Iowa Members Get In Here! - Page 344 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

toesuf94 · 11-16-2012, 08:52 AM

Syn...way to take the weight reduction to the extreme!!

Paul: Ryan is calling me back as to when they can get me on the dyno and get her tuned. Cannot wait!

xtreme2s · 11-16-2012, 12:12 PM

Quote:

Originally Posted by HRD_WRK

Jason-- that was good to put everything back and say your goodbyes- hopefully no extra pieces parts leftover

I forgot- Santa stuffed something in my stocking too:

Why thaaat there looks like one o them para chute brackets for dem drag racin fellers!!

toesuf94 · 11-16-2012, 02:32 PM

I am going to be scared of Tim's beast when he is done! That makes two Tim's to fear on here!

BenningJ · 11-16-2012, 03:21 PM

Subframe connector/tunnel brace, I think.

its a syn · 11-16-2012, 04:42 PM

Quote:

Originally Posted by HRD_WRK

BAZINGA Jason-see pic

Taking in the headers tommorrow (thanks Dennis) for ceramic coating for lower bay/radiant temps and better long term looks for car shows.

Everyone enjoy some good engine air this weekend

-

That's purdy Tim.

rberns · 11-16-2012, 06:35 PM

Just got the engine oil change and stabil put in the tank. Cleaned the inside and tomorrow i will be detailing the outside and engine bay. After that I am putting her away for the year with 2900 miles.

BenningJ · 11-16-2012, 07:32 PM

Ryan, I bet I will have more miles than you by the end of summer. Haha.

pwrmanpaul66 · 11-16-2012, 08:01 PM

Quote:

Originally Posted by BenningJ

Ryan, I bet I will have more miles than you by the end of summer. Haha.

I allready have him beat had it 3 months and ive got 3,600 around there but i bought it to drive !!!!!

pwrmanpaul66 · 11-16-2012, 08:28 PM

Ok finaly got printer scanner working ill put up the printouts from the dyno runs !

pwrmanpaul66 · 11-16-2012, 08:50 PM

I got a call from dealer today to come look at new car they got in im like i have a new car allready dont need another so i went anyway curiosity got the best of me hmmm

I get there and what do i see ?

Look at what was in drivers door for a minute i was thinking joy ride !!!!!!

BenningJ · 11-17-2012, 08:55 AM

I thought really hard about getting the 1LE option. It is an awesome package. I just couldn't see spending $1825 every 6 months on tires. Compound is too soft for the amount of driving I do and combined with the shitty roads here. I figured I could get a 3.91 gear, better struts and sway bars for cheaper

xtreme2s · 11-17-2012, 10:16 AM

Quote:

Originally Posted by BenningJ

I thought really hard about getting the 1LE option. It is an awesome package. I just couldn't see spending $1825 every 6 months on tires. Compound is too soft for the amount of driving I do and combined with the shitty roads here. I figured I could get a 3.91 gear, better struts and sway bars for cheaper

Are the tires on the 1LE same/simular to ZL1's? I think in reading threwads, the ZL1 tires are temperature sensitive, for usage and storage.

BenningJ · 11-17-2012, 10:59 AM

Yeah I believe they are the same. Goodyear eagle F2 supercar tires.

BradsLLT1 · 11-18-2012, 08:04 AM

He guys i am wanting to trade out my aftermarket rims for stock polished rims. you can find my post on the camaro5 forum under wheels/tires labeled WTT aftermarket rims for Camaro SS rims. I am just wanting to go back to a more original look for the camaro and was seeing if anyone in IA would trade. Thanks guys and let me know. you can text or call also at 3194232126.

Thanks again

Brad

11-16-2012, 08:52 AM	#4803
toesuf94 Drives: THR #11 E-force supercharged Join Date: Jul 2008 Location: Cedar Rapids, IA Posts: 4,746	Syn...way to take the weight reduction to the extreme!! Paul: Ryan is calling me back as to when they can get me on the dyno and get her tuned. Cannot wait! __________________ Cars and women are both going to give you problems...but you can pay somebody else to fix your car!

