Plenum Spacer for your LLT - Page 6 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

11 Camaro IBM · 04-15-2012, 12:28 AM

I need my cover for shows so how can we work around this

chicagobulls · 04-15-2012, 12:29 AM

Quote:

Originally Posted by 11 Camaro IBM

I need my cover for shows so how can we work around this

Take it with you?

DAL123 · 04-15-2012, 06:55 AM

http://i262.photobucket.com/albums/i...install010.jpg

What do we do with this??

JHenfling · 04-15-2012, 07:33 AM

PM me for price to 63857

chozn4service · 04-15-2012, 09:16 AM

Price 46278

Kmorpheus · 04-15-2012, 10:30 AM

In looking at how my engine cover is sitting I think the cover can still be used. I would need to extend the stud for the front passenger side, Not a big deal. I had read that to extend the Oil fill port you can go to the GM parts dealer in your area or online and get one the was made for a G8, Nothing definite but I did read it somewhere.

Now we come to the rear connecting point. I don't see them being a problem because the hooking points for the Engine cover fingers are going to be moved up with the Plume.

It would be interesting for someone that has this installed to do a clearance test with the hood. (not mentioning any names)

.

So if the guys at Mace can get some more power out of our LLT, us putting a plastic cover over it should not be a major obstacle.

Ventmaster · 04-15-2012, 10:45 AM

I've got the 25mm insulator, but no plenum spacer (yet). The hood closes without issue with the engine cover in place..

I expect the 12mm plenum spacer and Black Iceolator combo would be no problem.

Steve- when do you expect to have the bolt packs for plenum spacer/25mm insulator installation?

I'm ready to order when you are...

11SynergyGr&Bl · 04-15-2012, 10:50 AM

PM price to 85050. Thank you ^.^ Also price on bolt kits if you have them available thanks =D

Elykson · 04-15-2012, 12:32 PM

Quote:

Originally Posted by DAL123

http://i262.photobucket.com/albums/i...install010.jpg

What do we do with this??

Great question! I'm interested in the answer as well.

Ir0nM4n · 04-15-2012, 01:34 PM

Quote:

Originally Posted by 11 Camaro IBM

I need my cover for shows so how can we work around this

Ducktape

bmorecam · 04-15-2012, 01:49 PM

Quote:

Originally Posted by Elykson

Great question! I'm interested in the answer as well.

you guys will be fine. it come with 4-12mm aluminum adapters. you will also need 4 m8-1.25, 160mm hex bolts(coarse) for the center. you can use the same bolts for the very front and very rear. you will also need new plenum cover bolts. I can't remember what was the new size you will need but you can get those from home depot all day long. the factory size is m6-1, so just get something that's at least 10mm longer from factory length. The long four 160mm bolts will have to be ordered unless you can somehow find those at local hardware specialty store, but I had no luck. I had to order from Texas for 13 bucks for 4. not sure how Steve is going to go about the new bolts needed but remember that what I mentioned are for 25mm insulator. if you have vmax 9mm insulator than im sure you guys will need different size bolts to compliment the smaller vmax size.

Sent from my LG-P500 using Tapatalk

rtcat600man · 04-15-2012, 02:01 PM

Quote:

Originally Posted by Kmorpheus

In looking at how my engine cover is sitting I think the cover can still be used. I would need to extend the stud for the front passenger side, Not a big deal. I had read that to extend the Oil fill port you can go to the GM parts dealer in your area or online and get one the was made for a G8, Nothing definite but I did read it somewhere.

Now we come to the rear connecting point. I don't see them being a problem because the hooking points for the Engine cover fingers are going to be moved up with the Plume.

It would be interesting for someone that has this installed to do a clearance test with the hood. (not mentioning any names)

.

So if the guys at Mace can get some more power out of our LLT, us putting a plastic cover over it should not be a major obstacle.

I had to raise my stud even before adding the Iceolator. So after the install I had to raise it to the point that I needed to make a bracket. Someday I may go with something different, but for now this works.

As for the G8 oil extension tube, you will want to get part # 92068813. This is the extension tube and the oil cap combined.

Here are a couple photos of my stud extension bracket, and the oil tube extension.

derek19 · 04-15-2012, 02:55 PM

Pleae PM price, 38016

67 GTO · 04-15-2012, 03:02 PM

Oh no, more stuff.

Thought I was done for now.

Price to 18960 please lol.

