San Diego

[z28racer]

Originally Posted by Dtrimpi87

I said WHERE lol

LOL. Sorry. AJ USA in Miramar.

[z28racer]

Originally Posted by 03Amputee

Hotchkis brace is here! :w ord:

COOOOOL.

[03Amputee]

Let me know if they do good work

[Dtrimpi87]

Originally Posted by z28racer

LOL. Sorry. AJ USA in Miramar.

So my installation services arent good enough for you I see

[03Amputee]

Lol Curiousity is all! I haven't seen reviews of your services yet but I hear the prices are good

[z28racer]

Originally Posted by Dtrimpi87

So my installation services arent good enough for you I see

No Just didnt want to put you out since you are always helping people out. I do really apreciate the offer and I know how maticualus you are. Just figured, drop it off in the morning pick it up at night. My old ass is getting lazy! I also wanted to try a good independent shop, which this one is supposed to be.:emoticon7: Thank You though. Trust me I will recruit you when it comes time for the sway bars.

[Dtrimpi87]

Originally Posted by z28racer

No Just didnt want to put you out since you are always helping people out. I do really apreciate the offer and I know how maticualus you are. Just figured, drop it off in the morning pick it up at night. My old ass is getting lazy! I also wanted to try a good independent shop, which this one is supposed to be.:emoticon7: Thank You though. Trust me I will recruit you when it comes time for the sway bars.

Lol no worries Tom. Just make sure they know what they are doing when they re-time the bushings. Im assuming they will be doing an alignment and bushing re-time as well.

[alexpdbz]

Originally Posted by 03Amputee

You going to come to race legal on the 7th?

I'll probably be out there if nothing comes up. I'm not very good at planning.

[z28racer]

Originally Posted by Dtrimpi87

Lol no worries Tom. Just make sure they know what they are doing when they re-time the bushings. Im assuming they will be doing an alignment and bushing re-time as well.

They are a authorized Eibach dealer. They didnt flinch and seemed to know what I was talking about when I mentioned timing the bushings. They spealize in german Cars I think. Look them up AJUSAAUTO.COM looks like a pretty good size repair shop, very clean and nice new equipment with fair prices.

[z28racer]

Originally Posted by alexpdbz

I'm not very good at planning.

My girlfriend always says that too.

[Dtrimpi87]

Up at Stillen picking up my lower grill

[z28racer]

Originally Posted by Dtrimpi87

Up at Stillen picking up my lower grill

[VEESIKS]

Originally Posted by Dtrimpi87

Na, all you need is a jack and jack stands. I think its easier on the V8s to do headers on Jack stands because the only thing you can do from the bottom is slide them in. Then you need to go back up top. I managed to install mine myself with a 2nd jack to hold to hold the headers up. It will be a lot easier with a 2nd set of hands.
.

Good info! I knew the SS cars had all the hardware basically in a line, us sixxers have 3 up top and 4 below so we gotta be under the car for more than the removal and placement. I think I'm going to pull mine off soon and wrap with some header wrap to keep engine bay temps down. I've been debating it for a while but I figure the BBK LT's are easy enough to get to the hardware that I may as well go for it.

[Dtrimpi87]

Project for tomorrow