11-20-2010, 05:50 PM | #15 |
Drives: 2010 Camaro 2SS/RS Join Date: Sep 2009
Location: Down South
Posts: 1,497
|
I have run 12.0 all motor and 10.9 on a 200 shot of nitrous in the Camaro SS and 13.3 in the Silverado 400 SS.
If you have any more questions or if I can help in any way let me know.
__________________
2005 Dodge Ram 2500 RCSB Thunder Road Hemi Sport w/STS Turbo
2004 Dodge Ram SRT-10 - Silver - Stock 2003 Chevy 1500 RCSB Stepside 400SS - 408 in now awaiting Turbo |
11-20-2010, 06:43 PM | #16 |
Drives: 2010 Camaro 1ss IOM Join Date: May 2009
Location: Williamsport,PA
Posts: 2,246
|
Gary at Garys Customs give him a call or pm him he has this done!!!!!!
__________________
Jannetty Racing Built and Tuned
416 Maggie Max Package even better now! |
11-20-2010, 07:18 PM | #17 |
Drives: 2010 2SS/RS Join Date: May 2010
Location: USA
Posts: 592
|
Freight costs to California. Kills that deal.
__________________
LME built LSX427 w/t all Callies internals| AGP 65/65 TT | Holley Sniper Intake | Brodix BR3/LME custom ported | LME custom cam | Pro EFI 112 ECU | ID-1700x | NGK BR7EF | AGP's-Fore Triple Fuel pump | Monster LT1-S Triple | ZL1 3.23 diff, CF driveshaft, ZL1 axles | Hurst Line Lock | MGW Retro Short Throw | Pfadt solid subframe mounts | Prothane Motor Mounts | Revshift Poly Trans insert | Ground Control camber/caster plates | Accelerated Racing Solutions tuned| God is too good! I don't deserve it, but I sure will accept it!!! |
01-27-2011, 09:12 AM | #18 |
NEMESIS (NEMI-"SS")
Drives: 2011 2SS-LS3, BLACK W/CYBER STRIPES Join Date: Nov 2010
Location: SAN DIEGO
Posts: 144
|
SRT10KLLR,
Wow how time flies.... First off thanks for all the guidance above! But now it is time to get the wheels widened. I am getting an extra set of rears done next week @ Vaughn's and just wanted to dbl check with you that if I get them (factory rears) widened to 10.5 and run a 315 tire I should not have any problems or have to use spacers for everyday running around, correct?. I have no intention of lowering tire pressure, just looking for that fat rear tire look. Thanks in Advance...
__________________
1969 RS/SS Lemans Blue 396-350HP Convertible - Orig. Owner and 2011 RS/SS Black/Black Coupe - PFADT Stage-II, CAI, Richmond 4:33's, Barton Flat Stick-Short Throw, KOOK's ceramic LT's, Comp Stage II Cam, QuickTime cut-outs, Ryne Cunningham Custom Tune, Flowmaster, Heritage Grille, Eric Vaughn "widened" wheels w/ 315 Dunlops, MPD1 R.Spoiler & Dave Kahn "Buried" Cyber Grey Metallic Stripes.... 593HP / 517RWHP.
[SIGPIC][/SIGPIC] |
01-31-2011, 10:10 AM | #19 | |
Drives: 2010 Camaro 2SS/RS Join Date: Sep 2009
Location: Down South
Posts: 1,497
|
Quote:
I can say that the 10.75" with 305 Nitto NT555R had no rubbing. The same wheel with the 315 Nitto NT05R had some ever so slight rub on only one side. I was not sure though if it was caused by the retainer holding the plastic liner that came loose causing the liner to flap around in the wind while driving or if the rubbing knocked the retainer off. Given that info I would say to be certain use a 10.50" wheel and it should not rub since it gives it that extra margin. No spacers or adapters would be needed if going to the 10.50" wheel also. What tires are you going to be running? Don't forget to swing by after you pick them up and slap them on.
__________________
2005 Dodge Ram 2500 RCSB Thunder Road Hemi Sport w/STS Turbo
2004 Dodge Ram SRT-10 - Silver - Stock 2003 Chevy 1500 RCSB Stepside 400SS - 408 in now awaiting Turbo |
|
03-08-2011, 09:09 AM | #20 |
NEMESIS (NEMI-"SS")
Drives: 2011 2SS-LS3, BLACK W/CYBER STRIPES Join Date: Nov 2010
Location: SAN DIEGO
Posts: 144
|
VAUGHN MACHINE WIDENED WHEELS - DONE!
SRT10KLLR,
Got them done... here is the trilogy; - Vaughn Machine widedned to 10.750 Perfect! - 10.750 is to wide to run w/out a spacer, not perfect - Bought an H&R 20MM spacer - Set the wheel right on the inside edge of the car Perfect! - Had to trim .300 off of original lug nuts for wheel cavity clearance ( I am running the stock SS wheel only widened) - no problem with lug clearance - perfect! - 315 Dulop Tire - Looks Sick! * Moral to the story... It takes work to get a 315 to fit and look good at the edge and clear on the inside, but in the end it looks wicked from behind! I'll have pics up by the end of the week.