04-15-2012, 06:55 AM	#73
DAL123 Drives: 2010 Camaro 2LT/RS/A6 Join Date: Aug 2009 Location: New Bedford, Mass. Posts: 106 View My Garage	http://i262.photobucket.com/albums/i...install010.jpg What do we do with this?? __________________ Trifecta Tune, Vararam CAI,Self ported Intake Manifold,3/8 Black Iceolator,Rx Catch Can, W/Breather, V8 Rear Diff. 3:45s W/Posi Mod, Mrt V2.0 Axel Back, Magnaflow Resonated X-pipe, Street Scene Front Splitter.,V-Max Trottle Body., Eiback Sway Bars., Phadt End Links.,

04-15-2012, 09:16 AM	#75
chozn4service Drives: 2016 SS w/2SS A8 Blue Velvet Join Date: Dec 2009 Location: 39.793153,-86.238223 Posts: 3,678 View My Garage	Price 46278 __________________ Never grow up, it's a trap!

04-15-2012, 10:30 AM	#76
Kmorpheus Account Suspended Drives: Green Dream Machine Join Date: Mar 2011 Location: Waterloo, IA AUN Posts: 296 View My Garage	In looking at how my engine cover is sitting I think the cover can still be used. I would need to extend the stud for the front passenger side, Not a big deal. I had read that to extend the Oil fill port you can go to the GM parts dealer in your area or online and get one the was made for a G8, Nothing definite but I did read it somewhere. Now we come to the rear connecting point. I don't see them being a problem because the hooking points for the Engine cover fingers are going to be moved up with the Plume. It would be interesting for someone that has this installed to do a clearance test with the hood. (not mentioning any names). So if the guys at Mace can get some more power out of our LLT, us putting a plastic cover over it should not be a major obstacle.

04-15-2012, 10:50 AM	#78
11SynergyGr&Bl JZ Drives: 2011 Synergy Green Camaro Join Date: May 2011 Location: Arizona Posts: 175	PM price to 85050. Thank you ^.^ Also price on bolt kits if you have them available thanks =D __________________ 2011 SGM Camaro Hi/low 8k HID kit, Injen WB long tube, Pfadt stage 2, Rx black ice-olator, Rx catch can (color matched =D).

04-15-2012, 03:02 PM	#84
67 GTO 13.453 @ 101.90 Drives: 2010 Camaro 2LT Rally Yellow Join Date: May 2009 Location: SE Pa. Posts: 1,877	Oh no, more stuff. Thought I was done for now. Price to 18960 please lol. __________________ GMPP exhaust/JBA shorties/Vararam CAI/VMax TB/SLP Pulley/VMax IM isolator/MACE Ported IM +Plenum Spacer/IPF Tuned

04-15-2012, 12:28 AM	#71
11 Camaro IBM Drives: Camaro IBM Join Date: Aug 2011 Location: Tx Posts: 1,007 View My Garage	I need my cover for shows so how can we work around this

04-15-2012, 07:33 AM	#74
JHenfling Drives: 2010 Chevrolet Camaro 2LT/RS Join Date: Feb 2012 Location: Kennett Mo Posts: 58	PM me for price to 63857

04-15-2012, 10:45 AM	#77
Ventmaster Drives: 2017 1SS 6spd Join Date: Jan 2011 Location: Utah Posts: 2,869	I've got the 25mm insulator, but no plenum spacer (yet). The hood closes without issue with the engine cover in place.. I expect the 12mm plenum spacer and Black Iceolator combo would be no problem. Steve- when do you expect to have the bolt packs for plenum spacer/25mm insulator installation? I'm ready to order when you are...

04-15-2012, 02:55 PM	#83
derek19 Drives: 2011 1LT RS Join Date: Apr 2011 Location: Memphis Posts: 184	Pleae PM price, 38016

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Join TEAM LLT social group	RSokie	Camaro V6 LLT Engine, Exhaust, and Bolt-Ons	2849	02-10-2014 09:41 PM
MACE 25mm Manifold spacer/ insulator to suit LLT	MACE_ENG	V6 Bolt-Ons & Tunes	50	07-16-2012 12:39 AM
Vmax Intake Manifold "BLACK ICE-olator" V6 LLT Base Test Results	Mike Norris	Camaro V6 LLT Engine, Exhaust, and Bolt-Ons	297	03-31-2012 07:41 PM
Throttle Body Spacer on LLT	Nutbutt	Camaro V6 LLT Engine, Exhaust, and Bolt-Ons	19	11-14-2011 11:02 PM