[COTW 6/13/11]: My yellow 2010 2SS - Page 2 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

jlugo · 06-02-2011, 10:53 PM

Quote:

Originally Posted by zslewis

The only way to do it is with a vinyl, and not to thrilled with that... So I am going to paint the roof black to complete it... I think it will suffice...

Here's another option, check out this link:
"Carbon Fiber Fabrics"
http://www.uscomposites.com/carbonpage.html

__________________________________________________ _________________________

zslewis · 06-03-2011, 01:42 AM

So today was a productive day. I went to a local paint shop and got a quote for the paint job, although a little more than I was hoping for still a decent price. Gonna run me 2500 for the paint job. Went to the dealership to get replacement wiper blades of course they didnt have any there so I will have to go back tomorrow. Then my curiosity kicked in...

I have been wanting to get my twin turbo system for a while now just havent had the money for it. About 2 weeks ago I set a date for myself, will have twin turbo in by Oct. Well that is becoming more of a reality after today...

Over the past week I have been talking to MTI Racing personnel in Marietta GA, and they gave me a quote for the system, install cost, and the tune... Was about what I expecting price wise, so I used that as a base line to go off of... Went to my bank and asked if it would be possible to get a loan for said amount and it was approved right away... So once I get my speakers done and paint job done, twin turbo is next. But I also need to get my headers too, still trying to figure out how to do this... by the time all is done I will have spent close to 20k this summer alone... once all is said and done it will be time to start paying off some of this debt... Good thing I got promoted and my pay kicks in next month...

As for this weekend I plan on getting my footwell lights wired up and my Trunk Lid panel mounted and wired up. Pics will follow when that work is done...

Roto-fab 1 · 06-03-2011, 07:45 AM

Thanks for taking the time to get the engine bay pics-they look great!

pyr0b0y · 06-03-2011, 11:43 AM

nice build. I have a CF hood as well and am still waiting on the Seibon ST trunk. I was debating on what to do with the engine bay, but really like the engine covers and CF accents!

Overflow · 06-03-2011, 05:39 PM

Nice!

zslewis · 06-03-2011, 09:16 PM

Just ordered Kooks 1 7/8" LT headers /w cats today from Maryland Speed cant wait to see how much of a beast its going to sound like with the Borla ATAK exhaust...

camaro2lt · 06-04-2011, 11:37 AM

i am buying a carbon fiber trunk lid is it hard to install?

thanks

zslewis · 06-04-2011, 12:56 PM

Quote:

Originally Posted by camaro2lt

i am buying a carbon fiber trunk lid is it hard to install?

thanks

Nope did it by myself... the only thing with it was that I had to go buy some washers and lock washers from home depot... thats it

thespymaster · 06-05-2011, 09:07 AM

Just caught your tag...............Priceless

The AAC lights really look good!

zslewis · 06-05-2011, 12:47 PM

That is one of my buddies tags that he used to have on one of his Talon's. But he kept the plate for obvious reasons... Its just hilarious...

zslewis · 06-06-2011, 07:00 PM

T3 front bumper and splitter shipped from Phastek today... Which means I should get it before I go to throw my car to be painted... Already have the SLP delete for the mail box slot, talked to a body shop and they said that they will make it look like its all one piece so it wont have the cracks from where the SLP delete is...

zslewis · 06-07-2011, 09:03 PM

So I dropped off my car today to get the stereo put in... So I am without the Camaro for a week... Instead I am driving my beater... 93 Honda Del Sol...

edgar3 · 06-07-2011, 09:44 PM

nicely done...

zslewis · 06-10-2011, 01:21 AM

Well so far they have the stereo in and they were almost done with one of the fiberglass boxes... Here is a pic of the stereo...

06-03-2011, 01:42 AM	#16
zslewis Drives: 2010 TT Camaro SS Join Date: Mar 2011 Location: Augusta GA Posts: 268	So today was a productive day. I went to a local paint shop and got a quote for the paint job, although a little more than I was hoping for still a decent price. Gonna run me 2500 for the paint job. Went to the dealership to get replacement wiper blades of course they didnt have any there so I will have to go back tomorrow. Then my curiosity kicked in... I have been wanting to get my twin turbo system for a while now just havent had the money for it. About 2 weeks ago I set a date for myself, will have twin turbo in by Oct. Well that is becoming more of a reality after today... Over the past week I have been talking to MTI Racing personnel in Marietta GA, and they gave me a quote for the system, install cost, and the tune... Was about what I expecting price wise, so I used that as a base line to go off of... Went to my bank and asked if it would be possible to get a loan for said amount and it was approved right away... So once I get my speakers done and paint job done, twin turbo is next. But I also need to get my headers too, still trying to figure out how to do this... by the time all is done I will have spent close to 20k this summer alone... once all is said and done it will be time to start paying off some of this debt... Good thing I got promoted and my pay kicks in next month... As for this weekend I plan on getting my footwell lights wired up and my Trunk Lid panel mounted and wired up. Pics will follow when that work is done... __________________ 2010 Twin Turbo Camaro SS RWHP: TBD TQ: TBD Zach

