ADM Performance Stage Two Build... - Page 2 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

ADM PERFORMANCE · 02-06-2010, 06:56 AM

Quote:

Originally Posted by tones2SS

Very nice job AGAIN Andy. You guys are doing some great work out of that shop.

Very nice for 7.5 psi and over 630 ponies to the rear wheels. So, I'm guessing about, 740ish at the crank?

I try to raise the bar everyday..

Bill has a great package here for just day to day driving as well as tearing up the track.

740 is what I came up with as well -

Andy

tones2SS · 02-06-2010, 01:33 PM

Quote:

Originally Posted by ADM PERFORMANCE

I try to raise the bar everyday..

Bill has a great package here for just day to day driving as well as tearing up the track.

740 is what I came up with as well -

Andy

Very cool.
Keep up the great work.

ADM PERFORMANCE · 03-12-2010, 10:18 PM

Quote:

Originally Posted by tones2SS

Very cool.
Keep up the great work.

Thanks!!!

Simster · 03-13-2010, 11:35 AM

Andy - any chance you could PM me the parts list and cost for this setup? I already have the Maggie on the way, but definitely want a (I believe) a stage two blower cam from you if this is what was done with this setup.

Thanks,

-Simster

-edit- I reread the original post and see all you added was the blower, cam, headers and CAI. What size pulley did you use?

GotMeSOM · 03-13-2010, 01:16 PM

Is this with a stock exhaust, or cutouts?

GMRULZ · 03-13-2010, 01:52 PM

Nice Job Andy and company!!

ADM PERFORMANCE · 03-14-2010, 07:08 AM

Quote:

Originally Posted by GotMeSOM

Is this with a stock exhaust, or cutouts?

Headers and magnaflow 3" with cats

SSMagna · 03-14-2010, 07:26 AM

That's why my car is at ADM right now! Andy does what he does for all the right reasons and I'm proud mine is there. It's going to be a great build and will be at Camaro Fest and just maybe Pink's All Out!
Thanks,
Andy

GoodTimes · 03-14-2010, 12:08 PM

Andy what I like is that you are showing these incredible numbers and the car is running the non-race ADM CAI. Have all that power and still have windshield washer fluid... cool.

ADM PERFORMANCE · 03-19-2010, 08:43 PM

Quote:

Originally Posted by GoodTimes

Andy what I like is that you are showing these incredible numbers and the car is running the non-race ADM CAI. Have all that power and still have windshield washer fluid... cool.

90 percent of my customers cars are daily drivers.10 percent are garage queens.

Our Intakes have proven that they will work from bone stock to well over 900hp.They also fit magnacharger systems with almost no changes.

ADM PERFORMANCE · 05-13-2010, 08:04 PM

Quote:

Originally Posted by GMRULZ

Nice Job Andy and company!!

Thanks for the kind words

Number_9 · 05-13-2010, 09:43 PM

Quote:

Originally Posted by GoodTimes

Andy what I like is that you are showing these incredible numbers and the car is running the non-race ADM CAI. Have all that power and still have windshield washer fluid... cool.

what else would you expect though?

2010 SSRS · 05-13-2010, 10:18 PM

I'm getting the ADM CAI

jmjackso · 05-15-2010, 10:59 AM

Andy is really the only one I listen to when it comes to these cars. I have seen first hand how he does business and the dedication he puts into ALL his work. Anyone that is able to send their car to him to be worked on is one very lucky person. He will treat your car like its his own while it is with him and yes people.. unlike most shops.. he is the one doing work on the cars. Him and Pat. He isnt just some guy who surfs the boards and handles just the business end of the business.. When you here "Built by ADM." That car was actually built by Andy as well as Tuned!

I have great respect for him and his shop and will highly recommend him to ANYONE!

I cant wait to see whats next Andy, I know you are always going for more new and exciting builds!

