% OD pulley set up 8 rib, AGP twin 450 fuel system w flex on E85, CAI K&N, LT with OR Cats aka no catalytic converters, Coils and wires, 3" exhaust with mufflers, Oil catch can, 2015 ZL1 9.9 3.23 ratio, BMR upper Lower control arms, 15"conversion, BMR Anti Roll Bar 315/60/15 ET street slicks 1972 El Camino SS 565BBC 950HP, All TRZ suspension |
|
|
|
|