Plasti-dip =) - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

on3fastss · 12-14-2012, 10:58 AM

Gotta love this stuff its awesome!

Before

After

Sent from my DROID RAZR using Tapatalk 2

MackMan · 12-14-2012, 01:49 PM

Welcome to your new addiction! Lol. Love this stuff.

Forte · 12-14-2012, 04:10 PM

Good work! Yup, i started this way too... Then I did the lettering, another bowtie, the taillight bezels... next is fuel door and front fascia in front of headlights!

JustRaf · 12-14-2012, 04:31 PM

For how long you have to wait to dry?

on3fastss · 12-14-2012, 05:38 PM

Quote:

Originally Posted by JustRaf

For how long you have to wait to dry?

Couple coats every 10min and let dry over night. Dont try to rush dry it with a heat gun it will shrink on you..

Sent from my DROID RAZR using Tapatalk 2

on3fastss · 12-14-2012, 05:44 PM

Still need to dip the rear bowtie, did you guys take off or mask it up good and spray it with the bowtie on the car?

Sent from my DROID RAZR using Tapatalk 2

Hayden · 12-15-2012, 10:54 PM

Quote:

Originally Posted by on3fastss

Still need to dip the rear bowtie, did you guys take off or mask it up good and spray it with the bowtie on the car?

Sent from my DROID RAZR using Tapatalk 2

Just mask off, this stuff is amazing if you checkout youtube channel DipYourCar you will see that its easier to screw up when you try to mask incredibly detailed by the dip drying to the tape.

on3fastss · 12-17-2012, 05:37 PM

Finished the rear bowtie! Came out good.
Taped off

After

Stuff is amazingly cool

whats next :what:

Sent from my DROID RAZR using Tapatalk 2

Jerry7297 · 12-17-2012, 08:32 PM

Love the stuff also. Thinking about doing my rims....

Camaroblk · 12-17-2012, 08:34 PM

Quote:

Originally Posted by Jerry7297

Love the stuff also. Thinking about doing my rims....

Did u get sharp lines edge?

Jerry7297 · 12-17-2012, 09:00 PM

Quote:

Originally Posted by Camaroblk

Did u get sharp lines edge?

The edges were pretty sharp. What I did was laydown the painters tape for an edge. One light coat, wait 20 minutes then one heavy coat then remove the tape. wait 30 minutes. Re-tape off the edge and do another light coat and heavy coat and remove immediately. Came out good. Actually now not seen in this pic I added a red pinstripe and the edge is perfect.

Camaroblk · 12-17-2012, 10:34 PM

Quote:

Originally Posted by Jerry7297

The edges were pretty sharp. What I did was laydown the painters tape for an edge. One light coat, wait 20 minutes then one heavy coat then remove the tape. wait 30 minutes. Re-tape off the edge and do another light coat and heavy coat and remove immediately. Came out good. Actually now not seen in this pic I added a red pinstripe and the edge is perfect.

thanks for the info , so u took the tape while its still wet ?

also can u take a close pic to the line ? if u dont mind ?

thanks

BAWLZ SS · 12-18-2012, 09:28 AM

looks good!

nyrfan · 12-18-2012, 09:39 AM

It is not at all necessary to tape of any part of the emblem. Once the spray is dry you can peel of the part you want (inside or outside) with no issues. The gap makes the break perfect.

12-14-2012, 10:58 AM	#1
on3fastss Drives: 2010 Camaro SS\RS Join Date: Jun 2012 Location: socal Posts: 160	Plasti-dip =) Gotta love this stuff its awesome! Before After Sent from my DROID RAZR using Tapatalk 2

12-18-2012, 09:28 AM	#13
BAWLZ SS Drives: '10 Camaro LS3 2SS/RS, 1968 Nova Join Date: Aug 2010 Location: California Posts: 972	looks good! __________________ Performance- Kooks Headers w/HF cats, ZL1 Corsa exhaust, VMax, CAI Inc. CAI, MGW shifter, RX CC Suspension - KW V3 Coilovers/ Full PFADT & BMR suspension Appearance - ZL1 Fascia/Sides/ Diffuser, AAC Afterburners, RK Sport 3pc Spoiler, SLP Black out Kit

12-18-2012, 09:39 AM	#14
nyrfan Let's go Rangers! Drives: 13' AGM 2SS/RS L99 Join Date: Jun 2011 Location: Orlando, FL Posts: 10,742 View My Garage	It is not at all necessary to tape of any part of the emblem. Once the spray is dry you can peel of the part you want (inside or outside) with no issues. The gap makes the break perfect. __________________ Soprano 4/1/00-6/14/11, Gone but NEVER forgotten! FSP tuned: 377/389

12-14-2012, 01:49 PM	#2
MackMan Camaro CRAZY Drives: 2019 OC 1SS/1LE Join Date: Apr 2011 Location: Winchester, KY Posts: 3,202 View My Garage	Welcome to your new addiction! Lol. Love this stuff.

12-14-2012, 04:10 PM	#3
Forte Drives: 2011 2LT/RS CGM W/ Black Stripes Join Date: Jul 2012 Location: Madera, CA Posts: 598	Good work! Yup, i started this way too... Then I did the lettering, another bowtie, the taillight bezels... next is fuel door and front fascia in front of headlights!

12-14-2012, 04:31 PM	#4
JustRaf YOU.ONLY.LIVE.ONCE Drives: Camaro 2LT/RS 2013 Join Date: Aug 2012 Location: Central CA Posts: 874	For how long you have to wait to dry?

12-14-2012, 05:44 PM	#6
on3fastss Drives: 2010 Camaro SS\RS Join Date: Jun 2012 Location: socal Posts: 160	Still need to dip the rear bowtie, did you guys take off or mask it up good and spray it with the bowtie on the car? Sent from my DROID RAZR using Tapatalk 2

12-17-2012, 05:37 PM	#8
on3fastss Drives: 2010 Camaro SS\RS Join Date: Jun 2012 Location: socal Posts: 160	Finished the rear bowtie! Came out good. Taped off After Stuff is amazingly cool whats next :what: Sent from my DROID RAZR using Tapatalk 2

12-17-2012, 08:32 PM	#9
Jerry7297 Drives: 2018 2SS/ 1LE Join Date: Sep 2012 Location: San Marcos TX Posts: 710 View My Garage	Love the stuff also. Thinking about doing my rims....