12-28-2009, 06:55 PM | #1 |
Drives: Camaro RJT 2SS/RS Join Date: Aug 2009
Location: Frederick,Maryland
Posts: 271
|
Cold Air Inductions Intake... Highly Recommended
I received my Intake from "Cold Air Inductions" after much research and very helpful thread comparing all the intake systems that are available for the new 2010 Camaro SS thanks to Jannetty Racing . This one proved to provide the best overall torque and horsepower ratings in my view.
Anyway it only took 20 minutes disassemble the factory intake AND Install the new one. The fit and finish is excellent, and as far as power is concerned... Very very impressed, throttle response in much better, butt factor dyno is improved, not to mention the more aggressive sound under the hood. and now I have a to feather the throttle with TC on or off if i punch it at a roll to keep it from burning the tires off of it. My Recommendation... buy this one ... it's a good investment, for the horsepower and money. Will post photos as soon.
__________________
2010 RJT SS
Port and Polished, Milled .005 Heads Patriot Valve Springs, Titanium Retainers&locks Manley Race Valves Comp Chromoly push-rods Ported T/B DT Headers, JBA H/F Catted mid pipes Magna Flow Comp series exhaust w/ Xpipe Comp Custom grind Cam Tune and Machine work done by MPC CAI Intake Last edited by getarz4u15ster; 12-30-2009 at 06:57 AM. |
12-29-2009, 08:52 AM | #2 |
Drives: 2016 2SS Camaro, 2017 Acura Join Date: Nov 2008
Location: Maryland
Posts: 469
|
Do you have a website for them?
__________________
2016 2SS, Auto, Garnet Red, Black Interior, Magnetic Ride, Performance Exhaust, and Nav.
Past highlights: 2013 2LT/RS, 2010 pre-order Camaro 2LT,1969 Chevy Malibu, 1972 Plymouth 'Cuda, 1972 Pontiac GTO, 1979 Turbo Buick Century. 'See the USA in your Chevrolet...' Dinah Shore, 1952: http://www.youtube.com/watch?v=KGZvQoPxhNs |
12-29-2009, 09:08 AM | #3 |
Voice Of The Voiceless
|
how long did it take for you to receive it? from ordering to the front of your door, I mean. their website states that it is backordered 3 - 4 weeks
joepitt, here is their website: http://www.coldairinductions.com
__________________
Last edited by Iwantone2; 12-29-2009 at 09:21 AM. |
12-29-2009, 09:13 AM | #4 |
Go Blue!!!!!
Drives: 2012 Cruze LT Join Date: Mar 2009
Location: Indiana
Posts: 23,290
|
|
12-29-2009, 01:14 PM | #5 | |
Drives: Camaro RJT 2SS/RS Join Date: Aug 2009
Location: Frederick,Maryland
Posts: 271
|
Time.....
Quote:
__________________
2010 RJT SS
Port and Polished, Milled .005 Heads Patriot Valve Springs, Titanium Retainers&locks Manley Race Valves Comp Chromoly push-rods Ported T/B DT Headers, JBA H/F Catted mid pipes Magna Flow Comp series exhaust w/ Xpipe Comp Custom grind Cam Tune and Machine work done by MPC CAI Intake |
|
12-29-2009, 02:21 PM | #6 |
Drives: 2010 2SS Camaro Red Join Date: Jan 2009
Location: Carbonado wa,
Posts: 19
|
I got one from Jannetty Racing and it is GREAT. There web site says they have them in stock
|
12-29-2009, 02:23 PM | #7 |
DW's 2SS
|
I also have CAI and product is Awesome!
|
12-29-2009, 02:33 PM | #8 |
Voice Of The Voiceless
|
Thanks for the reply, getarz!! So Bri88blue, I'll have a check at Jannetty's site and see if any are available. If it's not...
__________________
|
12-29-2009, 03:42 PM | #9 |
Do you need to do a tune after the install or is it just a bolt on and go system.
|
|
12-29-2009, 03:43 PM | #10 |
DW's 2SS
|
|
12-30-2009, 06:40 AM | #11 |
Drives: Camaro RJT 2SS/RS Join Date: Aug 2009
Location: Frederick,Maryland
Posts: 271
|
That's Correct...
The ONLY thing i noticed when I started the car was that the ECU had to compensate for the volume of air that was passing the MAF and probably the tempreture as well. After it figured that out, it ran smooth.
And as i'm sitting here typing fedex just dropped off my Headers, XPIPE and Exhaust from Maryland speed.
__________________
2010 RJT SS
Port and Polished, Milled .005 Heads Patriot Valve Springs, Titanium Retainers&locks Manley Race Valves Comp Chromoly push-rods Ported T/B DT Headers, JBA H/F Catted mid pipes Magna Flow Comp series exhaust w/ Xpipe Comp Custom grind Cam Tune and Machine work done by MPC CAI Intake |
12-30-2009, 06:45 AM | #12 |
Drives: 18 zl1, 17 sierra denali Join Date: Sep 2009
Location: Detroit Area
Posts: 471
|
i wrote the original post about cold air inductions, and with their intake in my car for over 3 months, i've had zero problems. james' customer service has been FANTASTIC. their product is ridiculously high quality too. better than the plastic parts a lot of manufacturers are using. i also love that you can see through the plexiglass .
|
12-30-2009, 06:51 AM | #13 |
Account Suspended
|
Is it compatible with the V6?
|
12-30-2009, 06:56 AM | #14 |
Drives: Camaro RJT 2SS/RS Join Date: Aug 2009
Location: Frederick,Maryland
Posts: 271
|
look like they have one...
__________________
2010 RJT SS
Port and Polished, Milled .005 Heads Patriot Valve Springs, Titanium Retainers&locks Manley Race Valves Comp Chromoly push-rods Ported T/B DT Headers, JBA H/F Catted mid pipes Magna Flow Comp series exhaust w/ Xpipe Comp Custom grind Cam Tune and Machine work done by MPC CAI Intake |
|
|
Thread Tools | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Roto-Fab Cold Air Intake from Phastek Performance | Sean@Phastek | V8 Bolt-Ons & Tunes | 17 | 06-09-2010 12:31 PM |
LMR Cold Air Intake & Phastek Performance - now available to order Online | Sean@Phastek | Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons | 5 | 09-17-2009 02:05 PM |
Saturn Sky Red Line GMPP cold air intake question | 496BIGBLOCK | General Automotive + Other Cars Discussion | 8 | 12-29-2008 01:50 AM |
Which cold air intake should I buy? | VictoryRed08 | General Automotive + Other Cars Discussion | 8 | 12-14-2008 08:36 PM |
What Cold Air Intake should I buy? | VictoryRed08 | 5th Gen Camaro SS LS LT General Discussions | 2 | 12-14-2008 11:47 AM |