10-30-2016, 11:36 AM | #1 |
Drives: 2013 Camaro 1LE 1SS Join Date: Aug 2012
Location: Detroit
Posts: 1,252
|
SOLD - Suede steering wheel for sale
From my 2013 1LE, comes with horn cover but no airbag inside. Suede is in perfect condition and silver trim was painted black, one trim pc has spyder cracks from paint job. Harness for switches was also cut so you would need a new harness, around $20-30 at dealer.
$150 shipped to lower states. PM me if interested. SOLD
__________________
I work for General Motors and am not an official spokes person for General Motors. My views and opinions are my own and not those of General Motors.
Last edited by Mgizzle; 01-15-2017 at 07:59 PM. |
10-30-2016, 04:30 PM | #2 |
Drives: 2010 Camaro 2SS/RS Join Date: Dec 2015
Location: Peru, Indiana
Posts: 114
|
Would you be willing to sell just the airbag cover?
Sent from my iPhone using Tapatalk
__________________
Yes, I am 18. Yes, I drive an SS. No, my parents did NOT pay for it.
|
10-30-2016, 06:13 PM | #3 |
Drives: 2013 Camaro 1LE 1SS Join Date: Aug 2012
Location: Detroit
Posts: 1,252
|
There are no cracks in the trim, its surface cracks in paint. Painted when it was cold so u just have to sand it a bit ifnit bothers you and repaint.
Sent from my iPhone using Tapatalk
__________________
I work for General Motors and am not an official spokes person for General Motors. My views and opinions are my own and not those of General Motors.
Last edited by Mgizzle; 10-30-2016 at 07:07 PM. |
10-31-2016, 09:40 AM | #4 |
Instagram: Sangstah
|
Is this for a manual or automatic car?
__________________
2019 SS 1LE - "CaSSandra" 2014 SS - "AleSSandra - Sold" 94 Z28 - Sold
Follow the build https://www.camaro6.com/forums/showthread.php?t=612717 |
10-31-2016, 10:08 AM | #5 |
Drives: 2013 Camaro SS LS3 Join Date: Sep 2014
Location: In Front of a Mustang
Posts: 111
|
|
10-31-2016, 10:17 AM | #6 |
Instagram: Sangstah
|
Ah didn't catch that, thanks 13HadeSS
__________________
2019 SS 1LE - "CaSSandra" 2014 SS - "AleSSandra - Sold" 94 Z28 - Sold
Follow the build https://www.camaro6.com/forums/showthread.php?t=612717 |
12-07-2016, 04:12 PM | #7 |
Drives: 2013 Camaro 1LE 1SS Join Date: Aug 2012
Location: Detroit
Posts: 1,252
|
BUMP.... cheap suede wheel!
__________________
I work for General Motors and am not an official spokes person for General Motors. My views and opinions are my own and not those of General Motors.
|
12-07-2016, 04:38 PM | #8 |
SoCal HT5
Drives: 2010 SS , 2014 SS Join Date: Sep 2011
Location: Muscat-Oman
Posts: 1,472
|
ill take it if it fits an Auto
|
12-07-2016, 07:13 PM | #9 |
Drives: 2010 2SS/RS Join Date: Dec 2009
Location: Clarksville Tennesse.
Posts: 6,064
|
Bump for a good seller and I bought one of these wheels and restitched it, it's easy but tedious...
__________________
Orange Krush II
1LE Front sway bar, Splitter, shocks and struts, Z28 dual mode mufflers, Intake, UCA Bushings, and Toresen 3.91 Diff. 1 piece DSS Drive Shaft, ZL1/C7 Calipers, and 32mm JPSS Rear Bar. ASC race spec splitter and wicker. 6th Gen M017 Wheels. Stainless Works 1 7/8 LTs. DSE and PAFDT Suspension components. |
12-08-2016, 01:34 PM | #10 |
Drives: 2010 SS Join Date: Jun 2015
Location: Austin
Posts: 439
|
GOOD UPGRADE FOR SOMEONE. I SWAPPED MY 2010 WHEEL FOR A Z28 SUEDE WHEEL. BEST INVESTMENT IVE MADE ON THE CAR.
|
12-10-2016, 11:48 AM | #11 |
Drives: 2013 Camaro 1LE 1SS Join Date: Aug 2012
Location: Detroit
Posts: 1,252
|
Silver, the manual wheels dont have the shifter paddles, it will fit but not aure if you will get some codes for not having the paddles. Maybe the connector is different too not sure.
__________________
I work for General Motors and am not an official spokes person for General Motors. My views and opinions are my own and not those of General Motors.
|
12-11-2016, 04:59 AM | #12 |
SoCal HT5
Drives: 2010 SS , 2014 SS Join Date: Sep 2011
Location: Muscat-Oman
Posts: 1,472
|
Yeah might not work well , good luck with the sale sir!
|
12-12-2016, 11:20 AM | #13 |
Drives: 2010 Camaro 2SS/RS Join Date: Oct 2014
Location: Redmond, WA
Posts: 239
|
If the airbag will transfer out of my stock, 2010 wheel and I can use my harness for the stereo controls, I will definitely take it off your hands!
Scott
__________________
"The Beast" 2010 Camaro SS/RS LS3
Diablo T1000 with Phastek custom tune, K&N Intake, Hurst Short-Throw Shifter, Flowmaster, Outlaw II Exhaust, BMR 1" Lowering Springs, BMR 3-way Adjustable Anti-Roll Bars, BMR End Links and Reinforcement Brackets, BMR Trailing Arms, ZL1 wheels, Nitto NT555 G2 Tires, Z28-style Rear Spoiler, Hawk Plus Brake Pads, Motul RBF600 Brake Fluid |
12-12-2016, 11:36 AM | #14 |
Drives: 2010 2SS/RS Join Date: Dec 2009
Location: Clarksville Tennesse.
Posts: 6,064
|
Needs a 2012 and up airbag
__________________
Orange Krush II
1LE Front sway bar, Splitter, shocks and struts, Z28 dual mode mufflers, Intake, UCA Bushings, and Toresen 3.91 Diff. 1 piece DSS Drive Shaft, ZL1/C7 Calipers, and 32mm JPSS Rear Bar. ASC race spec splitter and wicker. 6th Gen M017 Wheels. Stainless Works 1 7/8 LTs. DSE and PAFDT Suspension components. |
|
|
|
|