Dynamat - Page 2 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

The Stig · 04-11-2011, 10:14 PM

100 sq feet is a LOT. You could probably do the whole car with that.

Edscapade · 04-11-2011, 10:24 PM

Thanks guys!!! It is only $150 for 100 Sq Ft on ebay - so not to much.

2010SSRSM6 · 04-12-2011, 01:27 PM

You can also check prices out on Amazon. I got the bulk pack and had more then enough to do my doors and trunk.

bee sting · 04-12-2011, 01:46 PM

Quote:

Originally Posted by 2010SSRSM6

You can also check prices out on Amazon. I got the bulk pack and had more then enough to do my doors and trunk.

What bulk pack did you buy and how much.was it ?

Agent WD-40 · 04-12-2011, 05:25 PM

Quote:

Originally Posted by bee sting

What bulk pack did you buy and how much.was it ?

This is what you want. A few of my friends have snagged this deal.

http://www.amazon.com/Dynamat-10455-...2647038&sr=8-1

Topdown · 04-12-2011, 06:32 PM

I got 50' (I am pretty sure its just 50') of rattle-trap, 80mil (.080) thick, aluminum back, butyl adhesive... tough to beat that thickness/weight to cost ratio.

here is 100' of rattle-trap for 133.00

either one should work very well... since I dont cover 100% of everything, I went with the heavier/thicker deadener

Icefsh · 04-12-2011, 07:20 PM

Thanks for all the information everyone. Just recieved my bulk pack of dynamat from amazon today. Was surprised at how heavy it was. Must wiegh close to 40 pounds. Will install before summer.

1FAST SS · 04-12-2011, 07:40 PM

I used one bulk pack on my trunk alone. Should be able to get both doors and below rear windows with one more bulk pack.

yellowlightning2009 · 04-12-2011, 08:00 PM

how much you guys pay for dynamat its crazy priced here

Edscapade · 04-12-2011, 08:34 PM

Thanks Topdown!!! Always good to get the good stuff and save a little money.

Best,
Ed

04-11-2011, 10:14 PM	#15
The Stig knows 2 facts about ducks Drives: ...and they're both wrong Join Date: Aug 2009 Location: The HMS Invincible Posts: 25,072 View My Garage	100 sq feet is a LOT. You could probably do the whole car with that. __________________

04-12-2011, 01:27 PM	#17
2010SSRSM6 Drives: My wife crazy with my C5 usage. Join Date: Apr 2009 Location: DFW Posts: 6,558 View My Garage	You can also check prices out on Amazon. I got the bulk pack and had more then enough to do my doors and trunk. __________________ UNDER CONSTRUCTION......again......

04-12-2011, 06:32 PM	#20
Topdown The wait is over! Drives: 2010 Camaro, IOM, L99, Auto Join Date: Mar 2010 Location: Washington Posts: 1,081	I got 50' (I am pretty sure its just 50') of rattle-trap, 80mil (.080) thick, aluminum back, butyl adhesive... tough to beat that thickness/weight to cost ratio. here is 100' of rattle-trap for 133.00 either one should work very well... since I dont cover 100% of everything, I went with the heavier/thicker deadener __________________ Ordered - 4/17/2010 Delivered - 5/29/2010 AlphaDamp CLD Mat - Get more Sound Deadening with less Sound Deadener

04-12-2011, 07:40 PM	#22
1FAST SS Drives: 2011 Camaro SS Join Date: Nov 2010 Location: Greeley, CO Posts: 769	I used one bulk pack on my trunk alone. Should be able to get both doors and below rear windows with one more bulk pack. __________________ 2011 Camaro SS Synergy Green CAI Cold Air Induction, ADM Race Scoop, Apex Washer Bottle Kit, Vengeance Racing Kaotic Cam, DOD/VVT delete and LS3 conversion, American Racing LT Headers, American Racing Headers Off Road pipes, Borla S-Type Catback, FTI Billet Triple Disk 3600 rpm Torque Converter, DSS Aluminium Drive Shaft, AAC Plasma DRL's, Showstopper LED Sidemarkers,Carbon FIber Bow Ties, 35% Window Tint, Llyod's Floor Mats, JBL MS-8 Sound Processor, 2 Alpine PDX-1.600, Alpine PDX-4.100, JL Audio C5-650, JL Audio C5-650x, Alpine T10 Type R Shallow Mount, Stinger Dry Cell Battery

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Dynamat and other sound heat and vib mats: Compare	2ndgenz28	Camaro DIY & HOW-TO instructions & discussions	40	07-30-2011 11:53 PM
Dynamat Alternative??	skysharker1	Audio, Video, Bluetooth, Navigation, Radar, Electronics Forum	9	08-28-2010 08:04 AM
Anyone Dynamat the trunk to reduce exhaust drone?	Russell James	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	21	07-26-2010 08:36 PM
Anyone Dynamat a 1st gen?	RedDragon	1st & 2nd Generation Camaros	3	06-28-2010 06:51 AM
dynamat rear deck?	spectrepig	Audio, Video, Bluetooth, Navigation, Radar, Electronics Forum	11	01-03-2010 10:33 PM

04-11-2011, 10:24 PM	#16
Edscapade Edscapade Drives: 2011 SS Camaro Join Date: Jul 2010 Location: Pocatello Idaho Posts: 442	Thanks guys!!! It is only $150 for 100 Sq Ft on ebay - so not to much.

04-12-2011, 07:20 PM	#21
Icefsh Drives: CGM 2LT/RS M6 Join Date: Jul 2009 Location: Littleton, CO. Posts: 195	Thanks for all the information everyone. Just recieved my bulk pack of dynamat from amazon today. Was surprised at how heavy it was. Must wiegh close to 40 pounds. Will install before summer.

04-12-2011, 08:00 PM	#23
yellowlightning2009 Drives: 2010 Camaro LS Join Date: Jan 2011 Location: Newfoundland Canada Posts: 114	how much you guys pay for dynamat its crazy priced here

04-12-2011, 08:34 PM	#24
Edscapade Edscapade Drives: 2011 SS Camaro Join Date: Jul 2010 Location: Pocatello Idaho Posts: 442	Thanks Topdown!!! Always good to get the good stuff and save a little money. Best, Ed