FS: Loaded ******** Stealthbox

[Jokerr713]

Im taking my audio setup in a different direction.
I have a ******** Stealthbox (model# 5G-DS10, drop in, no modification)
A Rockford Fosgate R1S410 10" sub.
A Rockford Fosgate Prime R-150-2
PAC SOEM-T Line out converter.
Everything is assembled to the box, wired ready to go.
I made a setup identical to the one done here:

http://www.camaro5.com/forums/showthread.php?t=191938

I made the harnesses exactly the same way. As it sits, this will drop right into a gen5 WITHOUT the Boston Acoustics system. The power and ground wires route under the carpet and are cut to the right length to be hidden nicely. It should install for the buyer very cleanly. The power and ground have ring connectors to go right to the battery terminal and a ground in front of the battery. The speaker harness will connect in line with the rear speakers so you will not need to cut or splice anything.

This setup wont break any windows, but fills the low end out better than the stock setup.

Asking $275obo, prefer local sale near western new york, but would consider meeting a buyer within a reasonable distance. I'm also willing to negotiate lower if you don't require the harness i made (if you DO have the BA system).

PM for pictures

[Jokerr713]

Bump, lowered to $225.

[Jokerr713]

$200

[Codeman1407]

Absolutely not shipping? or would you consider it?

[Jokerr713]

sold