03-13-2010, 01:52 PM	#20
GMRULZ Drives: 2010 SS & 2008 C6 Join Date: Mar 2008 Location: VA Posts: 1,819	Nice Job Andy and company!! __________________ 2010 SS L99, 536rwhp 10.843@126.72. Whipple Supercharger stock pulley, ARH 1 7/8 longtubes w/ catted xpipe, magnaflow 3" mufflers, ADM Race CAI, 3:70 gears, lightweight wheels and nitto drag radials. Stock internal L99, stock converter. Bolt on best before blower 12.22@113.29 w/ nothing but ARH headers, catted x-pipe, ADM CAI and a tune on stock Pzero`s! Other car 2008 C6 Ls3, z51, A6, Npp Exhaust, best bonestock pass 11.80@118.82, Number 2 on the Corvette Forums Bonestock fastest list..

03-14-2010, 07:26 AM	#22
SSMagna FAST1 Drives: ADM LSX 427 Twin Turbo #1 Join Date: Jan 2010 Location: Texas Posts: 402	That's why my car is at ADM right now! Andy does what he does for all the right reasons and I'm proud mine is there. It's going to be a great build and will be at Camaro Fest and just maybe Pink's All Out! Thanks, Andy Last edited by SSMagna; 03-14-2010 at 10:10 AM.

05-13-2010, 10:18 PM	#27
2010 SSRS Drives: 3 V8 Camaros Join Date: May 2009 Location: The Ocean State Posts: 111,187 View My Garage	I'm getting the ADM CAI __________________ Jannetty Racing JRE Street Package

05-15-2010, 10:59 AM	#28
jmjackso Drives: 2014 2SS/RS Camaro Join Date: Sep 2008 Location: Murrieta, CA Posts: 135	Andy is really the only one I listen to when it comes to these cars. I have seen first hand how he does business and the dedication he puts into ALL his work. Anyone that is able to send their car to him to be worked on is one very lucky person. He will treat your car like its his own while it is with him and yes people.. unlike most shops.. he is the one doing work on the cars. Him and Pat. He isnt just some guy who surfs the boards and handles just the business end of the business.. When you here "Built by ADM." That car was actually built by Andy as well as Tuned! I have great respect for him and his shop and will highly recommend him to ANYONE! I cant wait to see whats next Andy, I know you are always going for more new and exciting builds! __________________ _____________________________________________ Then: 2010 Camaro M6 2SS/RS: Stroked, Blown and then some 783rwhp/834rwtq = SOLD Now: 2014 Camaro L99 2SS/RS: TSP Headers, No Cats, NPP.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Hawk Performance Brake Pad "Updated"	KILLER74Z28	Suspension / Brakes / Chassis	34	05-04-2016 11:11 AM
Mustangs................	vontivonti	5th Gen Camaro SS LS LT General Discussions	4052	12-21-2009 10:42 PM
ADM Performance Stage 1 Cam/Downpipes package	ADM PERFORMANCE	V8 Bolt-Ons & Tunes	19	09-21-2009 08:08 PM
ADM Performance CAI Installed and Rocking!	Number_9	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	3	09-13-2009 08:50 AM
Roush Stage 3 Blackjack Mustang	TAG UR IT	General Automotive + Other Cars Discussion	16	05-21-2007 07:32 PM

03-13-2010, 11:35 AM	#18
Simster Drives: 2010 Camaro 2SS/RS LS3 CGM Join Date: Feb 2010 Location: Narvon, PA Posts: 255	Andy - any chance you could PM me the parts list and cost for this setup? I already have the Maggie on the way, but definitely want a (I believe) a stage two blower cam from you if this is what was done with this setup. Thanks, -Simster -edit- I reread the original post and see all you added was the blower, cam, headers and CAI. What size pulley did you use?

03-13-2010, 01:16 PM	#19
GotMeSOM Drives: Blown 02 SOM SS (630 hp old ride) Join Date: Feb 2010 Location: Orlando, Fl Posts: 95	Is this with a stock exhaust, or cutouts?

03-14-2010, 12:08 PM	#23
GoodTimes Drives: 1968 Camaro, 2002 Grand Am GT Join Date: Aug 2009 Location: Atlanta, GA Posts: 52	Andy what I like is that you are showing these incredible numbers and the car is running the non-race ADM CAI. Have all that power and still have windshield washer fluid... cool.