Just dropped car off at ADM for a 417 build - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

10aSSee D · 11-23-2013, 01:05 PM

I drove my 2010 camaro from Tennessee and left it with Andy. I already have a 2.9 whipple, ADM dual fuel pumps, Gforce 9 inch, and BMR suspension. I really enjoyed talking with Andy and checking his shop out, I know my car is in good hands. He will be doing the 417 build and putting the whipple back on. He will also be installing a Street Slayer twin billet clutch. I have wanted ADM to do my build for a long time and I'm stoked the time has arrived!!

Wileycoyote · 11-23-2013, 01:32 PM

Congrats! I bet your really excited to get it back. And yes I have heard nothing but good things about ADM.

BullF-16 · 11-23-2013, 01:47 PM

Congrats!!! I think i almost had Andy convinced to do my upcoming twin turbo build. I decided to stick with my main shop since they seemed really excited to take it on.

Subscribed

My shop is building a CTS-V with a very similar custom twin turbo setup. This car's goal is the CTS-V record in the March Texas mile.

10aSSee D · 11-23-2013, 04:31 PM

I am very excited! They know how to build some awesome machines.

BiggFoot · 11-23-2013, 04:48 PM

Quote:

Originally Posted by BullF-16

Congrats!!! I think i almost had Andy convinced to do my upcoming twin turbo build. I decided to stick with my main shop since they seemed really excited to take it on.

Subscribed

My shop is building a CTS-V with a very similar custom twin turbo setup. This car's goal is the CTS-V record in the March Texas mile.

That will be a ground rocket.

SGDM · 11-23-2013, 05:42 PM

Congrats! You will be extremely happy with the build.

NinoSS · 11-23-2013, 07:21 PM

These builds are getting to be the norm here. I know these cars are pigs, but they can make some power!!!

Can't wait to see the results!!!

10aSSee D · 11-23-2013, 07:56 PM

Thanks everyone, I know I will love it when Andy and the crew get done.

Unavowed · 11-24-2013, 07:59 AM

Post the details here when you get a chance:
http://www.camaro5.com/forums/showthread.php?t=311407
Congrats on your build.

10aSSee D · 11-24-2013, 08:00 AM

Quote:

Originally Posted by Unavowed

Post the details here when you get a chance:
http://www.camaro5.com/forums/showthread.php?t=311407
Congrats on your build.

Will do. Thanks.

MANNYS2SS/RS · 11-24-2013, 09:17 AM

Awesome, you are in good hands.

10aSSee D · 11-24-2013, 09:57 AM

Quote:

Originally Posted by MANNYS2SS/RS

Awesome, you are in good hands.

I agree, no worries here

BiggFoot · 11-25-2013, 06:42 AM

Quote:

Originally Posted by 10aSSee D

I drove my 2010 camaro from Tennessee and left it with Andy. I already have a 2.9 whipple, ADM dual fuel pumps, Gforce 9 inch, and BMR suspension. I really enjoyed talking with Andy and checking his shop out, I know my car is in good hands. He will be doing the 417 build and putting the whipple back on. He will also be installing a Street Slayer twin billet clutch. I have wanted ADM to do my build for a long time and I'm stoked the time has arrived!!

Is Andy sending your block to LPE or a local shop for the bore/stroke? I assume you will be going back with forged internals/the works!

ADM PERFORMANCE · 11-25-2013, 07:41 AM

Quote:

Originally Posted by BiggFoot

Is Andy sending your block to LPE or a local shop for the bore/stroke? I assume you will be going back with forged internals/the works!

We keep 417 's on shelf now.

His engine is the core.

11-23-2013, 01:05 PM	#1
10aSSee D Drives: Silver 2010 SS Camaro Join Date: Jul 2009 Location: TN Posts: 2,562	Just dropped car off at ADM for a 417 build I drove my 2010 camaro from Tennessee and left it with Andy. I already have a 2.9 whipple, ADM dual fuel pumps, Gforce 9 inch, and BMR suspension. I really enjoyed talking with Andy and checking his shop out, I know my car is in good hands. He will be doing the 417 build and putting the whipple back on. He will also be installing a Street Slayer twin billet clutch. I have wanted ADM to do my build for a long time and I'm stoked the time has arrived!! __________________ MODS: ADM built 417, 2.9L Whipple with 3.250 pulley, ADM ported and polished LSA heads,ADM stage3 cam,ADM LSA belt drive system,ADM CAI race scoop, ADM dual fuel pumps, ID 850's, BMR full suspension, Gforce 9 inch kit with 3.5 inch driveshaft, Street Slayer twin carbon clutch, Lingenfelter oil seperator. Tuned by built by ADM Performance, 763rwhp,705rwtq

