You are browsing camaro5 
 |
|
12-09-2014, 02:16 PM
|
#1 |
   
Drives: 2015 Red Rock ZL1 Join Date: Dec 2014
Location: Panama City Beach, Florida
Posts: 1,097
|
Exhaust
Does anyone have any recommendations for a quad-tip exhaust? I didn't want the factory exhaust so I ordered the rear fascia for the quad tip seperately. I am hoping Corsa comes out with a quad-tip soon, but does anyone have any advice?
__________________
Alex
2015 Red Rock ZL1 Panama City Beach, FL  Last edited by nvydvr; 12-09-2014 at 02:22 PM. Reason: spelling |
|
|
|
12-09-2014, 02:52 PM
|
#2 |
|
Drives: 14 Camaro 1LE,328i, and some Hondas Join Date: May 2014
Location: Virginia
Posts: 799
|
You can bolt up a zl1 corsa on the 1le. You just need the diffuser. I'm running one on my car.
__________________
14' Camaro 1LE - Now self-tuned
FRH ported heads, Cam Motion LL solid roller, Jesel rockers, Morel lifters, Kooks headers, Corsa exhaust, ADM intake, Stock compression/bore/stroke 551whp 504wtq  |
|
|
|
|
12-09-2014, 02:59 PM
|
#3 |
|
Drives: 2015 Red Rock ZL1 Join Date: Dec 2014
Location: Panama City Beach, Florida
Posts: 1,097
|
Thanks, I called Corsa and they weren't sure if they'd match up. I already bought the rear fascia to accomodate the quad-tips. I appreciate your help.
__________________
Alex
2015 Red Rock ZL1 Panama City Beach, FL |
|
|
|
|
12-09-2014, 03:12 PM
|
#4 |
|
Drives: 14 Camaro 1LE,328i, and some Hondas Join Date: May 2014
Location: Virginia
Posts: 799
|
No problem. I just put mine on this past weekend. I'm extremely happy with it. Looks better than my npp, and sounds better too(my personal opinion). The corsa is more tame at cruising speeds(makes my wife happy), but when you lay into it, you know it's there.
__________________
14' Camaro 1LE - Now self-tuned
FRH ported heads, Cam Motion LL solid roller, Jesel rockers, Morel lifters, Kooks headers, Corsa exhaust, ADM intake, Stock compression/bore/stroke 551whp 504wtq |
|
|
|
|
12-09-2014, 03:55 PM
|
#5 |
|
Drives: 2015 Red Rock ZL1 Join Date: Dec 2014
Location: Panama City Beach, Florida
Posts: 1,097
|
Is it the Corsa quad-tip for the 13' ZL1 that you used? I looked on their site and that was the only quad-tip I saw. Was it a fairly easy install? Thanks for your help.
__________________
Alex
2015 Red Rock ZL1 Panama City Beach, FL |
|
|
|
|
12-09-2014, 04:05 PM
|
#6 |
|
Drives: 14 Camaro 1LE,328i, and some Hondas Join Date: May 2014
Location: Virginia
Posts: 799
|
I ordered it from Maryland speed. I'm not positive of the year so you might call them and ask. They had the best price I found anyhow.
It was the easiest exhaust install I've done to be perfectly honest. You can do it with one person, but I'd highly recommend a friend. We had the old exhaust off in 15 minutes(NPP) and the new one on and lined up in about 45 minutes. We probably could have been faster but we only had two ramps at the time so it was a tight squeeze.
__________________
14' Camaro 1LE - Now self-tuned
FRH ported heads, Cam Motion LL solid roller, Jesel rockers, Morel lifters, Kooks headers, Corsa exhaust, ADM intake, Stock compression/bore/stroke 551whp 504wtq |
|
|
|
|
03-04-2015, 10:17 PM
|
#7 |
 Drives: Honda Join Date: Mar 2015
Location: United States
Posts: 1
|
hey there is usually anybody on the market operating 295 mich super athletics. i know these kinds of operate large and also had been finding when they will probably healthy in almost all some sides.
__________________
NoorAlamShahzad
|
|
|
|
|
03-04-2015, 10:24 PM
|
#8 |
|
Drives: 2015 2SS/RS/1LE Join Date: Feb 2015
Location: Tucson
Posts: 866
|
^^^???^^^
__________________
2015 SS/RS/1LE
HSA delete, VMAX throttle body, CAI inc. Intake, PRC255 heads, BTR 660 springs, BTR cryo-treated rockers, PAT G 232/240 .654/.626 110+2, johnson 2110's, Manton 502 pushrods, C5R, Melling high volume/high pressure, Powerbond 25% underdrive pulley, Proform covers, Kooks stepped headers, catless mids, Doug Thorley exhaust. 512rwhp, 446rwtq on a mustang dyno, tuned by Cunningham motorsports.  |
|
|
|
|
03-04-2015, 10:59 PM
|
#9 | |
Drives: 2014 Camaro Red Hot 1LE NPP Recaro Join Date: Jun 2014
Location: Indiana
Posts: 639
|
Billy Boat makes some nice exhaust systems
http://www.bbexhaust.com/car/camaro-zl1/ Friend has it on his vette, this stuff is very well built and sounds awesome |
|
|
|
|
|
03-05-2015, 06:36 AM
|
#10 |
       
Drives: E92 BMW M3 Join Date: Oct 2012
Location: Houston
Posts: 4,496
|
Personally I would go with the Stainless Works Retro chambered exhaust. Best sounding aftermarket exhaust I have ever heard. Next best thing to the factory NPP.
__________________
SOLD - 2013 1LE - Pat G Spec'd Cam, NPP with 1 7/8" Long Tube Headers with High Flow Cats, Intake w/scoop, Ported Throttle Body, and Apex 1.25" Lowering Springs.
J-Rod Built and Matt@FSP Tuned  |
|
|
|
|
03-05-2015, 09:51 AM
|
#11 | |
Drives: 2014 Camaro 2SS 1LE NPP Join Date: Nov 2013
Location: Hartsdale, NY
Posts: 1,434
|
Quote:
Don't do drugs! |
|
|
|
|
|
03-05-2015, 10:05 AM
|
#12 | |
Drives: '16 Z06/Z07, '15 Z/28,1972 Stingray Join Date: Feb 2013
Location: Drivers Seat
Posts: 837
|
Quote:
|
|
|
|
|
|
03-05-2015, 11:00 AM
|
#13 |
|
Destroyed by flooding
Drives: Wife's car Join Date: Mar 2014
Location: Louisiana
Posts: 4,673
|
Drives a Honda...
|
|
|
|
|
03-05-2015, 04:34 PM
|
#14 |
 Drives: 2014 Summit White 1LE Join Date: Sep 2013
Location: Diamond Bar, CA
Posts: 173
|
+1 for ZL1 Stainless Works Retro
|
|
|
|
|
|
|
|
 |
| Tags |
| 1le camaro, exhaust, quad-tip |
|
|
