Iowa Members Get In Here! - Page 343 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

xtreme2s · 11-15-2012, 12:13 PM

Is anyone going to the Muscla Car Nationals car show this weekend at the Donald P Stevens Center, Rosemont Ill (by O'hare airport)

BenningJ · 11-15-2012, 12:28 PM

Quote:

Originally Posted by pwrmanpaul66

Congrats on the early christmas Tim ! And Jason glad you were able to get the shifter included in purchase of car now the wait ! Are you planning on this being your dd too ? Congats go out to OVERPAR73 also for making forums front page ! Just got back from Karls performance got the dyno done ill post copies of printout later when Kathy gets home printer is acting up but numbers were good for a completely stock car pull # 1 337 rwhp and 335 trq # 2 338 rwhp 341 trq he then let it cool down for a bit then pull # 3 351 rwhp and 347 trq thanks goes out to JD for coming out and watching the pulls with me ! I will try and post the link for the video as soon as they get it up or sent to my e mail !

It is going to be my DD outside of winter. Yeah, the wait is killing me!

Pretty solid numbers Paul. I bet if the kept going it would have been higher. What did the dyno run cost you?

pwrmanpaul66 · 11-15-2012, 12:57 PM

I got in on the discounted price for sighning up on sat during grand opening but it cost $ 100.00 Mine was $ 50.00 !

pwrmanpaul66 · 11-15-2012, 01:05 PM

I wish i could figure out how to post a video from my phone that i took of the dyno pulls !

toesuf94 · 11-15-2012, 01:42 PM

Paul: Who should I contact at Karl's? I need to make an appointment to get my car tuned. I do not like the current Edelbrock canned tune that is in there.

pwrmanpaul66 · 11-15-2012, 01:55 PM

Scott contact Ryan Vitinitta contact # 515 963 7197 or office # 888 771 5574 be sure that you tell him i recomended them great people !

rberns · 11-15-2012, 06:21 PM

INDY500,

Has your wife said anything yet if the DOT has started laying down any brine mix yet? I know last year they started spraying the bridges really early.

pwrmanpaul66 · 11-15-2012, 06:53 PM

Ok i hope this works here is a link to my last run !

xtreme2s · 11-15-2012, 08:50 PM

Nice video Paul. - plus thats interesting that the dyno also spins front drum as well -my first time seeing a 4 wheel dyno in use, and didn't notice that during the demo's at the open house

pwrmanpaul66 · 11-15-2012, 09:19 PM

Thanks Tim it is a pretty kool set up they have ! Scott if you go to karl performance on facebook scroll down and open the see more recent entries there is a red 2010 that they dynoed and i believe that they tuned cant say for sure but check it out it also had an E Force on it !

BenningJ · 11-15-2012, 10:21 PM

Well I took everything out today. Completely back to stock form!

its a syn · 11-16-2012, 08:22 AM

Since everyone is posting up thier latest mods I better post mine. Had weight reduction done to the Camaro yesterday in the form of having my gall bladder removed. Should be good for a .01!!

Would not recommend this mod though, SOB am I sore this morning. Atleast when I start to get feeling better I'll have some time to enjoy the nice weather and go cruisin' around in the Camaro. I guess the soreness should be expected seeing as my surgeon drives a 2009 Mustang convertible!!!Atleast I am up and moving and not

BenningJ · 11-16-2012, 08:26 AM

Damn dude. Hope you feel better soon. I did the anti-mod haha .

its a syn · 11-16-2012, 08:30 AM

Quote:

Originally Posted by BenningJ

Damn dude. Hope you feel better soon. I did the anti-mod haha .

Should be fine just have to take it easy for the next 10 days. Try and get some light duty work lined up. Gonna try and have them up my Vicaden perscription so I feel no pain!!!

11-15-2012, 12:57 PM	#4791
pwrmanpaul66 Drives: 2016 2/SS 6 spd Dual Mode Join Date: Jun 2011 Location: DSM, IA Posts: 996 View My Garage	I got in on the discounted price for sighning up on sat during grand opening but it cost $ 100.00 Mine was $ 50.00 ! __________________

11-15-2012, 01:05 PM	#4792
pwrmanpaul66 Drives: 2016 2/SS 6 spd Dual Mode Join Date: Jun 2011 Location: DSM, IA Posts: 996 View My Garage	I wish i could figure out how to post a video from my phone that i took of the dyno pulls ! __________________

11-15-2012, 01:42 PM	#4793
toesuf94 Drives: THR #11 E-force supercharged Join Date: Jul 2008 Location: Cedar Rapids, IA Posts: 4,746	Paul: Who should I contact at Karl's? I need to make an appointment to get my car tuned. I do not like the current Edelbrock canned tune that is in there. __________________ Cars and women are both going to give you problems...but you can pay somebody else to fix your car!