11-23-2013, 01:47 PM	#3
BullF-16 USAF retired! Thank God! Drives: 2011 1SS, 1LT red,1LT/RS SGM 98Z28 Join Date: Jul 2011 Location: North Texas Posts: 2,799	Congrats!!! I think i almost had Andy convinced to do my upcoming twin turbo build. I decided to stick with my main shop since they seemed really excited to take it on. Subscribed My shop is building a CTS-V with a very similar custom twin turbo setup. This car's goal is the CTS-V record in the March Texas mile. __________________ HKE LSX427(Mast blk lbl 305 6bolt LS7heads, PatG231/246 blower cam, RWHP/TQ: 1281/1133 SNL Performance Custom Twin PT6766 BB turbos 4 to 25psi selectable on the Boost Leash controller, Squash dual 400LPH/ID2000s, ALKY 4 gal meth, Autometer AFR/Bst/oilpres/oiltemp/fuelpress gauges, Pedders Justice road crs pkg: All HD bushes, supercar 12kg coil overs, supercar ZL1 sways, camber plates all setup by JusticePete! :Gforce 9" 35spline S-Trac, 1500hp Outlaw axles, 3.5"alum DS, Monster Triple disc; 4xForgeline 19x10.5 4xBridgestone 305/30R19 RE-11, CTS-v calipers/rotors/Cobalt friction XR1/3 pads

11-23-2013, 04:31 PM	#4
10aSSee D Drives: Silver 2010 SS Camaro Join Date: Jul 2009 Location: TN Posts: 2,562	I am very excited! They know how to build some awesome machines. __________________ MODS: ADM built 417, 2.9L Whipple with 3.250 pulley, ADM ported and polished LSA heads,ADM stage3 cam,ADM LSA belt drive system,ADM CAI race scoop, ADM dual fuel pumps, ID 850's, BMR full suspension, Gforce 9 inch kit with 3.5 inch driveshaft, Street Slayer twin carbon clutch, Lingenfelter oil seperator. Tuned by built by ADM Performance, 763rwhp,705rwtq

11-23-2013, 05:42 PM	#6
SGDM Drives: 2016 2SS Join Date: Nov 2011 Location: North Texas Posts: 1,422	Congrats! You will be extremely happy with the build. __________________ Who Dares...Wins

11-23-2013, 07:21 PM	#7
NinoSS Drives: 2SS/RS CGM LS3 Join Date: Aug 2009 Location: NJ Posts: 1,619	These builds are getting to be the norm here. I know these cars are pigs, but they can make some power!!! Can't wait to see the results!!! __________________ Current - 2018 NGM 1LE (LT4 conversion coming soon) SOLD 2010 LS3 / Vengeance stage I cam / CAI intake w/ADM race scoop / Dynatech LT's / Eaton Posi LPE-JRE 3.91's / L99 Corsa / ZL1 wheels / NT05 275/315

11-23-2013, 01:32 PM	#2
Wileycoyote Drives: 2013 2SS/RS 1LE Join Date: Mar 2013 Location: Texas Posts: 215 View My Garage	Congrats! I bet your really excited to get it back. And yes I have heard nothing but good things about ADM.

11-23-2013, 07:56 PM	#8
10aSSee D Drives: Silver 2010 SS Camaro Join Date: Jul 2009 Location: TN Posts: 2,562	Thanks everyone, I know I will love it when Andy and the crew get done. __________________ MODS: ADM built 417, 2.9L Whipple with 3.250 pulley, ADM ported and polished LSA heads,ADM stage3 cam,ADM LSA belt drive system,ADM CAI race scoop, ADM dual fuel pumps, ID 850's, BMR full suspension, Gforce 9 inch kit with 3.5 inch driveshaft, Street Slayer twin carbon clutch, Lingenfelter oil seperator. Tuned by built by ADM Performance, 763rwhp,705rwtq

11-24-2013, 07:59 AM	#9
Unavowed Drives: Twin turbo G8 GXP Join Date: Dec 2012 Location: MD Posts: 454	Post the details here when you get a chance: http://www.camaro5.com/forums/showthread.php?t=311407 Congrats on your build.

11-24-2013, 09:17 AM	#11
MANNYS2SS/RS Drives: 2010 Camaro 2SS/RS,LS3 Join Date: Oct 2010 Location: South Florida Posts: 1,237	Awesome, you are in good hands. __________________ LS-3, ProCharger D1SC 665. rwhp /562. rwtq @ 9.3 psi