11-16-2012, 02:32 PM	#4805
toesuf94 Drives: THR #11 E-force supercharged Join Date: Jul 2008 Location: Cedar Rapids, IA Posts: 4,746	I am going to be scared of Tim's beast when he is done! That makes two Tim's to fear on here! __________________ Cars and women are both going to give you problems...but you can pay somebody else to fix your car! Last edited by toesuf94; 11-16-2012 at 02:49 PM.

11-16-2012, 03:21 PM	#4806
BenningJ Drives: 2013 AGM 1SS/RS LS3 Join Date: Mar 2011 Location: Cedar Falls, Iowa Posts: 1,581 View My Garage	Subframe connector/tunnel brace, I think. __________________ 2013 Camaro 1SS/RS - Ashen Gray Metallic \| LS3 \| CAI Inductions, Inc Intake \| Vmax Ported Throttle Body \| Dynatech 1.875" Long Tube Headers \| Apex Scoop & Washer Bottle Relocation \| Lethal Racing Night Fury Cam \| BTR 7.400" Push Rods \|LS2 Dampener \| Melling 10296 Oil Pump \| IWIS Chain \| BTR .660" Dual Valve Springs \| BTR Trunion Upgrade Kit \| Lethal Racing Tuned \| Anvil Notch Spoiler \| BMR Split Drop Springs \| Eaton TrueTrac \| GM 3.91 Gears \| LPW Diff Cover \| Rohana RF2 275/40 20x10F 315/35 20x11R \| BMR Polyurethane Motor Mounts Last edited by BenningJ; 11-16-2012 at 04:44 PM.

11-16-2012, 06:35 PM	#4808
rberns Drives: 2011 Camaro 2SS/RS Join Date: Apr 2011 Location: US Posts: 3,291 View My Garage	Just got the engine oil change and stabil put in the tank. Cleaned the inside and tomorrow i will be detailing the outside and engine bay. After that I am putting her away for the year with 2900 miles. __________________ 2011 Camaro 2SS/RS, Circle D 3200, ADM Transmission Cooler, BTR Valvetrain, Cam Motion .621 .595 228/244 113+4, ARH 1 7/8 full exhaust, Cold Air Inductions, Katech C5R TC, Melling HV, BTR SLR lifters, Trunion Upgrade, LS2 Dampner, LS9 head gaskets, Bo White PTB, MM can, GFX, Subs, B&M Deep transmission pan, Holley fuel rail, Proform valve covers, relocated coil packs

11-16-2012, 07:32 PM	#4809
BenningJ Drives: 2013 AGM 1SS/RS LS3 Join Date: Mar 2011 Location: Cedar Falls, Iowa Posts: 1,581 View My Garage	Ryan, I bet I will have more miles than you by the end of summer. Haha. __________________ 2013 Camaro 1SS/RS - Ashen Gray Metallic \| LS3 \| CAI Inductions, Inc Intake \| Vmax Ported Throttle Body \| Dynatech 1.875" Long Tube Headers \| Apex Scoop & Washer Bottle Relocation \| Lethal Racing Night Fury Cam \| BTR 7.400" Push Rods \|LS2 Dampener \| Melling 10296 Oil Pump \| IWIS Chain \| BTR .660" Dual Valve Springs \| BTR Trunion Upgrade Kit \| Lethal Racing Tuned \| Anvil Notch Spoiler \| BMR Split Drop Springs \| Eaton TrueTrac \| GM 3.91 Gears \| LPW Diff Cover \| Rohana RF2 275/40 20x10F 315/35 20x11R \| BMR Polyurethane Motor Mounts

11-16-2012, 08:28 PM	#4811
pwrmanpaul66 Drives: 2016 2/SS 6 spd Dual Mode Join Date: Jun 2011 Location: DSM, IA Posts: 996 View My Garage	Ok finaly got printer scanner working ill put up the printouts from the dyno runs ! Attached Images __________________