11-15-2012, 01:55 PM	#4794
pwrmanpaul66 Drives: 2016 2/SS 6 spd Dual Mode Join Date: Jun 2011 Location: DSM, IA Posts: 996 View My Garage	Scott contact Ryan Vitinitta contact # 515 963 7197 or office # 888 771 5574 be sure that you tell him i recomended them great people ! __________________

11-15-2012, 06:21 PM	#4795
rberns Drives: 2011 Camaro 2SS/RS Join Date: Apr 2011 Location: US Posts: 3,291 View My Garage	INDY500, Has your wife said anything yet if the DOT has started laying down any brine mix yet? I know last year they started spraying the bridges really early. __________________ 2011 Camaro 2SS/RS, Circle D 3200, ADM Transmission Cooler, BTR Valvetrain, Cam Motion .621 .595 228/244 113+4, ARH 1 7/8 full exhaust, Cold Air Inductions, Katech C5R TC, Melling HV, BTR SLR lifters, Trunion Upgrade, LS2 Dampner, LS9 head gaskets, Bo White PTB, MM can, GFX, Subs, B&M Deep transmission pan, Holley fuel rail, Proform valve covers, relocated coil packs

11-15-2012, 12:13 PM	#4789
xtreme2s Drives: Livernois Motorsports 2010 2SS/RS Join Date: Feb 2012 Location: Iowa Posts: 445 View My Garage	Is anyone going to the Muscla Car Nationals car show this weekend at the Donald P Stevens Center, Rosemont Ill (by O'hare airport)

11-15-2012, 08:50 PM	#4797
xtreme2s Drives: Livernois Motorsports 2010 2SS/RS Join Date: Feb 2012 Location: Iowa Posts: 445 View My Garage	Nice video Paul. - plus thats interesting that the dyno also spins front drum as well -my first time seeing a 4 wheel dyno in use, and didn't notice that during the demo's at the open house

11-15-2012, 09:19 PM	#4798
pwrmanpaul66 Drives: 2016 2/SS 6 spd Dual Mode Join Date: Jun 2011 Location: DSM, IA Posts: 996 View My Garage	Thanks Tim it is a pretty kool set up they have ! Scott if you go to karl performance on facebook scroll down and open the see more recent entries there is a red 2010 that they dynoed and i believe that they tuned cant say for sure but check it out it also had an E Force on it ! __________________

11-15-2012, 10:21 PM	#4799
BenningJ Drives: 2013 AGM 1SS/RS LS3 Join Date: Mar 2011 Location: Cedar Falls, Iowa Posts: 1,581 View My Garage	Well I took everything out today. Completely back to stock form! Attached Images __________________ 2013 Camaro 1SS/RS - Ashen Gray Metallic \| LS3 \| CAI Inductions, Inc Intake \| Vmax Ported Throttle Body \| Dynatech 1.875" Long Tube Headers \| Apex Scoop & Washer Bottle Relocation \| Lethal Racing Night Fury Cam \| BTR 7.400" Push Rods \|LS2 Dampener \| Melling 10296 Oil Pump \| IWIS Chain \| BTR .660" Dual Valve Springs \| BTR Trunion Upgrade Kit \| Lethal Racing Tuned \| Anvil Notch Spoiler \| BMR Split Drop Springs \| Eaton TrueTrac \| GM 3.91 Gears \| LPW Diff Cover \| Rohana RF2 275/40 20x10F 315/35 20x11R \| BMR Polyurethane Motor Mounts

11-16-2012, 08:22 AM	#4800
its a syn B.O.D. 02/16/10 Drives: 2010 SGM Sp. Edition 2017 RS Conver Join Date: Jun 2010 Location: Albia,Iowa Posts: 3,959 View My Garage	Since everyone is posting up thier latest mods I better post mine. Had weight reduction done to the Camaro yesterday in the form of having my gall bladder removed. Should be good for a .01!!Would not recommend this mod though, SOB am I sore this morning. Atleast when I start to get feeling better I'll have some time to enjoy the nice weather and go cruisin' around in the Camaro. I guess the soreness should be expected seeing as my surgeon drives a 2009 Mustang convertible!!!Atleast I am up and moving and not __________________

11-16-2012, 08:26 AM	#4801
BenningJ Drives: 2013 AGM 1SS/RS LS3 Join Date: Mar 2011 Location: Cedar Falls, Iowa Posts: 1,581 View My Garage	Damn dude. Hope you feel better soon. I did the anti-mod haha . __________________ 2013 Camaro 1SS/RS - Ashen Gray Metallic \| LS3 \| CAI Inductions, Inc Intake \| Vmax Ported Throttle Body \| Dynatech 1.875" Long Tube Headers \| Apex Scoop & Washer Bottle Relocation \| Lethal Racing Night Fury Cam \| BTR 7.400" Push Rods \|LS2 Dampener \| Melling 10296 Oil Pump \| IWIS Chain \| BTR .660" Dual Valve Springs \| BTR Trunion Upgrade Kit \| Lethal Racing Tuned \| Anvil Notch Spoiler \| BMR Split Drop Springs \| Eaton TrueTrac \| GM 3.91 Gears \| LPW Diff Cover \| Rohana RF2 275/40 20x10F 315/35 20x11R \| BMR Polyurethane Motor Mounts

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Properautocare Coupon Sale for Camaro5 Members	Angelo@Autopia	Wash/Wax/Detailing and Cosmetic Maintenance Parts	2	12-11-2009 09:38 AM
STS Turbo - Exclusive Offer for Camaro 5 Members - Ends Oct 10th!!!	ZZcamaro	Forced Induction	64	10-19-2009 12:16 PM
Messages to more than 5 members & Social Groups	heinzd01	Site Related Announcements / Suggestions / Feedback / Questions	5	09-16-2009 08:22 AM