APR CARBON FIBER SPLITTER. - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

The 2010 Sin · 04-11-2010, 09:23 PM

SOLD!! :-)

I will sell it for $250+ actual shipping to your location.

I decided i want to do the whole hennessey carbon aero kit.

Sweet looking setup and I have the post to mount.

Theres not any visible scratches on the panel and never has been dragged underneath.

Here's a couple pix:

The 2010 Sin · 04-12-2010, 11:12 AM

ttt

Mod007 · 04-13-2010, 04:08 AM

PM sent, can you please post a side picture?

The 2010 Sin · 04-13-2010, 02:39 PM

I never took a side picture of the car with it on! :-( it looks amazing all the way around though the panel goes back under the car about a foot and is finished nicely to exactly the end of the front fascia not to impede the wheel wells looks really nice on.

Zach

PS. I never got your PM.

boro62 · 04-19-2010, 04:47 AM

just curious but where do u mount the rod posts things? Is the splitter stable without them?

The 2010 Sin · 04-20-2010, 11:22 AM

yes the rods only attached to the aftermarket grille you saw in the SFXperformance pictures i mean a couple bumps and the grille would go bye bye too.

So you would have to buy the Trex upper and lower mesh grille at $450 for it to work with big nasty washers behind it mashing down on the grille... Pretty Ghetto. This Center bushing worked well for me and stayed rigid. Never had the chance to have it at real high speeds but it held great running my errands around town. All it takes is a 1/4 inch hole in the urethane bumber underneath. and when it is removed a GM tree plug fits nicely to cover that hole ( not that you can see it at all without being under the car, just piece of mind really.)

The 2010 Sin · 04-20-2010, 11:23 AM

The rods they send from APR are too short to work without a flush grill mount setup. you cant attach behind the grille or to the factory grille without it rubbing the paint off of the lower bumper. Not to mention the bolts and nuts to attach the back of this piece are sent too short from APR directly. I ended up buying a nice set of bolts and washers to hold it together.

Camaroking1996 · 09-22-2010, 05:46 PM

can u pm me a couple of side shots of that

FINALLYSATISFIED · 09-22-2010, 06:06 PM

Quote:

Originally Posted by Camaroking1996

can u pm me a couple of side shots of that

Its sold already..

04-11-2010, 09:23 PM	#1
The 2010 Sin Dont H8 Me Cuz U Aint Me Drives: 2016 SS Sedan, 2017 Explorer Sport Join Date: Feb 2010 Location: Tulsa, Oklahoma Posts: 2,910	APR CARBON FIBER SPLITTER. SOLD!! :-) I will sell it for $250+ actual shipping to your location. I decided i want to do the whole hennessey carbon aero kit. Sweet looking setup and I have the post to mount. Theres not any visible scratches on the panel and never has been dragged underneath. Here's a couple pix: Attached Images __________________ Last edited by The 2010 Sin; 04-16-2010 at 01:53 AM.

04-12-2010, 11:12 AM	#2
The 2010 Sin Dont H8 Me Cuz U Aint Me Drives: 2016 SS Sedan, 2017 Explorer Sport Join Date: Feb 2010 Location: Tulsa, Oklahoma Posts: 2,910	ttt __________________

04-13-2010, 04:08 AM	#3
Mod007 Drives: Camaro SS/RS Join Date: May 2009 Location: Austin TX, Posts: 475	PM sent, can you please post a side picture? __________________ Camaro SS/RS Corsa Catback

04-13-2010, 02:39 PM	#4
The 2010 Sin Dont H8 Me Cuz U Aint Me Drives: 2016 SS Sedan, 2017 Explorer Sport Join Date: Feb 2010 Location: Tulsa, Oklahoma Posts: 2,910	I never took a side picture of the car with it on! :-( it looks amazing all the way around though the panel goes back under the car about a foot and is finished nicely to exactly the end of the front fascia not to impede the wheel wells looks really nice on. Zach PS. I never got your PM. __________________

04-20-2010, 11:22 AM	#6
The 2010 Sin Dont H8 Me Cuz U Aint Me Drives: 2016 SS Sedan, 2017 Explorer Sport Join Date: Feb 2010 Location: Tulsa, Oklahoma Posts: 2,910	yes the rods only attached to the aftermarket grille you saw in the SFXperformance pictures i mean a couple bumps and the grille would go bye bye too. So you would have to buy the Trex upper and lower mesh grille at $450 for it to work with big nasty washers behind it mashing down on the grille... Pretty Ghetto. This Center bushing worked well for me and stayed rigid. Never had the chance to have it at real high speeds but it held great running my errands around town. All it takes is a 1/4 inch hole in the urethane bumber underneath. and when it is removed a GM tree plug fits nicely to cover that hole ( not that you can see it at all without being under the car, just piece of mind really.) __________________

04-19-2010, 04:47 AM	#5
boro62 Drives: 2010 CGM 2SS Join Date: Jul 2009 Location: so cal Posts: 70	just curious but where do u mount the rod posts things? Is the splitter stable without them?

04-20-2010, 11:23 AM	#7
The 2010 Sin Dont H8 Me Cuz U Aint Me Drives: 2016 SS Sedan, 2017 Explorer Sport Join Date: Feb 2010 Location: Tulsa, Oklahoma Posts: 2,910	The rods they send from APR are too short to work without a flush grill mount setup. you cant attach behind the grille or to the factory grille without it rubbing the paint off of the lower bumper. Not to mention the bolts and nuts to attach the back of this piece are sent too short from APR directly. I ended up buying a nice set of bolts and washers to hold it together. __________________

09-22-2010, 05:46 PM	#8
Camaroking1996 Drives: none Join Date: Apr 2010 Location: Florida Posts: 7	can u pm me a couple of side shots of that

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
APR Carbon Fiber Front Chin Splitter SALE	IPS Brandon	Exterior Parts & Accessories	9	06-10-2010 11:41 AM
Carbon Fiber Hydrocoated, Street Scene Front Splitter... Emblempros.com	dragonZ28	Cosmetics and Lighting Modification Discussions	4	03-30-2010 05:11 PM
Carbon Fiber Cowl Hood, Trunk, and more! PHASTEK Peformance	Sean@Phastek	Exterior Parts & Accessories	3	01-29-2010 02:44 PM
Carbon Fiber splitter now available	Bewenched	Exterior Parts & Accessories	7	11-10-2009 05:42 PM