11-16-2012, 08:50 PM	#4812
pwrmanpaul66 Drives: 2016 2/SS 6 spd Dual Mode Join Date: Jun 2011 Location: DSM, IA Posts: 996 View My Garage	I got a call from dealer today to come look at new car they got in im like i have a new car allready dont need another so i went anyway curiosity got the best of me hmmm I get there and what do i see ? Look at what was in drivers door for a minute i was thinking joy ride !!!!!! Attached Images __________________

11-17-2012, 08:55 AM	#4813
BenningJ Drives: 2013 AGM 1SS/RS LS3 Join Date: Mar 2011 Location: Cedar Falls, Iowa Posts: 1,581 View My Garage	I thought really hard about getting the 1LE option. It is an awesome package. I just couldn't see spending $1825 every 6 months on tires. Compound is too soft for the amount of driving I do and combined with the shitty roads here. I figured I could get a 3.91 gear, better struts and sway bars for cheaper __________________ 2013 Camaro 1SS/RS - Ashen Gray Metallic \| LS3 \| CAI Inductions, Inc Intake \| Vmax Ported Throttle Body \| Dynatech 1.875" Long Tube Headers \| Apex Scoop & Washer Bottle Relocation \| Lethal Racing Night Fury Cam \| BTR 7.400" Push Rods \|LS2 Dampener \| Melling 10296 Oil Pump \| IWIS Chain \| BTR .660" Dual Valve Springs \| BTR Trunion Upgrade Kit \| Lethal Racing Tuned \| Anvil Notch Spoiler \| BMR Split Drop Springs \| Eaton TrueTrac \| GM 3.91 Gears \| LPW Diff Cover \| Rohana RF2 275/40 20x10F 315/35 20x11R \| BMR Polyurethane Motor Mounts

11-17-2012, 10:59 AM	#4815
BenningJ Drives: 2013 AGM 1SS/RS LS3 Join Date: Mar 2011 Location: Cedar Falls, Iowa Posts: 1,581 View My Garage	Yeah I believe they are the same. Goodyear eagle F2 supercar tires. __________________ 2013 Camaro 1SS/RS - Ashen Gray Metallic \| LS3 \| CAI Inductions, Inc Intake \| Vmax Ported Throttle Body \| Dynatech 1.875" Long Tube Headers \| Apex Scoop & Washer Bottle Relocation \| Lethal Racing Night Fury Cam \| BTR 7.400" Push Rods \|LS2 Dampener \| Melling 10296 Oil Pump \| IWIS Chain \| BTR .660" Dual Valve Springs \| BTR Trunion Upgrade Kit \| Lethal Racing Tuned \| Anvil Notch Spoiler \| BMR Split Drop Springs \| Eaton TrueTrac \| GM 3.91 Gears \| LPW Diff Cover \| Rohana RF2 275/40 20x10F 315/35 20x11R \| BMR Polyurethane Motor Mounts

11-18-2012, 08:04 AM	#4816
BradsLLT1 Drives: Camaro 2010 SS Join Date: Apr 2012 Location: Cedar Rapids,Iowa Posts: 55 View My Garage	He guys i am wanting to trade out my aftermarket rims for stock polished rims. you can find my post on the camaro5 forum under wheels/tires labeled WTT aftermarket rims for Camaro SS rims. I am just wanting to go back to a more original look for the camaro and was seeing if anyone in IA would trade. Thanks guys and let me know. you can text or call also at 3194232126. Thanks again Brad

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Properautocare Coupon Sale for Camaro5 Members	Angelo@Autopia	Wash/Wax/Detailing and Cosmetic Maintenance Parts	2	12-11-2009 09:38 AM
STS Turbo - Exclusive Offer for Camaro 5 Members - Ends Oct 10th!!!	ZZcamaro	Forced Induction	64	10-19-2009 12:16 PM
Messages to more than 5 members & Social Groups	heinzd01	Site Related Announcements / Suggestions / Feedback / Questions	5	09-16-2009 08:22 AM