08-15-2022, 06:41 PM | #15 |
Drives: 2011 SS-RS Join Date: May 2011
Location: FLORIDA
Posts: 11,449
|
From them is was about 1k, which 600 of that was a returnable core charge that I got back when I sent mine back to them. They did an "exchange" deal where you didn't have to take your car out of service, or you could take your car out of service and send yours in to them. Kevin Whitford was the guy I dealt with, and he rebuilds them with all new parts. Mine are 4 years old and still look brand new..
__________________
TSP STAGE 3 CAM,231/246 @112 LSA 614/641 LIFT, CIRCLE D 5C-4200-4500 CONVERTER,LOD INTAKE.CORSA EXHAUST. DSS 1 PC DS. PEGASUS SOLID CRADLE MOUNTS. 486RWHP/475RWTQ.LOTS MORE.
|
08-21-2022, 05:09 PM | #16 |
Drives: Chevrolet Camaro SS Join Date: Jul 2021
Location: McKinney, TX
Posts: 269
|
Do them right if you're going to the trouble of powder. Full breakdown and rebuild with fresh seals. It's not much difference in labor or cost when you're going this far.
|
08-21-2022, 07:35 PM | #17 |
Drives: 2011 SS-RS Join Date: May 2011
Location: FLORIDA
Posts: 11,449
|
Yes sir, great advice!! And you DON'T really want to have any problems with your brakes, ever, so do it the right way..
__________________
TSP STAGE 3 CAM,231/246 @112 LSA 614/641 LIFT, CIRCLE D 5C-4200-4500 CONVERTER,LOD INTAKE.CORSA EXHAUST. DSS 1 PC DS. PEGASUS SOLID CRADLE MOUNTS. 486RWHP/475RWTQ.LOTS MORE.
|
08-25-2023, 01:35 PM | #18 | |
Captain Gingerbeard
Drives: 2012 IOM RS/SS 6MT Join Date: Feb 2013
Location: West Twin Cities, MN
Posts: 2,489
|
So to dig this up, where did you all source the orings between the caliper halves? I can find piston kits easily, but nothing for the caliper halves.
__________________
Custom ordered 2012 6MT RS/SS on 11/25/2011. Picked up 01/31/12.
Pedders Coilovers, BMR trailing arms and toe-links, Prothane solid poly subframe bushings, JDP Motorsports rear upper control arm bushings, Texas Speed long-tube headers with 2" primaries, modified fully 3" Magnaflow competition catback. CAI cold-air intake. DBA rotors, Hawk pads. Quote:
|
|
08-25-2023, 04:37 PM | #19 |
Drives: 2009 ZR1 Join Date: May 2010
Location: KCMO
Posts: 3,205
|
|
08-25-2023, 07:49 PM | #20 |
Drives: 2011 2SS/RS Join Date: Feb 2016
Location: Jacksonville FL
Posts: 1,190
|
There are none. The calipers on 5th gens have external crossover lines. Also, you need to find the exact torque spec for the halves.
__________________
•2011 Camaro SS 2SS/RS A6
•MRR M017 1le Replica Wheels •Vararam Ram Air Intake •Speed Engineering Longtube Headers w/ Magnaflow HF Cats •Bo White PnP Stage 2 TB •GPI SS2 VVT Cam w Cometic thin gaskets 10.69 compression •Xpipe w/ Res Delete and NPP Exhaust •Tuned By Anonymous Calibrations •Gen5DIY Mylink Conversion W/ Backup Cam •Morel 3 way custom speakers, Infinity 860w Subwoofers in trunk baffle •Helix P6 6ch amp w/ 8ch DSP and P1 Sub amp |
|
|
|
|