04-22-2015, 11:02 AM | #1 |
|
Finally painted my Brembos
Been a minute since I've posted any new pics. I been to busy admiring the creativity of others on here along with work. A good buddy and I painted my Brembos. I had three choices in mind- 1st I was thinking black and red, then I even thought of doing black on black, (cool thought, but wasn't sure how it would really come out), and then I finally decided on black on white.
Your thoughts? Sent from my iPhone using Tapatalk
__________________
The DREAM is free... It's the HUSTLE that is sold seperately
|
04-22-2015, 08:21 PM | #2 |
Counting down the days...
Drives: Black 2011 2SS/RS Join Date: Mar 2011
Location: Fort Walton Beach, Fl
Posts: 637
|
Looks good! What paint did you use?
__________________
Tick Performance Custom Cam w/ support mods/BBK LT Headers w/ midpipes/Straight Exhaust/Airaid Cold Air Intake/ZL1 Driveshaft/ZL1 Differential/Hendrix Engineering Offset Bushings/ZL1 Axles/BMR Rear Subframe Bushings/BMR Toe Rods/Carlyle Racing 15" Conversion/Jannetty Winsheild Bottle Scoop/Forgestar 15x10 Beadlocks wrapped in Mickey Thompson Radial Pros
|
04-22-2015, 09:51 PM | #3 |
|
Thanks I appreciate that. I used the VHT flat black can and VHT gloss clear.
Sent from my iPhone using Tapatalk
__________________
The DREAM is free... It's the HUSTLE that is sold seperately
|
04-22-2015, 11:45 PM | #4 |
Drives: Camaro SS 2014 Join Date: Jan 2015
Location: Texas
Posts: 322
|
came out really nice! I would like to do this but have no idea how to lol
|
04-23-2015, 03:48 AM | #5 | |
|
Finally painted my Brembos
Quote:
It's very easy I just went to the DIY section read over a few threads of folks who've done this before me and just did it. Lol ! Like many have said before the KEY is the prep work. I made sure to clean and scrub the calipers really well. Then I hit it with the primer (take that -take that.. Little Puff Daddy) . Let that settle for an hour or so. In that time treated my boy to lunch at the diner. By the time we came back it was ready for the flat black, and after that dried for a few hit it with the gloss. But just check out the DIY section- painted calipers. GL if you do attempt to do it. Thxs for the love I appreciate it Sent from my iPhone using Tapatalk
__________________
The DREAM is free... It's the HUSTLE that is sold seperately
|
|
04-23-2015, 08:44 AM | #6 |
Drives: 2010 Camaro 2SS/RS Black & Silver Join Date: Aug 2010
Location: Richmond, VA
Posts: 8,228
|
Nice!
__________________
STAINLESS WORKS HEADERS-TUNED BY JANNETTY RACING-C.A.I. INTAKE-TAYLOR 409 WIRES-SOLO AXLE BACK EXHAUST-ELITE CATCH CAN |
05-01-2015, 01:17 AM | #7 |
|
__________________
The DREAM is free... It's the HUSTLE that is sold seperately
|
05-01-2015, 02:35 PM | #8 |
Drives: '12 2LT Convertible Join Date: Mar 2012
Location: Belmont, California
Posts: 1,701
|
I like your white on black. Did you clear coat on top of the sticker?
__________________
Mods: GM Locking Gas Cap, RS License Plate Frame, SS Brembos, ZL1 FrontEnd, 14/15 Convertible Top
Last edited by intensifi; 05-01-2015 at 03:02 PM. |
05-01-2015, 02:38 PM | #9 |
Flying da helicopter
|
They came out really good. I was thinking about painting mine inferno orange to match my stripes. Not sure how that will come out.
|
05-01-2015, 04:14 PM | #10 | |
|
Quote:
Thxs ! Way just trying to be different. Yes I did clear the decal . When I put it on the car I'm a post pic along with my R1 Rotors slot/dimples. Can't wait . Hope it all comes along nice ! Sent from my iPhone using Tapatalk
__________________
The DREAM is free... It's the HUSTLE that is sold seperately
|
|
|
|
|
|