MSD 2 step help - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

camaro eth eth · 01-21-2017, 12:42 PM

Installed my MSD 2 step yesterday spliced the brown clutch wire with the blue 2 step wire. The car now 2 steps at the set rpm in every gear. What do I need to do to fix this and where can I get the parts to do it. Wiring stuff is not my cup of coffee at all so help would be appreciated

jrpimp00 · 01-21-2017, 01:30 PM

Check your wiring diagram. I thought the Blue/White wire for the 8733 went to the 12v/Clutch wire

camaro eth eth · 01-21-2017, 03:30 PM

Quote:

Originally Posted by jrpimp00

Check your wiring diagram. I thought the Blue/White wire for the 8733 went to the 12v/Clutch wire

I used the blue/white wire to the blue wire to the brown wire. solid blue is a ground wire from what I was reading

01-21-2017, 12:42 PM	#1
camaro eth eth Drives: red Join Date: Jun 2016 Location: great falls montana Posts: 86	MSD 2 step help Installed my MSD 2 step yesterday spliced the brown clutch wire with the blue 2 step wire. The car now 2 steps at the set rpm in every gear. What do I need to do to fix this and where can I get the parts to do it. Wiring stuff is not my cup of coffee at all so help would be appreciated

01-21-2017, 01:30 PM	#2
jrpimp00 Drives: '10 Black/IOM Camaro SS/RS Join Date: Mar 2010 Location: Fayetteville NC Posts: 530	Check your wiring diagram. I thought the Blue/White wire for the 8733 went to the 12v/Clutch wire __________________ 2010 Camaro 2SS/RS Black/IOM //// 1998 Pontiac Trans AM 819 RWHP @ 12 PSI (Turbo)