sjm autoprod - Concept Afterburner Tail Lights - Page 71 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

sjmautoprod · 09-21-2013, 08:12 PM

Email it to him!

UF4LIFE102SS · 09-21-2013, 08:15 PM

Here u go.

Elykson · 09-21-2013, 08:45 PM

Well, I snapped the 3rd lense at the corner. This is on my girlfriends camaro, so I guess I'll just grab my 2nd set of tail lights and dremel those off later. Her car is the guinea pig, before I start on mine!

UF4LIFE102SS · 09-21-2013, 08:50 PM

Quote:

Originally Posted by Elykson

Well, I snapped the 3rd lense at the corner. This is on my girlfriends camaro, so I guess I'll just grab my 2nd set of tail lights and dremel those off later. Her car is the guinea pig, before I start on mine!

Mine r not perfect but thanks to my tile buddy for cutting them open!

agkelly73 · 09-23-2013, 08:23 AM

Everyone, here are some pics from the double install I did this weekend. Silver one is mine and the Red Jewel my friend’s. I still have to get flicker sorted out and all hooked up and it was getting late last night so that’s postponed until later this week for now. Absolutely love the look of this kit. Thanks again Tony for developing this and getting the look right! Enjoy!

To make it a little easier to get the lamps out with two sets I decided to remove both the bumpers.

I decided to use a Dremel to open these up. I’m more used to that method from installing other types of “afterburners”.

Grinding out the inner lens welds. Of note on both sets I did, once I got the top two welds broke I was able to just pry the lens out and pop the bottom weld without having to grind it out.

A set of four with the light modules installed and drying.

Test fitting the diffusers.

Set of four with diffusers installed and drying.

Lights installed and bumper back on!

Side by side from a distance.

yotaman96 · 09-23-2013, 09:00 AM

Nice work. That last pic is sweet.

sjmautoprod · 09-23-2013, 09:49 AM

Nice job and post!

agkelly73 · 09-23-2013, 09:51 AM

Quote:

Originally Posted by yotaman96

Nice work. That last pic is sweet.

Yeah they look evil as hell!

Sent from my zombie apocalypse bunker using my Droid RAZR HD.

agkelly73 · 09-23-2013, 09:52 AM

Quote:

Originally Posted by sjmautoprod

Nice job and post!

Thanks Tony!

Sent from my zombie apocalypse bunker using my Droid RAZR HD.

goshawk823 · 09-23-2013, 09:55 AM

damn, they look sweet. great job.
Tony - when are you going to see complete replacement lights?

sjmautoprod · 09-23-2013, 10:41 AM

We are almost to the point of being able to come up with a price for complete kits. Need to first nail down some supplier issues that came up during this run.

Just be aware that a stock lamp MSRP is ~$100.

linkwpc · 09-23-2013, 11:04 AM

Quote:

Originally Posted by sjmautoprod

We are almost to the point of being able to come up with a price for complete kits. Need to first nail down some supplier issues that came up during this run.

Just be aware that a stock lamp MSRP is ~$100.

About time

spectre20 · 09-24-2013, 09:21 PM

Very interesting...
I want!

Jbcamaro · 09-25-2013, 03:18 AM

Those pictures make me wish I would have got the light diffusers

I see now how they look more like the concept

09-21-2013, 08:15 PM	#982
UF4LIFE102SS Treasure Coast Camaro 5 Drives: 2010 2 SS Join Date: Nov 2010 Location: Vero Beach, FL. Posts: 4,239 View My Garage	Here u go. __________________

09-21-2013, 08:45 PM	#983
Elykson Custom One Off Drives: 2010 Chicago Blackhawks Edition #1 Join Date: Oct 2010 Location: Madhouse on Madison Posts: 1,190	Well, I snapped the 3rd lense at the corner. This is on my girlfriends camaro, so I guess I'll just grab my 2nd set of tail lights and dremel those off later. Her car is the guinea pig, before I start on mine! __________________ Vararam Intake/SLP Loud Mouth II/BBK LT HFC/Magnaflow x-pipe/Pfadt Springs/Black Ice-olator/FE3 suspension/VMAX TB/RX catch can/Trifecta Tune http://www.camaro5.com/forums/showthread.php?t=129416

