08-12-2010, 01:10 PM | #1 |
Drives: 2010 Black Camaro SS/RS MTX Join Date: Jun 2010
Location: Upstate New York
Posts: 107
|
Endlink question.
I just installed my pfadt endlinks and sway bars. But when I go over rough roads or bumps, I hear some metal clinking from the rear. Is this normal?
|
08-12-2010, 07:06 PM | #2 |
Drives: 2010 2SS/RS M6 IOM, 1995 Blown Z28 Join Date: May 2009
Location: San Diego
Posts: 237
|
Not normal; should be quiet. Double check that you oriented the endlinks properly; there's a similar post on this board that ended up that the endlink orientation was incorrect.
__________________
2010 2SS RS M6 Inferno Orange Metallic
1995 Z28 - blown, intercooled and nitrous injected - Sold 1968 Camaro - Sold 2019 Corvette Grand Sport |
08-12-2010, 07:23 PM | #3 |
Drives: Camaro Justice Join Date: Jun 2007
Location: Virginia
Posts: 20,174
|
obe1 is correct and whenever there is a noise from a new suspension install double and triple check all the nuts are tight.
|
08-12-2010, 10:37 PM | #4 |
Drives: 2010 Black Camaro SS/RS MTX Join Date: Jun 2010
Location: Upstate New York
Posts: 107
|
figured it out, i only heard it from the driver side so i checked that endlink and realized my friend installed the driver side endlink upside down...dummy. pfadt springs and strut brace on tomorrow.
|
08-13-2010, 05:11 AM | #5 |
Drives: 2000 Camaro SS Join Date: Feb 2010
Location: Louisville, Ky.
Posts: 25,179
|
|
08-13-2010, 07:08 AM | #6 |
Drives: 2015 Chevrolet SS Join Date: Jul 2010
Location: St. Louis, MO
Posts: 341
|
|
08-21-2010, 12:11 PM | #7 |
Camaro SS Lover
Drives: 2010 Camaro 2SS/RS Black IOM Join Date: Jun 2010
Location: Toronto, Ontario (Canada)
Posts: 2,863
|
I'm having the same problem, so I'll notify my installer to check orientation of end links. Thanks folks, for feedback.
|
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Question about tire sizes | Jram1588 | Wheels and Tires Talk Sponsored by The Tire Rack | 9 | 07-17-2010 07:27 AM |
Custom wheel offset question ... | Bowtie Junkman | Wheels and Tires Talk Sponsored by The Tire Rack | 4 | 04-23-2010 05:16 PM |
Question Involving 4.10 gears & Bushings | Deric884 | V8 and V6 Transmissions / Driveline (6L80 / 6L50 / TR6060 / AY6) | 1 | 02-13-2010 06:53 AM |
Question re: c.i. displacement and hp | Arli | 5th Gen Camaro SS LS LT General Discussions | 6 | 03-24-2009 01:20 PM |
IRS question | 454lsxss | Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons | 5 | 08-30-2008 09:06 PM |