10-26-2015, 10:01 AM | #1 |
|
SOLD-Whipple 10 rib pully kit
I have a ATI/Whipple 10 rib pully kit for sale, this will included the water pump with 10 rib pully pre installed, ATI balancer 6%OD and all other pullies needed. The kitcomes with two different supercharger pulleys 3.000 & 3.250, and also includes 2 heavy duty tensioners. One tensioner is 365lbs and the other is 380lbs. $1100+shipping
This will really wake up the Whipple charger. This will be removed from car within next couple weeks.
__________________
Last edited by MudderFinger; 11-23-2015 at 05:30 PM. Reason: Adding more details, SOLD |
10-26-2015, 04:12 PM | #2 |
|
Pictures
Pictures of pullies before installing.
__________________
|
10-26-2015, 07:19 PM | #3 |
Drives: Silver 2010 SS Camaro Join Date: Jul 2009
Location: TN
Posts: 2,562
|
Really good price.
__________________
MODS:
ADM built 417, 2.9L Whipple with 3.250 pulley, ADM ported and polished LSA heads,ADM stage3 cam,ADM LSA belt drive system,ADM CAI race scoop, ADM dual fuel pumps, ID 850's, BMR full suspension, Gforce 9 inch kit with 3.5 inch driveshaft, Street Slayer twin carbon clutch, Lingenfelter oil seperator. Tuned by built by ADM Performance, 763rwhp,705rwtq |
11-02-2015, 02:21 PM | #4 |
Drives: Autobot Join Date: Jan 2015
Location: H-Town
Posts: 230
|
What does the set cost new... what else is needed if you have a NIB tuner kit? and wanted to make a little over 800?
I have injectors.. So just a belt? and CAI?
__________________
|
11-02-2015, 03:45 PM | #5 | |
|
Quote:
However to answer the questions, when I bought the pulley kit new it was $2200 for the pulley kit and another $400 for the heavy duty tensioner at 370lbs. In addition it comes with an extra pulley that cost $150, and a extra heavy duty Dayco tensioner with 385lb that cost $85. So all together all of this would cost $2835 total not counting shipping, so ultimately this is a awesome deal at $1100. This pulley kit with your whipple and a blower cam should be right at 800+. I have a 416 and with this setup I am a little over 800HP, and running 10.0 in the quarter, this is what is required to max out your whipple, it come with a 3.250 & a 3.000 SC pulley, and balancer is 6% overdriven. I can let you know if the deal falls though but the guy is sending me a deposit so I am sure he is sincere about this pruchase. All of the Whipple stuff I have for sale will be pulled off the car this weekend.
__________________
|
|
11-02-2015, 07:17 PM | #6 |
Drives: Camaro Join Date: Sep 2012
Location: FL
Posts: 434
|
If not sold I will take it ASAP Thank You
|
11-02-2015, 07:23 PM | #7 |
Drives: Camaro Join Date: Sep 2012
Location: FL
Posts: 434
|
Will take it if sale doesn't work out and send payment
|
11-03-2015, 01:50 PM | #8 |
|
SALE PENDING with deposit
__________________
|
11-04-2015, 12:11 AM | #9 |
Drives: 11 SS Whipple, Meth, CAM, 625rwhp Join Date: Sep 2011
Location: Easton ma
Posts: 46
|
Any chance you know the part number for the 385lb dayco?
|
11-04-2015, 09:57 AM | #10 |
|
I think I just might, but I will have to get it off the box and can post it. It is exact same tensioner but 15lbs heavier. It will require removing the pulley off the whipple tensioner as it is not quite as wide as the 10rib pulley but almost, it is only one bolt holding on pulley, so its an easy switch out. I will try to post it up here tonight.
__________________
|
11-05-2015, 08:11 AM | #11 |
Drives: Camaro Join Date: Sep 2012
Location: FL
Posts: 434
|
Please again let me know if sale doesn't go through Will take it Thanks
|
11-06-2015, 09:17 PM | #12 |
Drives: 2011 2ss/rs Join Date: Nov 2011
Location: Canada
Posts: 1,431
|
How many people Inline?? LOL
Sent from my iPhone using Tapatalk |
11-07-2015, 06:59 PM | #13 |
Drives: Camaro Join Date: Sep 2012
Location: FL
Posts: 434
|
If guy before me fails it will be heading to Tampa
|
11-07-2015, 07:19 PM | #14 |
Drives: 2011 2ss/rs Join Date: Nov 2011
Location: Canada
Posts: 1,431
|
I was told I was 2nd inline
Sent from my iPhone using Tapatalk |
|
|
|
|