03-07-2012, 05:07 PM | #1 |
Drives: 2010 1SS CGM LS3 w/ blk rally Join Date: Jan 2010
Location: san diego, CA area
Posts: 258
|
Paint calipers
Im wanting to paint my brembo calipers black. Anyone know a good product to use for this. Also I have some rub marks on my calipers and there is bare metal exposed, what type of primer should I put on this.
Any tips or how-to would be appreciated too, although Im hoping this is pretty straight foward.
__________________
Installed mods:
Kooks 1 7/8" headers w/ high flow cats, Borla x-pipe, Borla Stinger exhaust, Cold Air Inductions CAI, markers, tail and reverse lights plus parking light blackouts, body colored bowties, body colored SS emblems, Passport 9500 radar detector (a must have), Kenwood DNX9960 radio w/ metra kit. Matte Black Giovanna Dalar 5V: 20x8.5 & 20x10 wheels Mods in the future: Relocating guts of "shark fin" and removing it, cam, super charge/turbo?...unsure what after that... Gotta have MORE power!! |
03-07-2012, 05:32 PM | #2 |
Drives: 2014 Z51 Corvette Join Date: Apr 2011
Location: Ofallon, Mo.
Posts: 5,822
|
G2 Caliper kit.
|
03-07-2012, 07:40 PM | #3 |
|
Did mine with G2 in black. I removed the rotors and pads. Get a better brush then what G2 supplies. Clean the calipers throughly, go over them with a scotch brite pad and clean them again. I did 3 coats on each caliper and used a tad more than 1/2 the can of paint. Finished the calipers off with silver Chevrolet and red Brembo stickers just like OEM. I also masked the silver finished bolts holding the calipers together, brake line banjo bolt, bleeder port and line connecting the 2 halves of the calipers together. Nice smooth finish which has stood up to 5K miles of driving and 1 track day at Roebling road. They still look new.
Ed M.
__________________
RJT 2SS/RS, AAM 3.70's, MTI Sway Bars, Shifter & SS brake lines, ZLI calipers, rotors & pads, BMR Trailing & Toe Arms, rear cradle & diff bushes, Pedders XA's, Camber/Toe eccentrics, Radius arm inserts, GTO clutch reservoir, LS9 cam, Comp valve springs, Melling 10296 oil pump, CR5 timing chain, LS6 damper, CAI Cold Air Intake, ARH LT headers w/HF cats, GMPP touring axle back, Elite Engineering Catch Can, Forgeline 20x9.5 & 20x11 DS3 whls, 275/40/20 & 315/35/20 tires, 2011 Convertible spoiler, 1LE front spoiler, Lloyd "SS" Floor Mats, GM Camaro Trunk Mat, wrapped console & Grant steering wheel.
|
03-07-2012, 07:47 PM | #4 |
RIP - Convertible SS
Drives: '13 Mustang Boss 302 - RED Join Date: Apr 2011
Location: Houston, TX
Posts: 960
|
G2
|
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Washing/Detailing for Newbies | MRK III Z28 | Cosmetic Maintenance: Washing, Waxing, Detailing, Bodywork, Protection | 125 | 02-05-2024 09:55 PM |
DIY: Painting Calipers | SnoopyAce7 | Camaro DIY & HOW-TO instructions & discussions | 42 | 08-17-2014 02:54 PM |
Brembo Calipers Paint and Bolts? | nitto85 | Camaro Issues / Problems | Warranty Discussions | TSB and Recalls | 2 | 06-11-2011 10:08 PM |
Getting ready to paint my calipers - have some quick questions | jmhenry5150 | Suspension / Brakes / Chassis | 5 | 06-06-2011 03:40 PM |
Removing Swirl Marks using a Flex and Meguiars M105/M205 | Angelo@Autopia | Cosmetic Maintenance: Washing, Waxing, Detailing, Bodywork, Protection | 5 | 05-22-2010 10:36 PM |