08-21-2015, 01:17 PM | #1 |
Drives: '02 Trailblazer, '12 Camaro 2SS/RS Join Date: Jun 2012
Location: AK
Posts: 819
|
Door panel insert question
this is in the DIY area but i think there might be more traffic here. Anyone know if these will accept the factory door panel lighting? http://www.classicindustries.com/sho.../dash-inserts/
On sale to Sunday so if they do I'll snatch them up. Unless someone has a source to them cheaper. I'll be painting them myself so color doesn't matter.
__________________
|
08-21-2015, 01:42 PM | #2 |
H-Town Camaro Club
Drives: 2013 Dusk Edition 2SS/M6/Sun/NPP Join Date: May 2014
Location: Houston
Posts: 2,234
|
$600?! holy bat cakes robin! just....wow
Call the distributor is my suggestion |
08-21-2015, 04:38 PM | #3 |
Drives: '02 Trailblazer, '12 Camaro 2SS/RS Join Date: Jun 2012
Location: AK
Posts: 819
|
yup, spindy. Anyone know of other options?!?!
Called them already. They didn't know either. When i told them it was a factory option they assumed it was a safety feature and would be there! I had to explain what it was but clearly they have no idea. My understanding is that all the door panels themselves are the same. The only difference being if the actual tube and lighting is there. I think all the panel have the clips to hold the LED tube.
__________________
|
08-21-2015, 05:18 PM | #4 |
Drives: 2014 Camaro 1LT/RS Join Date: Dec 2014
Location: Central Florida
Posts: 122
|
RPI has them for about $439 before any coupons. I'm considering the carbon fiber door and dash inserts. The $439 price is for door inserts and the dash, it's less for just the doors inserts.
|
08-21-2015, 08:36 PM | #5 | |
Drives: '02 Trailblazer, '12 Camaro 2SS/RS Join Date: Jun 2012
Location: AK
Posts: 819
|
Quote:
Just looked at the RPI but it specifically says for non ABL cars (no lighting in the doors). Mine has the lighting. The major questions is, do all the panels have the brackets for the lighting if I have the lighting tubes and lighting already?
__________________
Last edited by IPT; 08-21-2015 at 08:55 PM. |
|
08-23-2015, 01:28 PM | #6 |
KNGTFALL
Drives: 2012 2SS 45th edition Join Date: Aug 2012
Location: (Near) Charlotte, NC
Posts: 1,533
|
Call them and tell them to take a picture of the back and send it to you.
But if you are going to paint them yourself a different color from the 4 types shown. I would try to find a cheaper route. are you painting from the back side? RPI has the ones for ABL but they paint the front IIRC and the line for the ABL looks like junk. At least it does in their website pics. http://www.rpidesigns.com/shop/item.aspx?itemid=2084 They say they are GM inserts, so I would try to buy unpainted ones from them and strip the paint off the back and paint it with your color of choice. Or do a vinyl wrap in the color of choice and save alot of cash. GM Part #s can be found on the flyer in this thread. very top of the flyer in post 4 http://www.camaro5.com/forums/showth...&highlight=ABL But i'm not sure if they sell them anymore |
08-23-2015, 01:37 PM | #7 |
KNGTFALL
Drives: 2012 2SS 45th edition Join Date: Aug 2012
Location: (Near) Charlotte, NC
Posts: 1,533
|
|
08-24-2015, 02:14 PM | #8 |
Drives: '02 Trailblazer, '12 Camaro 2SS/RS Join Date: Jun 2012
Location: AK
Posts: 819
|
dude, that looks sweet. Thanks for the links and info!
__________________
|
08-24-2015, 08:45 PM | #9 |
Drives: 2015 Manual Hot Red 2LS Camaro Join Date: May 2015
Location: Orlando, FL
Posts: 269
|
Looks awesome!! I want to try covering mine with the same leather interior as my seats..
__________________
|
08-25-2015, 04:51 AM | #10 | |
Drives: 2011 2SS/RS CGM Join Date: Dec 2012
Location: Fort Worth, TX
Posts: 84
|
Quote:
Your panels look great! Did you use an adhesive of any kind to help adhere? I would like to try this mod again, but I need something to keep it from bubbling up again. It easily gets 150+ degrees inside cars here in the middle of summer.
__________________
Too many mods... Or perhaps not enough. Just one more.
|
|
08-25-2015, 07:22 PM | #11 |
KNGTFALL
Drives: 2012 2SS 45th edition Join Date: Aug 2012
Location: (Near) Charlotte, NC
Posts: 1,533
|
It gets pretty hot here too. I just brought it to a vinyl graphics wrap place here in Charlotte. Its been on since april
They printed it and installed it, no adhesive other than what came on the wrap. Chris at Vengeance graphix did the design |
08-30-2015, 08:41 AM | #12 | |
Drives: 2020 GMC Sierra AT4 Join Date: Jul 2013
Location: Hanover, PA
Posts: 3,278
|
Quote:
To answer your question the GM accessory kits do accept the factory ABL set up just with the non Silver kits it may alter the lighting color a little.
__________________
2023 Camaro 2SS 1LE Summit White
1100 - 3/23/2023 2000 - 3/27/2023 3000 - 3/28/2023 3400 - 4/12/2023 — 4/24 TPW 3800 - 4/28/2023 5000 - 5/30/2023 6000 - 6/03/2023 2020 GMC Sierra AT4 6.2L Black |
|
|
|
|
|