3600 installed - Page 2 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

sasquash1984 · 09-21-2013, 10:49 PM

Quote:

Originally Posted by Camarojt

U are running his old cam right?

Well not his cam I had my lpe gt-11 in before he did his

Camarojt · 09-22-2013, 07:09 AM

Quote:

Originally Posted by white 2SS/RS

His car is the same setup as mine was, only his heads were milled (should be worth a few hp) and he's about 100lbs lighter than I am.
Car should be good for an 11.4x in GREAT air.

Quote:

Originally Posted by sasquash1984

Well not his cam I had my lpe gt-11 in before he did his

I agree 100% with that. Dan I believe you had 11.50 in yours with some weight out so his may go 11.30-11.40's in negative DA.

I was meaning the same cam that Dan was running. Lol

sasquash1984 · 09-22-2013, 07:53 AM

Quote:

Originally Posted by Camarojt

I agree 100% with that. Dan I believe you had 11.50 in yours with some weight out so his may go 11.30-11.40's in negative DA.

I was meaning the same cam that Dan was running. Lol

, 4:30 @ kennadale today

Camarojt · 09-22-2013, 10:42 AM

I'm gonna say if you can run at least a 1.64 60ft today you will run between 11.75-11.90
Depending on DA and traction and if your tune and shift points are on.

white ZL1 · 09-22-2013, 10:47 AM

Kennedale is only 1/8 mile. I think sasquash's goal today is going to be getting the car to 60 foot. Plus it'll allow us to get some datalogs of his car and get it ready for October 5th.

sasquash1984 · 09-22-2013, 10:55 AM

Exactly Dan , mainly testing to see if it will hook and 60 fts

Camarojt · 09-22-2013, 12:32 PM

Gotcha. Should be around 1.6x 60ft and 7.5x-7.6x 1/8th.

rforbes · 09-22-2013, 01:08 PM

Well could not go to Dallas raceway Friday night because of the rain so I think I will go get some runs in at Rice Killers next Thursday if anyone wants to join. And it is only 10 bucks!

sasquash1984 · 09-22-2013, 01:36 PM

I'm always down

sasquash1984 · 09-22-2013, 07:12 PM

7.60 best so far temps starting to drop now

Camarojt · 09-22-2013, 08:28 PM

How late are they running tonight?

sasquash1984 · 09-22-2013, 08:50 PM

dont know its grudge match night and its fing packed i left and so did dan takes 1 hr in staging lanes

white ZL1 · 09-22-2013, 09:17 PM

I was shocked at how many cars and spectators were at this place. Packed doesn't really describe it.

Camarojt · 09-22-2013, 09:33 PM

What were your 60ft's with the restalled converter?

09-22-2013, 10:55 AM	#20
sasquash1984 502 RWHP N/A Drives: The yeti Join Date: May 2009 Location: Saginaw/ Ft Worth TX Posts: 3,085 View My Garage	Exactly Dan , mainly testing to see if it will hook and 60 fts __________________ factory motor factory trans, Gpi ss4 cam stock heads ported and milled, full exhaust, circle d 5c 4000 triple disk, 3:91 rear end with posi mod, cai, bmr derlin rear diff bushins, bmr derlin cradle bushins, bmr trailing arms, toe rods with bushings, and bmr anti extreme sway bar. Weld rt-s 17x5 fronts and 17X10 rears on mickey thompson et street r's

09-22-2013, 01:36 PM	#23
sasquash1984 502 RWHP N/A Drives: The yeti Join Date: May 2009 Location: Saginaw/ Ft Worth TX Posts: 3,085 View My Garage	I'm always down __________________ factory motor factory trans, Gpi ss4 cam stock heads ported and milled, full exhaust, circle d 5c 4000 triple disk, 3:91 rear end with posi mod, cai, bmr derlin rear diff bushins, bmr derlin cradle bushins, bmr trailing arms, toe rods with bushings, and bmr anti extreme sway bar. Weld rt-s 17x5 fronts and 17X10 rears on mickey thompson et street r's

09-22-2013, 07:12 PM	#24
sasquash1984 502 RWHP N/A Drives: The yeti Join Date: May 2009 Location: Saginaw/ Ft Worth TX Posts: 3,085 View My Garage	7.60 best so far temps starting to drop now __________________ factory motor factory trans, Gpi ss4 cam stock heads ported and milled, full exhaust, circle d 5c 4000 triple disk, 3:91 rear end with posi mod, cai, bmr derlin rear diff bushins, bmr derlin cradle bushins, bmr trailing arms, toe rods with bushings, and bmr anti extreme sway bar. Weld rt-s 17x5 fronts and 17X10 rears on mickey thompson et street r's

09-22-2013, 08:50 PM	#26
sasquash1984 502 RWHP N/A Drives: The yeti Join Date: May 2009 Location: Saginaw/ Ft Worth TX Posts: 3,085 View My Garage	dont know its grudge match night and its fing packed i left and so did dan takes 1 hr in staging lanes __________________ factory motor factory trans, Gpi ss4 cam stock heads ported and milled, full exhaust, circle d 5c 4000 triple disk, 3:91 rear end with posi mod, cai, bmr derlin rear diff bushins, bmr derlin cradle bushins, bmr trailing arms, toe rods with bushings, and bmr anti extreme sway bar. Weld rt-s 17x5 fronts and 17X10 rears on mickey thompson et street r's

09-22-2013, 10:42 AM	#18
Camarojt Drives: 2011camaro SS Join Date: Nov 2012 Location: Allen, Tx Posts: 2,201	I'm gonna say if you can run at least a 1.64 60ft today you will run between 11.75-11.90 Depending on DA and traction and if your tune and shift points are on.

09-22-2013, 10:47 AM	#19
white ZL1 Drives: none Join Date: Aug 2011 Location: DFW area Posts: 1,844	Kennedale is only 1/8 mile. I think sasquash's goal today is going to be getting the car to 60 foot. Plus it'll allow us to get some datalogs of his car and get it ready for October 5th.

09-22-2013, 12:32 PM	#21
Camarojt Drives: 2011camaro SS Join Date: Nov 2012 Location: Allen, Tx Posts: 2,201	Gotcha. Should be around 1.6x 60ft and 7.5x-7.6x 1/8th.

09-22-2013, 01:08 PM	#22
rforbes Drives: IOM SS/RS Join Date: Mar 2009 Location: The Colony, Texas Posts: 798 View My Garage	Well could not go to Dallas raceway Friday night because of the rain so I think I will go get some runs in at Rice Killers next Thursday if anyone wants to join. And it is only 10 bucks!

09-22-2013, 08:28 PM	#25
Camarojt Drives: 2011camaro SS Join Date: Nov 2012 Location: Allen, Tx Posts: 2,201	How late are they running tonight?

09-22-2013, 09:17 PM	#27
white ZL1 Drives: none Join Date: Aug 2011 Location: DFW area Posts: 1,844	I was shocked at how many cars and spectators were at this place. Packed doesn't really describe it.

09-22-2013, 09:33 PM	#28
Camarojt Drives: 2011camaro SS Join Date: Nov 2012 Location: Allen, Tx Posts: 2,201	What were your 60ft's with the restalled converter?