08-24-2013, 03:40 PM | #1 |
Drives: 2014 Blue Ray Met. Camaro 1SS Vert Join Date: Feb 2012
Location: Indiana
Posts: 1,519
|
WTB: SS rotors
Looking for a nice low miles set of SS rotors in my area that someone has laying around because of an upgrade.
|
08-25-2013, 11:13 AM | #2 |
Drives: 2010 Camaro 2SS/RS Join Date: Aug 2009
Location: Vincennes, IN
Posts: 82
|
Where are you located in Indiana? I have a set with around 600 miles on them, I'm in southern in
|
08-25-2013, 11:24 AM | #3 |
Drives: 2014 Blue Ray Met. Camaro 1SS Vert Join Date: Feb 2012
Location: Indiana
Posts: 1,519
|
I am near Marion and Gas city Indiana. How much you wanting for them?
Last edited by CamaroLS; 08-25-2013 at 11:26 AM. Reason: Correction |
08-25-2013, 02:56 PM | #4 |
Drives: 2010 Camaro 2SS/RS Join Date: Aug 2009
Location: Vincennes, IN
Posts: 82
|
pm sent
|
08-25-2013, 05:46 PM | #5 |
Drives: 2014 Blue Ray Met. Camaro 1SS Vert Join Date: Feb 2012
Location: Indiana
Posts: 1,519
|
Sent one back. I want the rotors!! Thank you
|
08-25-2013, 05:53 PM | #6 |
Drives: 2011 RS Join Date: Apr 2011
Location: Florence New Jersey
Posts: 1,125
|
What are SS rotors? The rotors that come with Brembo's??
|
08-25-2013, 07:31 PM | #7 |
Drives: 2014 Blue Ray Met. Camaro 1SS Vert Join Date: Feb 2012
Location: Indiana
Posts: 1,519
|
|
08-26-2013, 02:02 AM | #8 | |
COTW [4/23/12]
Drives: Camaro Of The Week. Join Date: Aug 2011
Location: San Diego, CA
Posts: 2,088
|
and you're going to swap with your v6 calipers? if so, u need the whole setup.
__________________
Quote:
2010 Camaro V6 1LT | Kooks Catback Exhaust + MBRP exhaust tips | TF3 Stripes | GM Transformers Emblem and Door Sill | Stillen splitter | GMX rear diffuser | K&N CAI | Pulstar iridium spark plugs. | Gm High Wing Spoiler | BBK LT Headers | BMR 4 Point Strut Bar | BMR 1" Lowering Springs | ZL1 Side Skirt | Black Ice-olator | Trifecta Tune | My Build Thread |
|
08-26-2013, 05:38 PM | #9 |
Drives: 2014 Blue Ray Met. Camaro 1SS Vert Join Date: Feb 2012
Location: Indiana
Posts: 1,519
|
|
08-26-2013, 06:27 PM | #10 |
Drives: '12 2LT Convertible Join Date: Mar 2012
Location: Belmont, California
Posts: 1,701
|
What are you doing about the F&R dust shields and the master cylinder? You also need new caliper mounting bolts.
__________________
Mods: GM Locking Gas Cap, RS License Plate Frame, SS Brembos, ZL1 FrontEnd, 14/15 Convertible Top
|
08-26-2013, 07:01 PM | #11 |
Drives: 2014 Blue Ray Met. Camaro 1SS Vert Join Date: Feb 2012
Location: Indiana
Posts: 1,519
|
|
08-26-2013, 07:17 PM | #12 |
Drives: 2014 Blue Ray Met. Camaro 1SS Vert Join Date: Feb 2012
Location: Indiana
Posts: 1,519
|
Here is a write up for the upgrade to Brembo brakes.
http://www.camaro5.com/forums/showthread.php?t=62282 |
08-27-2013, 09:34 AM | #13 |
Drives: 2013 camaro ls; 2005 rx8 Join Date: Mar 2013
Location: Houston
Posts: 577
|
Stock v6 front lines will work also, but different banjo bolt thread pitch...rear lines dont work cause of the bend at the banjo bolt fitting blocks the mounting bolt (ss rear line is straight) rear banjo bolts are the same from v6 to v8...and like he said, just trim off some of the lip on rear dust shield...easy swap...i did all four in a couple hours
|
08-27-2013, 10:44 AM | #14 | |
Drives: 2014 Blue Ray Met. Camaro 1SS Vert Join Date: Feb 2012
Location: Indiana
Posts: 1,519
|
Quote:
|
|
|
|
|
|