WTB:: Used Stock LS3 cylinder heads

[old motorhead]

As title says. Let me know what you have and how much you want for them. Thanks.

[Lol_epa]

I have some 5384 heads with new valves and seals. Been milled 25 and it had a valve job also since it has all new valves. Has stock l99 springs on them also. Make offer


Sent from my iPhone using Tapatalk

[old motorhead]

Originally Posted by Lol_epa

I have some 5384 heads with new valves and seals. Been milled 25 and it had a valve job also since it has all new valves. Has stock l99 springs on them also. Make offer


Sent from my iPhone using Tapatalk

Thanks for the offer, but I'm looking for LS3 heads with the hollow stem intake valves.

[SLOW1SS]

I have some 823s you would have to change the valves though

[Blownfogger540]

i have new 823 heads with replaced hollow stem ls3 valves $800
new 823 heads with ls9 titanium valves $1200
new lsa heads $900

all sets are assembled as stock can assemble with btr spring kit also

[old motorhead]

Originally Posted by Blownfogger540

i have new 823 heads with replaced hollow stem ls3 valves $800
new 823 heads with ls9 titanium valves $1200
new lsa heads $900

all sets are assembled as stock can assemble with btr spring kit also

The folks doing my port work are going to do a valve job for the same price. I'm needing a set of LS3 heads for them to port so my LS3 doesn't lay open for 2 or 3 weeks. Plan is to sell my stockers after the LS3 is buttoned back up. Don't think I can get anywhere near $800 for them.

The 823's with the hollow stem valves are tempting, but a little out of my price range. Already have BTR springs. Plus, I think the freight from B. C. all the way down to SE TX would make this deal prohibitive. Thanks.

[Nutro]

Originally Posted by old motorhead

The folks doing my port work are going to do a valve job for the same price. I'm needing a set of LS3 heads for them to port so my LS3 doesn't lay open for 2 or 3 weeks. Plan is to sell my stockers after the LS3 is buttoned back up. Don't think I can get anywhere near $800 for them.

The 823's with the hollow stem valves are tempting, but a little out of my price range. Already have BTR springs. Plus, I think the freight from B. C. all the way down to SE TX would make this deal prohibitive. Thanks.

I'd be interested in your stock heads once removed. I actually have a set of 821 LS3 heads in my garage going on my 6.0L 370ci build. They are untouched but I installed some new GM blue springs.

[old motorhead]

Originally Posted by Nutro

I'd be interested in your stock heads once removed. I actually have a set of 821 LS3 heads in my garage going on my 6.0L 370ci build. They are untouched but I installed some new GM blue springs.

I'll keep you in mind once we get the heads off. They're from a 50K mile LS3. Running perfectly now. I've bought and sold quite a few things from folks in Austin. Always met in Giddings to do the deal.

[Blownfogger540]

Originally Posted by old motorhead

The folks doing my port work are going to do a valve job for the same price. I'm needing a set of LS3 heads for them to port so my LS3 doesn't lay open for 2 or 3 weeks. Plan is to sell my stockers after the LS3 is buttoned back up. Don't think I can get anywhere near $800 for them.

The 823's with the hollow stem valves are tempting, but a little out of my price range. Already have BTR springs. Plus, I think the freight from B. C. all the way down to SE TX would make this deal prohibitive. Thanks.

i ship to usa all the time from B.C and is cheaper then when i ship from W.A state lol
but i think your dreaming if you think your gona find used ls3 heads less than $600

mine are new $800 assembled

[Nutro]

Originally Posted by Blownfogger540

i ship to usa all the time from B.C and is cheaper then when i ship from W.A state lol
but i think your dreaming if you think your gona find used ls3 heads less than $600

mine are new $800 assembled

I've bought 3 sets of 821 for around that. Lowest was $400 and high was $750 for new takeoffs.

[old motorhead]

Originally Posted by Blownfogger540

i ship to usa all the time from B.C and is cheaper then when i ship from W.A state lol
but i think your dreaming if you think your gona find used ls3 heads less than $600

mine are new $800 assembled

I'm not asking for new heads for $600. Just rebuildable cores. I have seen a few with an asking price higher than that. They're still for sale though. If I have to pay more than $600, I'll tape the engine up, throw a tarp over it, and just leave it like that for a few weeks while my heads are being worked. Not my preferred way of doing it though.

[KW Baraka]

Originally Posted by old motorhead

I'm not asking for new heads for $600. Just rebuildable cores. I have seen a few with an asking price higher than that. They're still for sale though. If I have to pay more than $600, I'll tape the engine up, throw a tarp over it, and just leave it like that for a few weeks while my heads are being worked. Not my preferred way of doing it though.

One of two things I can offer:

1. Texas Speed PRC 260 heads with 65cc combustion chambers and almost new BTR .660" springs with about 25K miles. These are available now.

http://www.texas-speed.com/p-4010-pr...der-heads.aspx

or

2. OEM heads with 260cc intake runners and aftermarket valves, CRC ported by Texas Speed with about 12K miles. These are available if you choose them and AFTER I swap them for the PRC 260's.

http://www.texas-speed.com/p-1388-pr...d-porting.aspx

PM me if interested.....we'll exchange numbers and talk this through.

KW

[old motorhead]

Just got my heads in. They look perfect. Just for the record....5500 mile takeoffs (to install Trick Flows) for $600 shipped to me. Thanks.

[Nutro]

Originally Posted by old motorhead

Thanks for the offer, but I'm looking for LS3 heads with the hollow stem intake valves.

Careful dealing with Lol_epa