09-23-2013, 08:23 AM	#985
agkelly73 Drives: 2016 SS Convertible Join Date: Jun 2009 Location: Hope Mills, NC Posts: 419	DOUBLE Afterburner Install! Everyone, here are some pics from the double install I did this weekend. Silver one is mine and the Red Jewel my friend’s. I still have to get flicker sorted out and all hooked up and it was getting late last night so that’s postponed until later this week for now. Absolutely love the look of this kit. Thanks again Tony for developing this and getting the look right! Enjoy! To make it a little easier to get the lamps out with two sets I decided to remove both the bumpers. I decided to use a Dremel to open these up. I’m more used to that method from installing other types of “afterburners”. Grinding out the inner lens welds. Of note on both sets I did, once I got the top two welds broke I was able to just pry the lens out and pop the bottom weld without having to grind it out. A set of four with the light modules installed and drying. Test fitting the diffusers. Set of four with diffusers installed and drying. Lights installed and bumper back on! Side by side from a distance.

09-23-2013, 09:00 AM	#986
yotaman96 Drives: 2017 Camaro SS1LE 2000 Trans Am WS6 Join Date: Jul 2008 Location: Portland, TN Posts: 2,955 View My Garage	Nice work. That last pic is sweet. __________________ 2017 Krypton Green SS 1LE Magnacharged 2000 Trans Am WS6 manual trans 2002 Trans Am 2015 Ram Crew Cab Cummins

09-23-2013, 09:55 AM	#990
goshawk823 Drives: 2017 RS convertible Join Date: May 2009 Location: New Kent, Virginia Posts: 837	damn, they look sweet. great job. Tony - when are you going to see complete replacement lights? __________________ Camaros I've owned: 1969 RS/SS Z10 Indy Pace Car - Hardtop 1 of 250 1970 Camaro 2010 2LT RS 2013 2SS RS Current ride: 2017 Camaro 2LT RS convertible

09-21-2013, 08:12 PM	#981
sjmautoprod Drives: '16 2SS Join Date: Apr 2011 Location: Chicago Suburbs Posts: 2,271	Email it to him!

09-23-2013, 09:49 AM	#987
sjmautoprod Drives: '16 2SS Join Date: Apr 2011 Location: Chicago Suburbs Posts: 2,271	Nice job and post!

09-23-2013, 10:41 AM	#991
sjmautoprod Drives: '16 2SS Join Date: Apr 2011 Location: Chicago Suburbs Posts: 2,271	We are almost to the point of being able to come up with a price for complete kits. Need to first nail down some supplier issues that came up during this run. Just be aware that a stock lamp MSRP is ~$100.

09-24-2013, 09:21 PM	#993
spectre20 Drives: 2013 2SS RS Join Date: Nov 2010 Location: San Antonio, TX Posts: 18	Very interesting... I want! __________________ \| Vararam Intake \| Heritage Grill \|

09-25-2013, 03:18 AM	#994
Jbcamaro Drives: 2010 camaro Join Date: May 2010 Location: golden,ms Posts: 174	Those pictures make me wish I would have got the light diffusers I see now how they look more like the concept

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
AAC afterburner tail lights	Berryp	Cosmetics and Lighting Modification Discussions	28	01-28-2012 04:18 PM
AAC's Afterburner Tail Lights	The Stig	Cosmetics and Lighting Modification Discussions	32	05-17-2011 02:42 PM
AAC Afterburner Tail Lights! PICS!	TXGooch21	Cosmetics and Lighting Modification Discussions	23	10-20-2010 09:47 AM
New tail lights?	2000v6	4th Generation Camaros	40	03-17-2010 03:07 AM