__________________
1969 RS/SS Lemans Blue 396-350HP Convertible - Orig. Owner and 2011 RS/SS Black/Black Coupe - PFADT Stage-II, CAI, Richmond 4:33's, Barton Flat Stick-Short Throw, KOOK's ceramic LT's, Comp Stage II Cam, QuickTime cut-outs, Ryne Cunningham Custom Tune, Flowmaster, Heritage Grille, Eric Vaughn "widened" wheels w/ 315 Dunlops, MPD1 R.Spoiler & Dave Kahn "Buried" Cyber Grey Metallic Stripes.... 593HP / 517RWHP.
[SIGPIC][/SIGPIC] |
03-08-2011, 09:21 AM | #21 |
Drives: 2010 2SS/RS ; 1970 Firebird Formula Join Date: Jan 2010
Location: West Palm Beach
Posts: 1,252
|
|
03-08-2011, 01:26 PM | #22 |
***GO HOGS GO***
Drives: 68/327 & 10 2SS SIM w/ CGM Stripes Join Date: Jun 2010
Location: NW Arkansas
Posts: 1,796
|
The widened SS wheels look sick. Put mine on last weekend, moved back wheels to front and had fronts widened to 10.8 with 305/35's.....they look awesome.
__________________
ProCharger F1A, ID1000 Injectors, SW Headers, SW full 3" Exhaust, BMR Suspension, CCW 10"/11.5", DBA Rotors, 3.91's, 560/570 hp/tq
ProCharger F1A, VMax TB, ID1000 Injectors, SW Headers, SW full 3" Exhaust, BMR Suspension & 4 Point Strut Tower Brace, 3.91 Gears, DBA Rotors Heritage Grille, CCW SP16a Wheels 10"/11.5" Nitto 275/40 315/35, Painted Calipers, Blackout: Bowtie, Rear Panel, Markers & Side Vents, SS Fender Badges, 6.2L Cowl Lettering, Pistol Grip Shifter, RPI SS Door Kick Plates, Billet Cup Holder, Fesler Shift Boot, Lloyd Floor Mats..(1/4: 12.917 @ 109.63) |
03-08-2011, 11:25 PM | #23 | |
Drives: 2010 Camaro 2SS/RS Join Date: Sep 2009
Location: Down South
Posts: 1,497
|
Quote:
__________________
2005 Dodge Ram 2500 RCSB Thunder Road Hemi Sport w/STS Turbo
2004 Dodge Ram SRT-10 - Silver - Stock 2003 Chevy 1500 RCSB Stepside 400SS - 408 in now awaiting Turbo |
|
03-09-2011, 05:07 AM | #24 |
Drives: Anything I want Join Date: Oct 2008
Location: DfW - Texas
Posts: 5,405
|
Hubcentric spacers always in stock, specific for the 2010-2012 Camaro.
Do your self a favor and widen your front wheels to 10.9-11.00 for proper fit on the rear. We have done more than 20 sets this way with no issues. |
03-10-2011, 10:08 AM | #25 |
NEMESIS (NEMI-"SS")
Drives: 2011 2SS-LS3, BLACK W/CYBER STRIPES Join Date: Nov 2010
Location: SAN DIEGO
Posts: 144
|
Original Rears Widened...
ADM,
I wanted to keep the deeper dish of the rear in the back ( I can tell the diff from 20ft).. I also wanted a 'just inside the wheel well look" as well. In the end Vaughn did great work on the wheels, the spacers worked out great. Installed the original rears to the front (no spacers). For me I was after more of a "Hot Rod" look than road course look. Fat in the back and not so fat in the front. All in all it was more work using the original rears but worth it.
__________________
1969 RS/SS Lemans Blue 396-350HP Convertible - Orig. Owner and 2011 RS/SS Black/Black Coupe - PFADT Stage-II, CAI, Richmond 4:33's, Barton Flat Stick-Short Throw, KOOK's ceramic LT's, Comp Stage II Cam, QuickTime cut-outs, Ryne Cunningham Custom Tune, Flowmaster, Heritage Grille, Eric Vaughn "widened" wheels w/ 315 Dunlops, MPD1 R.Spoiler & Dave Kahn "Buried" Cyber Grey Metallic Stripes.... 593HP / 517RWHP.
[SIGPIC][/SIGPIC] |
03-10-2011, 11:34 AM | #26 |
Troy
|
I want Vaughn to widen some rears to 10.5" for me too, but I need them chromed afterward.
Anyone know where I should go to get this done? |
03-10-2011, 11:41 AM | #27 |
Drives: 2010 RY 2SS with Custom Stripes Join Date: Mar 2009
Location: Jennings, La.
Posts: 2,220
|
|
03-10-2011, 04:50 PM | #28 |
Troy
|
|
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
18" Factory OEM Wheels Rims for Sale | K-Dub | Wheels and Tires Talk Sponsored by The Tire Rack | 2 | 11-24-2010 10:03 AM |
Wanted to buy: 20" OEM Factory Chromed wheels | prostock69 | Wheels / Tires | 13 | 07-28-2010 12:07 PM |
SLP 2010 Camaro ZL575 supercharged -- unique aero parts & "SS" on grill | nUcLeArEnVoY | Camaro Photos | Spyshots | Video | Media Gallery | 129 | 04-22-2010 02:59 PM |
Why use premium gas? | avro206 | Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons | 81 | 01-11-2010 02:38 PM |
Factory Chrome Wheels Available - 20x8 & 20x9 Group Buy | talwell | Wheels / Tires | 1 | 12-18-2009 02:40 PM |