Trans swap - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

jw2005vtx · 02-18-2014, 08:30 AM

Wanting to put a 700R4 back in a 92 Camaro. The car has a built 350 with a 350 turbo trans. The PO said the turbo trans is a short tail shaft trans. Would I have to get a different driveshaft for the 700R4? How hard would it also be to hook the detent cable back up with the 350 thats carbuerated?

Obsessive Camaro Disorder · 02-22-2014, 08:02 PM

Yes the 350 is shorter and should have a custom/aftermarket crossmember and an extended driveshaft. Shouldn't be a big deal to get a stock crossmember and driveshaft.

I'm not sure about the cable. Should hook up to the carb fine i would think.

02-18-2014, 08:30 AM	#1
jw2005vtx Drives: 92 Black Camaro, Love it. Join Date: Jan 2014 Location: United States Posts: 10	Trans swap Wanting to put a 700R4 back in a 92 Camaro. The car has a built 350 with a 350 turbo trans. The PO said the turbo trans is a short tail shaft trans. Would I have to get a different driveshaft for the 700R4? How hard would it also be to hook the detent cable back up with the 350 thats carbuerated?

02-22-2014, 08:02 PM	#2
Obsessive Camaro Disorder Drives: 69 Camaro and 92 RS Join Date: Feb 2013 Location: Iowa Posts: 180	Yes the 350 is shorter and should have a custom/aftermarket crossmember and an extended driveshaft. Shouldn't be a big deal to get a stock crossmember and driveshaft. I'm not sure about the cable. Should hook up to the carb fine i would think. __________________ There are 3 ways to do any project. Good, fast, and cheap. You can only choose two. If it's done good and fast, it isn't going to be cheap. If it's done good and cheap, it isn't going to be done fast. If it's done cheap and fast, it isn't going to be good.