03-10-2009, 12:26 PM | #1 |
Motown Madman
Drives: 1991 Z28, 1997 Z28 Join Date: Dec 2008
Location: Motorcity , USA
Posts: 86
|
Need help or a way to go
Make as long story short, I cut thru my (I think ECM) wiring harness on my 1991 Z28 (5.7 TPI)inside the front fender on the passenger side.Does anyone know ( besides sodering each wire one at a time) if there is a aftermarket company or salvage yard that i can call to get one. The Chevrolet parts manual has it dicontinued.
Any help will work as to I have used up any avenues I had. Thanks |
03-18-2009, 07:43 PM | #2 |
Drives: 2000 GMC Sonoma Join Date: Mar 2009
Location: ATL, GA
Posts: 75
|
Yes you can get them, but they are not cheap. Try hawksthirdgen.org and look on ebay.
|
03-18-2009, 08:49 PM | #3 |
Right, right.
Drives: 79 Z28, 86 Camaro, 94 Burb 4x4 Join Date: Dec 2008
Location: Fond du Lac, Wisconsin
Posts: 1,350
|
try moderndaymuscle.com idk if they hav it, but i get a lot of stuff for my 86 on there, so they might.
__________________
"You wanna lay the fate of the world on the kids camaro? Thats cool."
"When reporters asked what it was, one official stated, 'It's a small, vicious animal that eats Mustangs.'" The Creampuff Fleet- |
03-20-2009, 12:32 PM | #4 |
Drives: 89 RS/99 GTP/1SS soon Join Date: May 2007
Location: Chicago/Phoenix
Posts: 238
|
Repairing it would be cheaper and less work IMO, if you dont want to solder just use butt connectors and shrink tube each wire. Easy to match up the colors.
|
|
|
|
|