Finally got around to my gauge

[StephenS_84]

Originally Posted by kevin1106

Only way is to pull the dash.... I did mine on my old SS...

I wonder if you could air brush it.

[Chris-10]

Originally Posted by StephenS_84

How did you paint the center vent trim?

Originally Posted by ActNup NY

Do tell???

Gotta pull the dash, atleast with the 10's and i think 11's, I've had my dash out twice. It took me 50 minutes to remove it the last time.

[Chris-10]

Originally Posted by StephenS_84

Is pulling the dash a pita?

It's not the easiest thing, if you read up on it, it's really not that bad.

[kevin1106]

Originally Posted by Chris-10

It's not the easiest thing, if you read up on it, it's really not that bad.

Agreed. It's not that hard to do... For the most part all the screws and bolts are the same size... So it really doesn't matter if you don't put them back in the exact location.... I used a piece of cardboard and just pushed them in the cardboard and labeled them as I removed them.... There is a DIY here..

http://www.camaro5.com/forums/showth...ht=install+hud

[camaro2lt]

for th 2012-2013 you do not have to pull the dash just take off the upper dash trim and there are some 7mm bolts, take those out and the whole ac duct will come out along with the leather or suede part

[butters]

Looks sick, I like that a lot, that shifter too!

[ActNup NY]

Originally Posted by kevin1106

Another pic

Is there a more easier way to get these pieces out without removing the dash? My car is a daily driver.

[ActNup NY]

Originally Posted by camaro2lt

for th 2012-2013 you do not have to pull the dash just take off the upper dash trim and there are some 7mm bolts, take those out and the whole ac duct will come out along with the leather or suede part

You lucky bastards-

[Jalberdi99]

Originally Posted by Chris-10

Gotta pull the dash, atleast with the 10's and i think 11's, I've had my dash out twice. It took me 50 minutes to remove it the last time.
Attachment 509262

[StephenS_84]

Originally Posted by ActNup NY

Is there a more easier way to get these pieces out without removing the dash? My car is a daily driver.

Doesn't look like it.

[ActNup NY]

Originally Posted by StephenS_84

Doesn't look like it.

- That looks like a job I would atleast try and attempt it if I had another car, as to where I could sit this one down for awhile. But I dont.. I guess that's life

[StephenS_84]

Originally Posted by ActNup NY

- That looks like a job I would atleast try and attempt it if I had another car, as to where I could sit this one down for awhile. But I dont.. I guess that's life

I'll probably take out the dash, but I seriously thought about seeing if a painter could use an airbrush on it. I just haven't gotten around to asking one if it's even possible to airbrush.

[Chris-10]

Originally Posted by ActNup NY

Is there a more easier way to get these pieces out without removing the dash? My car is a daily driver.

Nope, that's the only way with the 10's & 11's.

[kevin1106]

Originally Posted by ActNup NY

Is there a more easier way to get these pieces out without removing the dash? My car is a daily driver.

Maybe you can try touch up paint... I don't think you'd ever get it smooth though...

Personal opinion is "best to remove the dash"

If you wanted to install a alarm.... That would be the best time... You could really hide the wires and brain....