06-03-2011, 11:43 AM	#18
pyr0b0y need....more....hp Drives: The Neighbor Hater Join Date: Dec 2010 Location: San Mateo, CA Posts: 4,091	nice build. I have a CF hood as well and am still waiting on the Seibon ST trunk. I was debating on what to do with the engine bay, but really like the engine covers and CF accents! __________________ BUILD THREAD BUILT AND MAINTAINED BY BLU808 Mast Motorsports Built LS3 Stroker 418, IPS GT35R Twin Turbos, Exedy GTO4XD Twin Disc Clutch, Aeromotive A1000 Eliminator Stealth Fuel Pump, AEM Meth Injection, DSS 1400hp Axels, BC Coilovers, Pfadt & BMR Suspension, Hawk HPS Pads, Drilled/Slotted Rotors, Hurst Shifter, Custom Roll Cage by Blu808, T3 Ports, 22" Custom Concave Mesh Rims

06-03-2011, 05:39 PM	#19
Overflow Space Shuttle Aficionado Drives: 2016 Camaro 2SS Join Date: Jun 2010 Location: Tampa, FL Posts: 30,899 View My Garage	Nice! __________________

06-03-2011, 09:16 PM	#20
zslewis Drives: 2010 TT Camaro SS Join Date: Mar 2011 Location: Augusta GA Posts: 268	Headers Just ordered Kooks 1 7/8" LT headers /w cats today from Maryland Speed cant wait to see how much of a beast its going to sound like with the Borla ATAK exhaust... __________________ 2010 Twin Turbo Camaro SS RWHP: TBD TQ: TBD Zach

06-04-2011, 11:37 AM	#21
camaro2lt Drives: 2010 Camaro 2LT VR/RS CGM Rally's Join Date: May 2009 Location: Palmyra, PA Posts: 5,675 View My Garage	i am buying a carbon fiber trunk lid is it hard to install? thanks __________________ Email: rdurso1@yahoo.com

06-03-2011, 07:45 AM	#17
Roto-fab 1 Drives: 16 Camaro SS w/ Roto-fab CAI Join Date: May 2009 Location: Arizona Posts: 2,682	Thanks for taking the time to get the engine bay pics-they look great!

06-05-2011, 09:07 AM	#23
thespymaster Drives: C7 / ZL1 / SS / trucsk Join Date: Nov 2009 Location: G4 CLASSIFIED Posts: 4,533 View My Garage	Just caught your tag...............Priceless The AAC lights really look good! __________________ 2014 C7 Stingray 3LT/Z51 2013 Camaro SS 2012 Camaro ZL1 - 850 HP 2015 GMC Denali 3500HD 4x4 2012 GMC Sierra 3500HD 4x4

06-05-2011, 12:47 PM	#24
zslewis Drives: 2010 TT Camaro SS Join Date: Mar 2011 Location: Augusta GA Posts: 268	That is one of my buddies tags that he used to have on one of his Talon's. But he kept the plate for obvious reasons... Its just hilarious... __________________ 2010 Twin Turbo Camaro SS RWHP: TBD TQ: TBD Zach

06-06-2011, 07:00 PM	#25
zslewis Drives: 2010 TT Camaro SS Join Date: Mar 2011 Location: Augusta GA Posts: 268	T3 front bumper and splitter shipped from Phastek today... Which means I should get it before I go to throw my car to be painted... Already have the SLP delete for the mail box slot, talked to a body shop and they said that they will make it look like its all one piece so it wont have the cracks from where the SLP delete is... __________________ 2010 Twin Turbo Camaro SS RWHP: TBD TQ: TBD Zach

06-07-2011, 09:03 PM	#26
zslewis Drives: 2010 TT Camaro SS Join Date: Mar 2011 Location: Augusta GA Posts: 268	So I dropped off my car today to get the stereo put in... So I am without the Camaro for a week... Instead I am driving my beater... 93 Honda Del Sol... __________________ 2010 Twin Turbo Camaro SS RWHP: TBD TQ: TBD Zach

06-07-2011, 09:44 PM	#27
edgar3 Drives: 2010 2SS Join Date: May 2011 Location: upper deerfield, nj Posts: 419 View My Garage	nicely done... __________________ XSPower Longtube + Catback "Engine to Tip" polished steel VMAX ported Throttle Body 160 degree thermostat Street Tune East Coast Supercharging Cold Air Inductions TRex Phantom Black Billet Grill. Upper and lower Custom Badging Lloyd Floors mats splash guards Underhood Engine bay done AAC LED mailslot strip lights Flowing Cheese Fondue waterfall in console Various food items to dip into warm cheese

06-10-2011, 01:21 AM	#28
zslewis Drives: 2010 TT Camaro SS Join Date: Mar 2011 Location: Augusta GA Posts: 268	Well so far they have the stereo in and they were almost done with one of the fiberglass boxes... Here is a pic of the stereo... __________________ 2010 Twin Turbo Camaro SS RWHP: TBD TQ: TBD Zach

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
CAMARO WIKI	Tran	Wiki	65	12-14-2022 07:23 AM
F/S Supercharged Yellow 2010 2SS Camaro(L99)	wheels5	Local Marketplace	23	02-23-2011 12:22 PM
2010 YELLOW 2SS RS	JoeMClassic	Dealer Camaros for Sale	0	11-16-2009 03:13 PM