03-01-2016, 07:42 PM | #43 |
Drives: 2022 SS 1LE Join Date: Apr 2014
Location: Houston
Posts: 228
|
|
03-01-2016, 09:17 PM | #44 |
Drives: 2022 1SS 1LE A10 BCD WCT+PDR Join Date: Mar 2008
Location: Johnstown, PA
Posts: 3,212
|
Chris1SS1LE, Thanks for the heads up!
__________________
2022 1SS 1LE A10 BCD WCT+PDR2014 1SS 1LE NPP RECARO SIM-SOLD1995 Z28 M6 GSC PGM-SOLD1975 NOVA COUPE 300HP 350 TH350 FLASH RED-SOLD
Last edited by cdb95z28; 03-07-2016 at 02:27 PM. |
03-02-2016, 07:04 AM | #45 |
Drives: 2013 1LE 1SS Victory Red 1 of 76 Join Date: Sep 2008
Location: Indiana
Posts: 425
|
__________________
2013 1SS 1LE Victory Red. 187 CAM-C
|
03-02-2016, 12:06 PM | #46 |
Drives: 2013 2SS (sold) Join Date: Jan 2016
Location: Seattle, WA
Posts: 602
|
So, I have a question. I bought the struts/shocks, and I'll be getting lighter 19" wheels eventually to pair with these. I may not install the shocks/struts until then so I can get a more balanced package to what GM designed for.
Anyways, I'm going to at least try to get swaybars that more match the system. The 2 part numbers I found for front and rear swaybars for the Z/28 are: 22842517: Front 22812943: Rear Does anyone know how these will fit in my 2013 SS? Or if they'll even fit at all? I've looked at a few online retailers, and they show conflicting/different fitments. If they do fit, will I need other stuff (such as the mounts, endlinks, etc)? If they don't fit, do I need something to adapt them to fit maybe? I know the Z28 swaybars are much lighter/softer than the SS and also 1LE swaybars, which is why I don't want to run the SS swaybars with the Z28 shocks/struts.
__________________
Track Parts/Stock Parts Part Out http://www.camaro5.com/forums/showthread.php?t=515534
|
03-02-2016, 12:49 PM | #47 |
Drives: '16 C7 Z51 Join Date: May 2012
Location: Redmond, WA
Posts: 3,056
|
Z/28 sways are direct fit, and they also use the very same endlinks as what my 1LE came with.
__________________
'16 Corvette C7 Z51 1LT (Build Thread)
'14 AGM 1SS 1LE [COTW 11/17/14] (Build Thread) (SOLD) '13 Mazda MX-5 Club (Build Thread) '17 RAM 1500 Crew Cab 4x4 Night Edition '15 Nissan Rogue S AWD |
03-02-2016, 12:56 PM | #48 |
Drives: 2013 2SS (sold) Join Date: Jan 2016
Location: Seattle, WA
Posts: 602
|
Ok thanks. The question I had is if the bar diameters are different, I would need new mounts right? Or do the item numbers I listed come with mounts?
__________________
Track Parts/Stock Parts Part Out http://www.camaro5.com/forums/showthread.php?t=515534
|
03-02-2016, 01:26 PM | #49 |
Drives: '16 C7 Z51 Join Date: May 2012
Location: Redmond, WA
Posts: 3,056
|
My sways came with their mounts already on them, but just so you know, I bought the whole suspension kit, in case it makes any difference.
__________________
'16 Corvette C7 Z51 1LT (Build Thread)
'14 AGM 1SS 1LE [COTW 11/17/14] (Build Thread) (SOLD) '13 Mazda MX-5 Club (Build Thread) '17 RAM 1500 Crew Cab 4x4 Night Edition '15 Nissan Rogue S AWD |
03-03-2016, 02:24 PM | #50 |
Drives: 2013 1LE 1SS Victory Red 1 of 76 Join Date: Sep 2008
Location: Indiana
Posts: 425
|
For a 1LE, besides the bars, are there any other Z28 components do you feel are a must. If I can get away with just the bars I will. Not real excited about dropping the exhaust and cradle if I don't have to. Or am I wrong to assume that?
__________________
2013 1SS 1LE Victory Red. 187 CAM-C
|
03-03-2016, 02:46 PM | #51 |
Drives: 2022 1SS 1LE A10 BCD WCT+PDR Join Date: Mar 2008
Location: Johnstown, PA
Posts: 3,212
|
Front bar is the same as the ZL1, part #22842517, about $100
The bushing part # is 20942228, need 2 of those about $9-10 each We can reuse the bushing mounts.
__________________
2022 1SS 1LE A10 BCD WCT+PDR2014 1SS 1LE NPP RECARO SIM-SOLD1995 Z28 M6 GSC PGM-SOLD1975 NOVA COUPE 300HP 350 TH350 FLASH RED-SOLD
|
03-03-2016, 02:50 PM | #52 | |
Drives: '16 C7 Z51 Join Date: May 2012
Location: Redmond, WA
Posts: 3,056
|
Quote:
Honestly, I don't think anything else is crucial beyond the shocks and the sways. It will work very well with these components, and even better with the addition of others, but you hit the point of diminishing returns, especially if you've already upgraded some of the bushings on your car with stiffer ones.
__________________
'16 Corvette C7 Z51 1LT (Build Thread)
'14 AGM 1SS 1LE [COTW 11/17/14] (Build Thread) (SOLD) '13 Mazda MX-5 Club (Build Thread) '17 RAM 1500 Crew Cab 4x4 Night Edition '15 Nissan Rogue S AWD |
|
03-03-2016, 02:52 PM | #53 |
|
The bar will come with the bushings and clamps on it.
__________________
|
03-05-2016, 02:18 PM | #54 |
Drives: 2022 1SS 1LE A10 BCD WCT+PDR Join Date: Mar 2008
Location: Johnstown, PA
Posts: 3,212
|
Thanks!
__________________
2022 1SS 1LE A10 BCD WCT+PDR2014 1SS 1LE NPP RECARO SIM-SOLD1995 Z28 M6 GSC PGM-SOLD1975 NOVA COUPE 300HP 350 TH350 FLASH RED-SOLD
|
|
|
|
|