01-20-2016, 04:10 PM | #1 |
Drives: 2015 2LT RS Camaro Join Date: Jan 2013
Location: North Georgia
Posts: 120
|
Where did you mount your bass level control knob?
Directly under the steering wheel? Under the HUD controller? To the left of the MyLink?
|
01-20-2016, 04:26 PM | #2 |
Drives: 2014 ZL1 Join Date: Aug 2015
Location: Tucson AZ
Posts: 217
|
I mounted mine on a screw under the dash near the center console.
|
01-20-2016, 04:30 PM | #3 |
Drives: 2015 2LT RS Camaro Join Date: Jan 2013
Location: North Georgia
Posts: 120
|
|
01-20-2016, 04:40 PM | #4 |
Drives: 2014 ZL1 Join Date: Aug 2015
Location: Tucson AZ
Posts: 217
|
Nope I have had no issues with it there. It is out of sight but I can reach down and make little tweaks real easy. I am sure there are other screws under there that you could put it anywhere along the bottom that works for you.
|
01-20-2016, 07:15 PM | #5 |
Drives: 2011 2SS/RS Join Date: Feb 2014
Location: H-Town
Posts: 1,037
|
Mine is basically in the same place, just on that side panel next to the knee, instead of the underside of the dash
|
01-20-2016, 07:41 PM | #6 |
Drives: 2015 2LT RS Camaro Join Date: Jan 2013
Location: North Georgia
Posts: 120
|
|
01-20-2016, 09:07 PM | #7 |
Drives: 20’ Chevrolet Camaro 2SS 1LE Join Date: Jan 2009
Location: San Diego
Posts: 1,577
|
I had mine inside the center console, taped using 3m double sided. Never came off.
__________________
|
01-21-2016, 10:13 AM | #8 |
Drives: 2011 Inferno Orange Camaro 2SS/RS Join Date: Nov 2011
Location: Pittsburgh, PA
Posts: 1,368
|
Inside Center Console here as well. I don't want to see it
|
01-21-2016, 10:25 AM | #9 |
Drives: 2010 Camaro SGM 1LT M6 Join Date: Jan 2015
Location: Rochester, NY
Posts: 1,630
|
I havent installed my subs in my camaro yet but in my last car I had it mounted between the drivers seat and the center console. I put it there so it was easy to reach incase i had to turn it down near a cop. 1500w rms subs make some illegal level noise lol
__________________
Arkentect's Build Thread!! - UPSTATE C5 MEMBER
2010 SGM M6 1LT - SOLD Current - 2009 C6 Corvette Z51 |
01-21-2016, 12:01 PM | #10 |
Drives: 2015 2LT RS Camaro Join Date: Jan 2013
Location: North Georgia
Posts: 120
|
|
01-22-2016, 03:50 PM | #11 |
THERAPY
|
On top of cup holder
|
01-22-2016, 04:51 PM | #12 |
Drives: 2014 1SS/RS, 2018 Silverado CC Join Date: Apr 2014
Location: Oceanside, CA
Posts: 1,487
|
Here's where I had mine.
__________________
AGP 57/57 turbos and Dual Pump System, NA Cam, McLeod RXT clutch, MGW shifter, ZL1 Rear End, BMR Trailing Arms/Toe Rods, Pegasus Solid Cradle Bushings 10.7 @140mph M6
|
01-22-2016, 06:01 PM | #13 |
Russ
|
Mine fit nicely above the head unit.
|
01-22-2016, 06:50 PM | #14 |
I run 2 catch cans...
|
On my forehead...
__________________
Overkill tuned • Air Scoop • CAI • VMAX PTB • JacFab Laminator FX + Extendolator • SOLO Hi-Flo Cats + Cat-Back Exhaust
View my top 3 LFX performance mods and more: . |
|
|
|
|